lkml.org 
[lkml]   [2010]   [May]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
DateMon, 3 May 2010 08:34:49 +0200
FromBruno Prémont <>
SubjectRe: s2ram slow (radeon) / failing (usb)
On Sun, 2 May 2010 17:59:17 -0400 (EDT) Alan Stern wrote:
> On Sun, 2 May 2010, Bruno [UTF-8] Prémont wrote:
>
> > > There's no way to fix the USB problem without knowing what goes
> > > wrong. Let's see how far you get before the system freezes on a
> > > kernel with CONFIG_USB_DEBUG enabled.
> >
> > Am I missing something?
> >
> > I've enabled CONFIG_USB_DEBUG but don't see any additional module
> > parameter nor anything extra to toggle and I don't get more output
> > than without it.
>
> Depends what you mean by "output". The kernel generates more log
> messages, but they may not get sent to your console. You need to
> make sure the console's log level is set high enough to see debugging
> messages. For example:
>
> echo 9 >/proc/sys/kernel/printk
>
> or type Alt-SysRq-9.

I've been doing `dmesg -n 8` (9 is rejected as invalid) so it should
send out everything.
It looked like there was some more output during boot-up, but nothing
during suspend, at least up to the freezing point.

Bruno
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2010-05-03 08:37    [from the cache]
©2003-2010