lkml.org 
[lkml]   [2010]   [Mar]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCHv3] drivers/net/usb: Add new driver ipheth
From
Date
On Wed, 2010-03-31 at 21:42 +0200, L. Alberto Giménez wrote:
[...]
> --- /dev/null
> +++ b/drivers/net/usb/ipheth.c
[...]
> +#include <linux/kernel.h>
> +#include <linux/errno.h>
> +#include <linux/init.h>
> +#include <linux/slab.h>
> +#include <linux/module.h>
> +#include <linux/netdevice.h>
> +#include <linux/etherdevice.h>
> +#include <linux/ethtool.h>
> +#include <linux/uaccess.h>

I don't think you need this header.

> +#include <linux/usb.h>
> +#include <linux/workqueue.h>
> +
> +#define USB_VENDOR_APPLE 0x05ac
> +#define USB_PRODUCT_IPHETH 0x1290
> +#define USB_PRODUCT_IPHETH_3G 0x1292
> +#define USB_PRODUCT_IPHETH_3GS 0x1294

Apple doesn't assign device ids to ipheth so either the names are
incorrect or you should get proper device ids. I believe the Linux
Foundation has a USB vendor id and could assign device ids under that.

> +struct ipheth_device {
> + struct usb_device *udev;
> + struct usb_interface *intf;
> + struct net_device *net;
> + struct net_device_stats stats;

You can store stats in the net_device.

> + struct sk_buff *tx_skb;
> + struct urb *tx_urb;
> + struct urb *rx_urb;
> + unsigned char *tx_buf;
> + unsigned char *rx_buf;
> + unsigned char *ctrl_buf;
> + __u8 bulk_in;
> + __u8 bulk_out;

No need for the double-underscores; that's a convention for use in
definitions shared with user-space.

> + struct delayed_work carrier_work;
> +};
[...]
> +static int ipheth_open(struct net_device *net)
> +{
> + struct ipheth_device *dev = netdev_priv(net);
> + struct usb_device *udev = dev->udev;
> + int retval = 0;
> +
> + usb_set_interface(udev, IPHETH_INTFNUM, IPHETH_ALT_INTFNUM);
> + usb_clear_halt(udev, usb_rcvbulkpipe(udev, dev->bulk_in));
> + usb_clear_halt(udev, usb_sndbulkpipe(udev, dev->bulk_out));
> +
> + retval = ipheth_carrier_set(dev);
> + if (retval)
> + goto error;
> +
> + retval = ipheth_rx_submit(dev, GFP_KERNEL);
> + if (retval)
> + goto error;
> +
> + schedule_delayed_work(&dev->carrier_work, IPHETH_CARRIER_CHECK_TIMEOUT);
> + netif_start_queue(net);
> +error:
> + return retval;
> +}

There is no cleanup here (and none appears to be needed) so you could
take out the label and replace the gotos with returns.

> +static int ipheth_tx(struct sk_buff *skb, struct net_device *net)
> +{
> + struct ipheth_device *dev = netdev_priv(net);
> + struct usb_device *udev = dev->udev;
> + int retval;
> +
> + /* Paranoid */
> + if (skb->len > IPHETH_BUF_SIZE) {
> + err("%s: skb too large: %d bytes", __func__, skb->len);
> + dev->stats.tx_dropped++;
> + dev_kfree_skb_irq(skb);
> + goto exit;
> + }

Use WARN here as this would indicate a bug.

Again the goto is unnecessary.

> + memset(dev->tx_buf, 0, IPHETH_BUF_SIZE);
> + memcpy(dev->tx_buf, skb->data, skb->len);

This is wasteful. If you really must pad the buffer then do so, but
don't clear the area that is going to be filled with real data.

> + usb_fill_bulk_urb(dev->tx_urb, udev,
> + usb_sndbulkpipe(udev, dev->bulk_out),
> + dev->tx_buf, IPHETH_BUF_SIZE,
> + ipheth_sndbulk_callback,
> + dev);
> + dev->tx_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
> +
> + retval = usb_submit_urb(dev->tx_urb, GFP_ATOMIC);
> + if (retval) {
> + err("%s: usb_submit_urb: %d", __func__, retval);
> + dev->stats.tx_errors++;
> + dev_kfree_skb_irq(skb);
> + } else {
> + net->trans_start = jiffies;

No longer needed.

> + dev->tx_skb = skb;
> +
> + dev->stats.tx_packets++;
> + dev->stats.tx_bytes += skb->len;
> + netif_stop_queue(net);
> + }
> +exit:
> + return NETDEV_TX_OK;
> +}
[...]
> +#ifdef HAVE_NET_DEVICE_OPS
> +static const struct net_device_ops ipheth_netdev_ops = {
> + .ndo_open = &ipheth_open,
> + .ndo_stop = &ipheth_close,
> + .ndo_start_xmit = &ipheth_tx,
> + .ndo_tx_timeout = &ipheth_tx_timeout,
> + .ndo_get_stats = &ipheth_stats,
> +};
> +#endif

Remove the #ifdef, there is no question whether we have net_device_ops.

> +static int ipheth_probe(struct usb_interface *intf,
> + const struct usb_device_id *id)
> +{
[...]
> +#ifdef HAVE_NET_DEVICE_OPS
> + netdev->netdev_ops = &ipheth_netdev_ops;
> +#else /* CONFIG_COMPAT_NET_DEV_OPS */
> + netdev->open = &ipheth_open;
> + netdev->stop = &ipheth_close;
> + netdev->hard_start_xmit = &ipheth_tx;
> + netdev->tx_timeout = &ipheth_tx_timeout;
> + netdev->get_stats = &ipheth_stats;
> +#endif
[...]

Similarly here.

As a general point, you should now be using netdev_err(), netdev_info(),
etc. for logging messages related to net devices.

I have no idea about USB so I haven't checked the USB API usage at all.

Ben.

--
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2010-04-01 01:21    [from the cache]
©2003-2011 Jasper Spaans