lkml.org 
[lkml]   [2010]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] Crypto: geode-aes: Fix some code style issues
Date
From: Chihau Chau <chihau@gmail.com>

This fixes some code style issues like:

- Use #include <linux/io.h> instead of <asm/io.h> and #include
<linux/delay.h> instead of <asm/delay.h>

- Use "foo *bar" instead of "foo * bar"

- Add a space after the for or while sentence and before the open
parenthesis '('

- Don't use assignments in a if condition

Signed-off-by: Chihau Chau <chihau@gmail.com>
---
drivers/crypto/geode-aes.c | 36 ++++++++++++++++++++----------------
1 files changed, 20 insertions(+), 16 deletions(-)

diff --git a/drivers/crypto/geode-aes.c b/drivers/crypto/geode-aes.c
index c7a5a43..09389dd 100644
--- a/drivers/crypto/geode-aes.c
+++ b/drivers/crypto/geode-aes.c
@@ -15,14 +15,14 @@
#include <crypto/algapi.h>
#include <crypto/aes.h>

-#include <asm/io.h>
-#include <asm/delay.h>
+#include <linux/io.h>
+#include <linux/delay.h>

#include "geode-aes.h"

/* Static structures */

-static void __iomem * _iobase;
+static void __iomem *_iobase;
static spinlock_t lock;

/* Write a 128 bit field (either a writable key or IV) */
@@ -30,7 +30,7 @@ static inline void
_writefield(u32 offset, void *value)
{
int i;
- for(i = 0; i < 4; i++)
+ for (i = 0; i < 4; i++)
iowrite32(((u32 *) value)[i], _iobase + offset + (i * 4));
}

@@ -39,7 +39,7 @@ static inline void
_readfield(u32 offset, void *value)
{
int i;
- for(i = 0; i < 4; i++)
+ for (i = 0; i < 4; i++)
((u32 *) value)[i] = ioread32(_iobase + offset + (i * 4));
}

@@ -59,7 +59,7 @@ do_crypt(void *src, void *dst, int len, u32 flags)
do {
status = ioread32(_iobase + AES_INTR_REG);
cpu_relax();
- } while(!(status & AES_INTRA_PENDING) && --counter);
+ } while (!(status & AES_INTRA_PENDING) && --counter);

/* Clear the event */
iowrite32((status & 0xFF) | AES_INTRA_PENDING, _iobase + AES_INTR_REG);
@@ -317,7 +317,7 @@ geode_cbc_decrypt(struct blkcipher_desc *desc,
err = blkcipher_walk_virt(desc, &walk);
op->iv = walk.iv;

- while((nbytes = walk.nbytes)) {
+ while ((nbytes = walk.nbytes)) {
op->src = walk.src.virt.addr,
op->dst = walk.dst.virt.addr;
op->mode = AES_MODE_CBC;
@@ -349,7 +349,7 @@ geode_cbc_encrypt(struct blkcipher_desc *desc,
err = blkcipher_walk_virt(desc, &walk);
op->iv = walk.iv;

- while((nbytes = walk.nbytes)) {
+ while ((nbytes = walk.nbytes)) {
op->src = walk.src.virt.addr,
op->dst = walk.dst.virt.addr;
op->mode = AES_MODE_CBC;
@@ -429,7 +429,7 @@ geode_ecb_decrypt(struct blkcipher_desc *desc,
blkcipher_walk_init(&walk, dst, src, nbytes);
err = blkcipher_walk_virt(desc, &walk);

- while((nbytes = walk.nbytes)) {
+ while ((nbytes = walk.nbytes)) {
op->src = walk.src.virt.addr,
op->dst = walk.dst.virt.addr;
op->mode = AES_MODE_ECB;
@@ -459,7 +459,7 @@ geode_ecb_encrypt(struct blkcipher_desc *desc,
blkcipher_walk_init(&walk, dst, src, nbytes);
err = blkcipher_walk_virt(desc, &walk);

- while((nbytes = walk.nbytes)) {
+ while ((nbytes = walk.nbytes)) {
op->src = walk.src.virt.addr,
op->dst = walk.dst.virt.addr;
op->mode = AES_MODE_ECB;
@@ -518,11 +518,12 @@ static int __devinit
geode_aes_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
int ret;
-
- if ((ret = pci_enable_device(dev)))
+ ret = pci_enable_device(dev);
+ if (ret)
return ret;

- if ((ret = pci_request_regions(dev, "geode-aes")))
+ ret = pci_request_regions(dev, "geode-aes");
+ if (ret)
goto eenable;

_iobase = pci_iomap(dev, 0, 0);
@@ -537,13 +538,16 @@ geode_aes_probe(struct pci_dev *dev, const struct pci_device_id *id)
/* Clear any pending activity */
iowrite32(AES_INTR_PENDING | AES_INTR_MASK, _iobase + AES_INTR_REG);

- if ((ret = crypto_register_alg(&geode_alg)))
+ ret = crypto_register_alg(&geode_alg);
+ if (ret)
goto eiomap;

- if ((ret = crypto_register_alg(&geode_ecb_alg)))
+ ret = crypto_register_alg(&geode_ecb_alg);
+ if (ret)
goto ealg;

- if ((ret = crypto_register_alg(&geode_cbc_alg)))
+ ret = crypto_register_alg(&geode_cbc_alg);
+ if (ret)
goto eecb;

printk(KERN_NOTICE "geode-aes: GEODE AES engine enabled.\n");
--
1.5.6.3


\
 
 \ /
  Last update: 2010-04-15 19:21    [W:0.054 / U:0.824 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site