lkml.org 
[lkml]   [2010]   [Mar]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    Subject[2.6.34-rc1][libata] regression?
    hello,


    with .34-rc1 i see some "stalls"; systems is frozen for say 30seconds, then comes backs to life
    The only clue i have is strange ATA logs that I didn't have before, see below.
    My disk may be dying, it's 6 years old, but i shows the messages only in .34-rc1, never in .33 or .32

    If the stalls are unrelated to ata, how could I debug that with perf? i got lots of 'WARNING: failed to keep up with mmap data' when using perf top....
    '

    thx
    Etienne

    lscpi
    00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 03)

    cat /var/log/messages
    Mar 9 21:13:08 etienne-desktop kernel: ata1: clearing spurious IRQ
    Mar 9 21:13:38 etienne-desktop kernel: ata1: lost interrupt (Status 0x50)
    Mar 9 21:13:38 etienne-desktop kernel: ata1: soft resetting link
    Mar 9 21:13:39 etienne-desktop kernel: ata1.00: configured for UDMA/133
    Mar 9 21:13:39 etienne-desktop kernel: ata1.00: device reported invalid CHS sector 0
    Mar 9 21:13:39 etienne-desktop kernel: ata1: EH complete
    Mar 9 21:19:01 etienne-desktop kernel: ata1: clearing spurious IRQ
    Mar 9 21:19:31 etienne-desktop kernel: ata1: lost interrupt (Status 0x50)
    Mar 9 21:19:31 etienne-desktop kernel: ata1: soft resetting link
    Mar 9 21:19:32 etienne-desktop kernel: ata1.00: configured for UDMA/133
    Mar 9 21:19:32 etienne-desktop kernel: ata1.00: device reported invalid CHS sector 0
    Mar 9 21:19:32 etienne-desktop kernel: ata1: EH complete

    dmesg
    libata version 3.00 loaded.
    ata_piix 0000:00:1f.2: version 2.13
    ata_piix 0000:00:1f.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
    ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
    ata_piix 0000:00:1f.2: setting latency timer to 64
    scsi0 : ata_piix
    scsi1 : ata_piix
    ata1: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 20
    ata2: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 20
    ata1.00: ATA-6: ST3160023AS, 8.05, max UDMA/133
    ata1.00: 312581808 sectors, multi 8: LBA48
    ata1.00: configured for UDMA/133




    \
     
     \ /
      Last update: 2010-03-09 22:59    [W:0.028 / U:64.760 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site