lkml.org 
[lkml]   [2010]   [Apr]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2.6.34-rc4 4/8] mx5: Add USB OTG port registration
On Tue, Apr 13, 2010 at 11:10:27AM -0500, Dinh.Nguyen@freescale.com wrote:
> This patch adds the device platform registration for enabling USB
> host functionality on the OTG port on Freescale MX51 Babbage HW. This
> file makes platform specific calls to initialize the USB HW.
>
> This patch applies to 2.6.34-rc4.
>
> Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com>
> ---
> arch/arm/mach-mx5/Makefile | 2 +-
> arch/arm/mach-mx5/board-mx51_babbage.c | 4 ++
> arch/arm/mach-mx5/usb_dr.c | 57 ++++++++++++++++++++++++++++++++
> 3 files changed, 62 insertions(+), 1 deletions(-)
> create mode 100644 arch/arm/mach-mx5/usb_dr.c
>
> diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
> index bf23f86..3fca1f1 100644
> --- a/arch/arm/mach-mx5/Makefile
> +++ b/arch/arm/mach-mx5/Makefile
> @@ -3,7 +3,7 @@
> #
>
> # Object file lists.
> -obj-y := cpu.o mm.o clock-mx51.o devices.o
> +obj-y := cpu.o mm.o clock-mx51.o devices.o usb_dr.o
>
> obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o
>
> diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
> index afbe400..4e196d7 100644
> --- a/arch/arm/mach-mx5/board-mx51_babbage.c
> +++ b/arch/arm/mach-mx5/board-mx51_babbage.c
> @@ -27,6 +27,8 @@
>
> #include "devices.h"
>
> +extern void __init mx5_usb_dr_init(void);
> +
> static struct platform_device *devices[] __initdata = {
> &mxc_fec_device,
> };
> @@ -78,6 +80,8 @@ static void __init mxc_board_init(void)
> platform_add_devices(devices, ARRAY_SIZE(devices));
>
> mxc_register_gpios();
> +
> + mx5_usb_dr_init();
> }
>
> static void __init mx51_babbage_timer_init(void)
> diff --git a/arch/arm/mach-mx5/usb_dr.c b/arch/arm/mach-mx5/usb_dr.c
> new file mode 100644
> index 0000000..52273ea
> --- /dev/null
> +++ b/arch/arm/mach-mx5/usb_dr.c
> @@ -0,0 +1,57 @@
> +/*
> + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
> + * MA 02110-1301, USA.
> + */
> +
> +#include <linux/platform_device.h>
> +#include <mach/mxc_ehci.h>
> +#include <mach/common.h>
> +#include "devices.h"
> +
> +extern int usbotg_init(struct platform_device *pdev);
> +extern int usbotg_uninit(struct platform_device *pdev);
> +
> +static int usbotg_init_ext(struct platform_device *pdev);
> +static int usbotg_uninit_ext(struct platform_device *pdev);
> +
> +/*
> + * platform data structs
> + * - Which one to use is determined by CONFIG options in usb.h
> + * - operating_mode plugged at run time
> + */
> +static struct mxc_usbh_platform_data dr_utmi_config = {
> + .init = usbotg_init_ext,
> + .exit = usbotg_uninit_ext,
> + .portsc = MXC_EHCI_UTMI_16BIT,
> + .flags = MXC_EHCI_INTERNAL_PHY,
> +};

This is also board specific, and nothing you should assume for all
boards. Other implementations may do this differntly, which is why
this belongs to board code.

> +/* Notes: configure USB clock*/
> +static int usbotg_init_ext(struct platform_device *pdev)
> +{
> + return usbotg_init(pdev);
> +}
> +
> +static int usbotg_uninit_ext(struct platform_device *pdev)
> +{
> + return usbotg_uninit(pdev);
> +}
> +
> +void __init mx5_usb_dr_init(void)
> +{
> + mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
> +}

What's the reason for having the _ext variants that are just wrapers?


\
 
 \ /
  Last update: 2010-04-13 19:33    [W:0.148 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site