lkml.org 
[lkml]   [2010]   [May]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC] [PATCH] misc : ROHM BH1780GLI Ambient light sensor Driver
On Fri, May 21, 2010 at 06:10:00PM +0530, Hemanth V wrote:
> >On Fri, May 21, 2010 at 05:05:50PM +0530, Hemanth V wrote:
> >>+ mutex_lock(&ddata->lock);
> >>+
> >>+ error = bh1780_write(ddata, BH1780_REG_CONTROL, val, "CONTROL");
> >>+ if (error < 0) {
> >>+ mutex_unlock(&ddata->lock);
> >>+ return error;
> >>+ }
> >>+
> >>+ msleep(BH1780_PON_DELAY);
> >
> >Hmm, what do you wait for here?
>
> Settling time delay required before lux read out

I thought so, but in fact you're just delaying the next two lines by
that:

> >>+ ddata->power_state = val;
> >>+ mutex_unlock(&ddata->lock);

... which doesn't make sense to me.

I can believe there is need to wait for the value to settle, but I think
it's the wrong place where you're doing it currently.

> >>+static int __devinit bh1780_probe(struct i2c_client *client,
> >>+ const struct i2c_device_id *id)
> >>+{
> >>+ int ret;
> >>+ struct bh1780_data *ddata = NULL;
> >
> >The initialization isn't needed.
>
> This is basically added for the first goto error, to prevent
> any garbage values

Sorry, you're right. Ignore this comment :)

Thanks,
Daniel



\
 
 \ /
  Last update: 2010-05-21 14:49    [W:0.045 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site