lkml.org 
[lkml]   [2010]   [Apr]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 07/14] m68k: amiga - A3000 SCSI platform device conversion
Date
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-scsi@vger.kernel.org
---
arch/m68k/amiga/platform.c | 11 +++
drivers/scsi/a3000.c | 164 +++++++++++++++++++++++++++-----------------
2 files changed, 111 insertions(+), 64 deletions(-)
diff --git a/arch/m68k/amiga/platform.c b/arch/m68k/amiga/platform.c
index 38f18bf..df1fae3 100644
--- a/arch/m68k/amiga/platform.c
+++ b/arch/m68k/amiga/platform.c
@@ -58,6 +58,13 @@ subsys_initcall(amiga_init_bus);
#endif /* CONFIG_ZORRO */


+static const struct resource a3000_scsi_resource __initconst = {
+ .start = 0xdd0000,
+ .end = 0xdd00ff,
+ .flags = IORESOURCE_MEM,
+};
+
+
static int __init amiga_init_devices(void)
{
if (!MACH_IS_AMIGA)
@@ -77,6 +84,10 @@ static int __init amiga_init_devices(void)
if (AMIGAHW_PRESENT(AMI_FLOPPY))
platform_device_register_simple("amiga-floppy", -1, NULL, 0);

+ if (AMIGAHW_PRESENT(A3000_SCSI))
+ platform_device_register_simple("amiga-a3000-scsi", -1,
+ &a3000_scsi_resource, 1);
+
return 0;
}

diff --git a/drivers/scsi/a3000.c b/drivers/scsi/a3000.c
index 79a4a3c..7f09d89 100644
--- a/drivers/scsi/a3000.c
+++ b/drivers/scsi/a3000.c
@@ -1,28 +1,21 @@
#include <linux/types.h>
#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/blkdev.h>
#include <linux/ioport.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
+#include <linux/platform_device.h>

-#include <asm/setup.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/amigaints.h>
#include <asm/amigahw.h>
-#include <asm/irq.h>

#include "scsi.h"
-#include <scsi/scsi_host.h>
#include "wd33c93.h"
#include "a3000.h"

-#include <linux/stat.h>
-
-
-static int a3000_release(struct Scsi_Host *instance);

static irqreturn_t a3000_intr(int irq, void *data)
{
@@ -39,7 +32,7 @@ static irqreturn_t a3000_intr(int irq, void *data)
spin_unlock_irqrestore(instance->host_lock, flags);
return IRQ_HANDLED;
}
- printk("Non-serviced A3000 SCSI-interrupt? ISTR = %02x\n", status);
+ pr_warning("Non-serviced A3000 SCSI-interrupt? ISTR = %02x\n", status);
return IRQ_NONE;
}

@@ -162,93 +155,136 @@ static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt,
}
}

-static int __init a3000_detect(struct scsi_host_template *tpnt)
+static int a3000_bus_reset(struct scsi_cmnd *cmd)
+{
+ struct Scsi_Host *instance = cmd->device->host;
+
+ /* FIXME perform bus-specific reset */
+
+ /* FIXME 2: kill this entire function, which should
+ cause mid-layer to call wd33c93_host_reset anyway? */
+
+ spin_lock_irq(instance->host_lock);
+ wd33c93_host_reset(cmd);
+ spin_unlock_irq(instance->host_lock);
+
+ return SUCCESS;
+}
+
+static struct scsi_host_template amiga_a3000_scsi_template = {
+ .module = THIS_MODULE,
+ .name = "Amiga 3000 built-in SCSI",
+ .proc_info = wd33c93_proc_info,
+ .proc_name = "A3000",
+ .queuecommand = wd33c93_queuecommand,
+ .eh_abort_handler = wd33c93_abort,
+ .eh_bus_reset_handler = a3000_bus_reset,
+ .eh_host_reset_handler = wd33c93_host_reset,
+ .can_queue = CAN_QUEUE,
+ .this_id = 7,
+ .sg_tablesize = SG_ALL,
+ .cmd_per_lun = CMD_PER_LUN,
+ .use_clustering = ENABLE_CLUSTERING
+};
+
+static int __init amiga_a3000_scsi_probe(struct platform_device *pdev)
{
+ struct resource *res;
struct Scsi_Host *instance;
- wd33c93_regs wdregs;
+ int error;
struct a3000_scsiregs *regs;
+ wd33c93_regs wdregs;
struct WD33C93_hostdata *hdata;

- if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(A3000_SCSI))
- return 0;
- if (!request_mem_region(0xDD0000, 256, "wd33c93"))
- return 0;
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;

- tpnt->proc_name = "A3000";
- tpnt->proc_info = &wd33c93_proc_info;
+ if (!request_mem_region(res->start, resource_size(res), "wd33c93"))
+ return -EBUSY;

- instance = scsi_register(tpnt, sizeof(struct WD33C93_hostdata));
- if (instance == NULL)
- goto fail_register;
+ instance = scsi_host_alloc(&amiga_a3000_scsi_template,
+ sizeof(struct WD33C93_hostdata));
+ if (!instance) {
+ error = -ENOMEM;
+ goto fail_alloc;
+ }

- instance->base = ZTWO_VADDR(0xDD0000);
+ instance->base = ZTWO_VADDR(res->start);
instance->irq = IRQ_AMIGA_PORTS;
+
regs = (struct a3000_scsiregs *)(instance->base);
regs->DAWR = DAWR_A3000;
+
wdregs.SASR = &regs->SASR;
wdregs.SCMD = &regs->SCMD;
+
hdata = shost_priv(instance);
hdata->no_sync = 0xff;
hdata->fast = 0;
hdata->dma_mode = CTRL_DMA;
+
wd33c93_init(instance, wdregs, dma_setup, dma_stop, WD33C93_FS_12_15);
- if (request_irq(IRQ_AMIGA_PORTS, a3000_intr, IRQF_SHARED, "A3000 SCSI",
- instance))
+ error = request_irq(IRQ_AMIGA_PORTS, a3000_intr, IRQF_SHARED,
+ "A3000 SCSI", instance);
+ if (error)
goto fail_irq;
+
regs->CNTR = CNTR_PDMD | CNTR_INTEN;

- return 1;
+ error = scsi_add_host(instance, NULL);
+ if (error)
+ goto fail_host;

-fail_irq:
- scsi_unregister(instance);
-fail_register:
- release_mem_region(0xDD0000, 256);
+ platform_set_drvdata(pdev, instance);
+
+ scsi_scan_host(instance);
return 0;
+
+fail_host:
+ free_irq(IRQ_AMIGA_PORTS, instance);
+fail_irq:
+ scsi_host_put(instance);
+fail_alloc:
+ release_mem_region(res->start, resource_size(res));
+ return error;
}

-static int a3000_bus_reset(struct scsi_cmnd *cmd)
+static int __exit amiga_a3000_scsi_remove(struct platform_device *pdev)
{
- /* FIXME perform bus-specific reset */
-
- /* FIXME 2: kill this entire function, which should
- cause mid-layer to call wd33c93_host_reset anyway? */
-
- spin_lock_irq(cmd->device->host->host_lock);
- wd33c93_host_reset(cmd);
- spin_unlock_irq(cmd->device->host->host_lock);
+ struct Scsi_Host *instance = platform_get_drvdata(pdev);
+ struct a3000_scsiregs *regs = (struct a3000_scsiregs *)(instance->base);
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);

- return SUCCESS;
+ regs->CNTR = 0;
+ scsi_remove_host(instance);
+ free_irq(IRQ_AMIGA_PORTS, instance);
+ scsi_host_put(instance);
+ release_mem_region(res->start, resource_size(res));
+ return 0;
}

-#define HOSTS_C
-
-static struct scsi_host_template driver_template = {
- .proc_name = "A3000",
- .name = "Amiga 3000 built-in SCSI",
- .detect = a3000_detect,
- .release = a3000_release,
- .queuecommand = wd33c93_queuecommand,
- .eh_abort_handler = wd33c93_abort,
- .eh_bus_reset_handler = a3000_bus_reset,
- .eh_host_reset_handler = wd33c93_host_reset,
- .can_queue = CAN_QUEUE,
- .this_id = 7,
- .sg_tablesize = SG_ALL,
- .cmd_per_lun = CMD_PER_LUN,
- .use_clustering = ENABLE_CLUSTERING
+static struct platform_driver amiga_a3000_scsi_driver = {
+ .remove = __exit_p(amiga_a3000_scsi_remove),
+ .driver = {
+ .name = "amiga-a3000-scsi",
+ .owner = THIS_MODULE,
+ },
};

-
-#include "scsi_module.c"
-
-static int a3000_release(struct Scsi_Host *instance)
+static int __init amiga_a3000_scsi_init(void)
{
- struct a3000_scsiregs *regs = (struct a3000_scsiregs *)(instance->base);
+ return platform_driver_probe(&amiga_a3000_scsi_driver,
+ amiga_a3000_scsi_probe);
+}
+module_init(amiga_a3000_scsi_init);

- regs->CNTR = 0;
- release_mem_region(0xDD0000, 256);
- free_irq(IRQ_AMIGA_PORTS, a3000_intr);
- return 1;
+static void __exit amiga_a3000_scsi_exit(void)
+{
+ platform_driver_unregister(&amiga_a3000_scsi_driver);
}
+module_exit(amiga_a3000_scsi_exit);

+MODULE_DESCRIPTION("Amiga 3000 built-in SCSI");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:amiga-a3000-scsi");
--
1.6.0.4


\
 
 \ /
  Last update: 2010-04-23 10:05    [from the cache]
©2003-2014 Jasper Spaans. Advertise on this site