lkml.org 
[lkml]   [2010]   [Mar]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] netdev/fec.c: add phylib supporting to enable carrier detection (v2)
On Wed, Mar 31, 2010 at 08:10:44PM +0800, Bryan Wu wrote:
> BugLink: http://bugs.launchpad.net/bugs/457878
>
> v2:
> - remove duplicated phy_speed caculation
> - fix the phy_speed caculation according to the DataSheet
>
> v1:
> - removed old MII phy control code
> - add phylib supporting
> - add ethtool interface to make user space NetworkManager works
>
> Tested on Freescale i.MX51 Babbage board.
>
> This patch is based on a patch from Frederic Rodo <fred.rodo@gmail.com>
>
> Cc: Frederic Rodo <fred.rodo@gmail.com>
> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>

Acked-by: Sascha Hauer <s.hauer@pengutronix.de>

Sascha

> ---
> drivers/net/Kconfig | 1 +
> drivers/net/fec.c | 1128 ++++++++++++---------------------------------------
> 2 files changed, 252 insertions(+), 877 deletions(-)
>
> diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
> index 0ba5b8e..41f6a70 100644
> --- a/drivers/net/Kconfig
> +++ b/drivers/net/Kconfig
> @@ -1916,6 +1916,7 @@ config FEC
> bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)"
> depends on M523x || M527x || M5272 || M528x || M520x || M532x || \
> MACH_MX27 || ARCH_MX35 || ARCH_MX25 || ARCH_MX5
> + select PHYLIB
> help
> Say Y here if you want to use the built-in 10/100 Fast ethernet
> controller on some Motorola ColdFire and Freescale i.MX processors.
> diff --git a/drivers/net/fec.c b/drivers/net/fec.c
> index 9f98c1c..848eb19 100644
> --- a/drivers/net/fec.c
> +++ b/drivers/net/fec.c
> @@ -40,6 +40,7 @@
> #include <linux/irq.h>
> #include <linux/clk.h>
> #include <linux/platform_device.h>
> +#include <linux/phy.h>
>
> #include <asm/cacheflush.h>
>
> @@ -61,7 +62,6 @@
> * Define the fixed address of the FEC hardware.
> */
> #if defined(CONFIG_M5272)
> -#define HAVE_mii_link_interrupt
>
> static unsigned char fec_mac_default[] = {
> 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> @@ -86,23 +86,6 @@ static unsigned char fec_mac_default[] = {
> #endif
> #endif /* CONFIG_M5272 */
>
> -/* Forward declarations of some structures to support different PHYs */
> -
> -typedef struct {
> - uint mii_data;
> - void (*funct)(uint mii_reg, struct net_device *dev);
> -} phy_cmd_t;
> -
> -typedef struct {
> - uint id;
> - char *name;
> -
> - const phy_cmd_t *config;
> - const phy_cmd_t *startup;
> - const phy_cmd_t *ack_int;
> - const phy_cmd_t *shutdown;
> -} phy_info_t;
> -
> /* The number of Tx and Rx buffers. These are allocated from the page
> * pool. The code may assume these are power of two, so it it best
> * to keep them that size.
> @@ -189,29 +172,21 @@ struct fec_enet_private {
> uint tx_full;
> /* hold while accessing the HW like ringbuffer for tx/rx but not MAC */
> spinlock_t hw_lock;
> - /* hold while accessing the mii_list_t() elements */
> - spinlock_t mii_lock;
> -
> - uint phy_id;
> - uint phy_id_done;
> - uint phy_status;
> - uint phy_speed;
> - phy_info_t const *phy;
> - struct work_struct phy_task;
>
> - uint sequence_done;
> - uint mii_phy_task_queued;
> + struct platform_device *pdev;
>
> - uint phy_addr;
> + int opened;
>
> + /* Phylib and MDIO interface */
> + struct mii_bus *mii_bus;
> + struct phy_device *phy_dev;
> + int mii_timeout;
> + uint phy_speed;
> int index;
> - int opened;
> int link;
> - int old_link;
> int full_duplex;
> };
>
> -static void fec_enet_mii(struct net_device *dev);
> static irqreturn_t fec_enet_interrupt(int irq, void * dev_id);
> static void fec_enet_tx(struct net_device *dev);
> static void fec_enet_rx(struct net_device *dev);
> @@ -219,67 +194,20 @@ static int fec_enet_close(struct net_device *dev);
> static void fec_restart(struct net_device *dev, int duplex);
> static void fec_stop(struct net_device *dev);
>
> +/* FEC MII MMFR bits definition */
> +#define FEC_MMFR_ST (1 << 30)
> +#define FEC_MMFR_OP_READ (2 << 28)
> +#define FEC_MMFR_OP_WRITE (1 << 28)
> +#define FEC_MMFR_PA(v) ((v & 0x1f) << 23)
> +#define FEC_MMFR_RA(v) ((v & 0x1f) << 18)
> +#define FEC_MMFR_TA (2 << 16)
> +#define FEC_MMFR_DATA(v) (v & 0xffff)
>
> -/* MII processing. We keep this as simple as possible. Requests are
> - * placed on the list (if there is room). When the request is finished
> - * by the MII, an optional function may be called.
> - */
> -typedef struct mii_list {
> - uint mii_regval;
> - void (*mii_func)(uint val, struct net_device *dev);
> - struct mii_list *mii_next;
> -} mii_list_t;
> -
> -#define NMII 20
> -static mii_list_t mii_cmds[NMII];
> -static mii_list_t *mii_free;
> -static mii_list_t *mii_head;
> -static mii_list_t *mii_tail;
> -
> -static int mii_queue(struct net_device *dev, int request,
> - void (*func)(uint, struct net_device *));
> -
> -/* Make MII read/write commands for the FEC */
> -#define mk_mii_read(REG) (0x60020000 | ((REG & 0x1f) << 18))
> -#define mk_mii_write(REG, VAL) (0x50020000 | ((REG & 0x1f) << 18) | \
> - (VAL & 0xffff))
> -#define mk_mii_end 0
> +#define FEC_MII_TIMEOUT 10000
>
> /* Transmitter timeout */
> #define TX_TIMEOUT (2 * HZ)
>
> -/* Register definitions for the PHY */
> -
> -#define MII_REG_CR 0 /* Control Register */
> -#define MII_REG_SR 1 /* Status Register */
> -#define MII_REG_PHYIR1 2 /* PHY Identification Register 1 */
> -#define MII_REG_PHYIR2 3 /* PHY Identification Register 2 */
> -#define MII_REG_ANAR 4 /* A-N Advertisement Register */
> -#define MII_REG_ANLPAR 5 /* A-N Link Partner Ability Register */
> -#define MII_REG_ANER 6 /* A-N Expansion Register */
> -#define MII_REG_ANNPTR 7 /* A-N Next Page Transmit Register */
> -#define MII_REG_ANLPRNPR 8 /* A-N Link Partner Received Next Page Reg. */
> -
> -/* values for phy_status */
> -
> -#define PHY_CONF_ANE 0x0001 /* 1 auto-negotiation enabled */
> -#define PHY_CONF_LOOP 0x0002 /* 1 loopback mode enabled */
> -#define PHY_CONF_SPMASK 0x00f0 /* mask for speed */
> -#define PHY_CONF_10HDX 0x0010 /* 10 Mbit half duplex supported */
> -#define PHY_CONF_10FDX 0x0020 /* 10 Mbit full duplex supported */
> -#define PHY_CONF_100HDX 0x0040 /* 100 Mbit half duplex supported */
> -#define PHY_CONF_100FDX 0x0080 /* 100 Mbit full duplex supported */
> -
> -#define PHY_STAT_LINK 0x0100 /* 1 up - 0 down */
> -#define PHY_STAT_FAULT 0x0200 /* 1 remote fault */
> -#define PHY_STAT_ANC 0x0400 /* 1 auto-negotiation complete */
> -#define PHY_STAT_SPMASK 0xf000 /* mask for speed */
> -#define PHY_STAT_10HDX 0x1000 /* 10 Mbit half duplex selected */
> -#define PHY_STAT_10FDX 0x2000 /* 10 Mbit full duplex selected */
> -#define PHY_STAT_100HDX 0x4000 /* 100 Mbit half duplex selected */
> -#define PHY_STAT_100FDX 0x8000 /* 100 Mbit full duplex selected */
> -
> -
> static int
> fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
> {
> @@ -406,12 +334,6 @@ fec_enet_interrupt(int irq, void * dev_id)
> ret = IRQ_HANDLED;
> fec_enet_tx(dev);
> }
> -
> - if (int_events & FEC_ENET_MII) {
> - ret = IRQ_HANDLED;
> - fec_enet_mii(dev);
> - }
> -
> } while (int_events);
>
> return ret;
> @@ -607,827 +529,311 @@ rx_processing_done:
> spin_unlock(&fep->hw_lock);
> }
>
> -/* called from interrupt context */
> -static void
> -fec_enet_mii(struct net_device *dev)
> -{
> - struct fec_enet_private *fep;
> - mii_list_t *mip;
> -
> - fep = netdev_priv(dev);
> - spin_lock(&fep->mii_lock);
> -
> - if ((mip = mii_head) == NULL) {
> - printk("MII and no head!\n");
> - goto unlock;
> - }
> -
> - if (mip->mii_func != NULL)
> - (*(mip->mii_func))(readl(fep->hwp + FEC_MII_DATA), dev);
> -
> - mii_head = mip->mii_next;
> - mip->mii_next = mii_free;
> - mii_free = mip;
> -
> - if ((mip = mii_head) != NULL)
> - writel(mip->mii_regval, fep->hwp + FEC_MII_DATA);
> -
> -unlock:
> - spin_unlock(&fep->mii_lock);
> -}
> -
> -static int
> -mii_queue_unlocked(struct net_device *dev, int regval,
> - void (*func)(uint, struct net_device *))
> +/* ------------------------------------------------------------------------- */
> +#ifdef CONFIG_M5272
> +static void __inline__ fec_get_mac(struct net_device *dev)
> {
> - struct fec_enet_private *fep;
> - mii_list_t *mip;
> - int retval;
> -
> - /* Add PHY address to register command */
> - fep = netdev_priv(dev);
> + struct fec_enet_private *fep = netdev_priv(dev);
> + unsigned char *iap, tmpaddr[ETH_ALEN];
>
> - regval |= fep->phy_addr << 23;
> - retval = 0;
> -
> - if ((mip = mii_free) != NULL) {
> - mii_free = mip->mii_next;
> - mip->mii_regval = regval;
> - mip->mii_func = func;
> - mip->mii_next = NULL;
> - if (mii_head) {
> - mii_tail->mii_next = mip;
> - mii_tail = mip;
> - } else {
> - mii_head = mii_tail = mip;
> - writel(regval, fep->hwp + FEC_MII_DATA);
> - }
> + if (FEC_FLASHMAC) {
> + /*
> + * Get MAC address from FLASH.
> + * If it is all 1's or 0's, use the default.
> + */
> + iap = (unsigned char *)FEC_FLASHMAC;
> + if ((iap[0] == 0) && (iap[1] == 0) && (iap[2] == 0) &&
> + (iap[3] == 0) && (iap[4] == 0) && (iap[5] == 0))
> + iap = fec_mac_default;
> + if ((iap[0] == 0xff) && (iap[1] == 0xff) && (iap[2] == 0xff) &&
> + (iap[3] == 0xff) && (iap[4] == 0xff) && (iap[5] == 0xff))
> + iap = fec_mac_default;
> } else {
> - retval = 1;
> + *((unsigned long *) &tmpaddr[0]) = readl(fep->hwp + FEC_ADDR_LOW);
> + *((unsigned short *) &tmpaddr[4]) = (readl(fep->hwp + FEC_ADDR_HIGH) >> 16);
> + iap = &tmpaddr[0];
> }
>
> - return retval;
> -}
> -
> -static int
> -mii_queue(struct net_device *dev, int regval,
> - void (*func)(uint, struct net_device *))
> -{
> - struct fec_enet_private *fep;
> - unsigned long flags;
> - int retval;
> - fep = netdev_priv(dev);
> - spin_lock_irqsave(&fep->mii_lock, flags);
> - retval = mii_queue_unlocked(dev, regval, func);
> - spin_unlock_irqrestore(&fep->mii_lock, flags);
> - return retval;
> -}
> -
> -static void mii_do_cmd(struct net_device *dev, const phy_cmd_t *c)
> -{
> - if(!c)
> - return;
> + memcpy(dev->dev_addr, iap, ETH_ALEN);
>
> - for (; c->mii_data != mk_mii_end; c++)
> - mii_queue(dev, c->mii_data, c->funct);
> + /* Adjust MAC if using default MAC address */
> + if (iap == fec_mac_default)
> + dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index;
> }
> +#endif
>
> -static void mii_parse_sr(uint mii_reg, struct net_device *dev)
> -{
> - struct fec_enet_private *fep = netdev_priv(dev);
> - volatile uint *s = &(fep->phy_status);
> - uint status;
> -
> - status = *s & ~(PHY_STAT_LINK | PHY_STAT_FAULT | PHY_STAT_ANC);
> -
> - if (mii_reg & 0x0004)
> - status |= PHY_STAT_LINK;
> - if (mii_reg & 0x0010)
> - status |= PHY_STAT_FAULT;
> - if (mii_reg & 0x0020)
> - status |= PHY_STAT_ANC;
> - *s = status;
> -}
> +/* ------------------------------------------------------------------------- */
>
> -static void mii_parse_cr(uint mii_reg, struct net_device *dev)
> +/*
> + * Phy section
> + */
> +static void fec_enet_adjust_link(struct net_device *dev)
> {
> struct fec_enet_private *fep = netdev_priv(dev);
> - volatile uint *s = &(fep->phy_status);
> - uint status;
> -
> - status = *s & ~(PHY_CONF_ANE | PHY_CONF_LOOP);
> -
> - if (mii_reg & 0x1000)
> - status |= PHY_CONF_ANE;
> - if (mii_reg & 0x4000)
> - status |= PHY_CONF_LOOP;
> - *s = status;
> -}
> + struct phy_device *phy_dev = fep->phy_dev;
> + unsigned long flags;
>
> -static void mii_parse_anar(uint mii_reg, struct net_device *dev)
> -{
> - struct fec_enet_private *fep = netdev_priv(dev);
> - volatile uint *s = &(fep->phy_status);
> - uint status;
> -
> - status = *s & ~(PHY_CONF_SPMASK);
> -
> - if (mii_reg & 0x0020)
> - status |= PHY_CONF_10HDX;
> - if (mii_reg & 0x0040)
> - status |= PHY_CONF_10FDX;
> - if (mii_reg & 0x0080)
> - status |= PHY_CONF_100HDX;
> - if (mii_reg & 0x00100)
> - status |= PHY_CONF_100FDX;
> - *s = status;
> -}
> + int status_change = 0;
>
> -/* ------------------------------------------------------------------------- */
> -/* The Level one LXT970 is used by many boards */
> + spin_lock_irqsave(&fep->hw_lock, flags);
>
> -#define MII_LXT970_MIRROR 16 /* Mirror register */
> -#define MII_LXT970_IER 17 /* Interrupt Enable Register */
> -#define MII_LXT970_ISR 18 /* Interrupt Status Register */
> -#define MII_LXT970_CONFIG 19 /* Configuration Register */
> -#define MII_LXT970_CSR 20 /* Chip Status Register */
> + /* Prevent a state halted on mii error */
> + if (fep->mii_timeout && phy_dev->state == PHY_HALTED) {
> + phy_dev->state = PHY_RESUMING;
> + goto spin_unlock;
> + }
>
> -static void mii_parse_lxt970_csr(uint mii_reg, struct net_device *dev)
> -{
> - struct fec_enet_private *fep = netdev_priv(dev);
> - volatile uint *s = &(fep->phy_status);
> - uint status;
> + /* Duplex link change */
> + if (phy_dev->link) {
> + if (fep->full_duplex != phy_dev->duplex) {
> + fec_restart(dev, phy_dev->duplex);
> + status_change = 1;
> + }
> + }
>
> - status = *s & ~(PHY_STAT_SPMASK);
> - if (mii_reg & 0x0800) {
> - if (mii_reg & 0x1000)
> - status |= PHY_STAT_100FDX;
> + /* Link on or off change */
> + if (phy_dev->link != fep->link) {
> + fep->link = phy_dev->link;
> + if (phy_dev->link)
> + fec_restart(dev, phy_dev->duplex);
> else
> - status |= PHY_STAT_100HDX;
> - } else {
> - if (mii_reg & 0x1000)
> - status |= PHY_STAT_10FDX;
> - else
> - status |= PHY_STAT_10HDX;
> + fec_stop(dev);
> + status_change = 1;
> }
> - *s = status;
> -}
> -
> -static phy_cmd_t const phy_cmd_lxt970_config[] = {
> - { mk_mii_read(MII_REG_CR), mii_parse_cr },
> - { mk_mii_read(MII_REG_ANAR), mii_parse_anar },
> - { mk_mii_end, }
> - };
> -static phy_cmd_t const phy_cmd_lxt970_startup[] = { /* enable interrupts */
> - { mk_mii_write(MII_LXT970_IER, 0x0002), NULL },
> - { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
> - { mk_mii_end, }
> - };
> -static phy_cmd_t const phy_cmd_lxt970_ack_int[] = {
> - /* read SR and ISR to acknowledge */
> - { mk_mii_read(MII_REG_SR), mii_parse_sr },
> - { mk_mii_read(MII_LXT970_ISR), NULL },
> -
> - /* find out the current status */
> - { mk_mii_read(MII_LXT970_CSR), mii_parse_lxt970_csr },
> - { mk_mii_end, }
> - };
> -static phy_cmd_t const phy_cmd_lxt970_shutdown[] = { /* disable interrupts */
> - { mk_mii_write(MII_LXT970_IER, 0x0000), NULL },
> - { mk_mii_end, }
> - };
> -static phy_info_t const phy_info_lxt970 = {
> - .id = 0x07810000,
> - .name = "LXT970",
> - .config = phy_cmd_lxt970_config,
> - .startup = phy_cmd_lxt970_startup,
> - .ack_int = phy_cmd_lxt970_ack_int,
> - .shutdown = phy_cmd_lxt970_shutdown
> -};
>
> -/* ------------------------------------------------------------------------- */
> -/* The Level one LXT971 is used on some of my custom boards */
> -
> -/* register definitions for the 971 */
> +spin_unlock:
> + spin_unlock_irqrestore(&fep->hw_lock, flags);
>
> -#define MII_LXT971_PCR 16 /* Port Control Register */
> -#define MII_LXT971_SR2 17 /* Status Register 2 */
> -#define MII_LXT971_IER 18 /* Interrupt Enable Register */
> -#define MII_LXT971_ISR 19 /* Interrupt Status Register */
> -#define MII_LXT971_LCR 20 /* LED Control Register */
> -#define MII_LXT971_TCR 30 /* Transmit Control Register */
> + if (status_change)
> + phy_print_status(phy_dev);
> +}
>
> /*
> - * I had some nice ideas of running the MDIO faster...
> - * The 971 should support 8MHz and I tried it, but things acted really
> - * weird, so 2.5 MHz ought to be enough for anyone...
> + * NOTE: a MII transaction is during around 25 us, so polling it...
> */
> -
> -static void mii_parse_lxt971_sr2(uint mii_reg, struct net_device *dev)
> +static int fec_enet_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
> {
> - struct fec_enet_private *fep = netdev_priv(dev);
> - volatile uint *s = &(fep->phy_status);
> - uint status;
> + struct fec_enet_private *fep = bus->priv;
> + int timeout = FEC_MII_TIMEOUT;
>
> - status = *s & ~(PHY_STAT_SPMASK | PHY_STAT_LINK | PHY_STAT_ANC);
> + fep->mii_timeout = 0;
>
> - if (mii_reg & 0x0400) {
> - fep->link = 1;
> - status |= PHY_STAT_LINK;
> - } else {
> - fep->link = 0;
> - }
> - if (mii_reg & 0x0080)
> - status |= PHY_STAT_ANC;
> - if (mii_reg & 0x4000) {
> - if (mii_reg & 0x0200)
> - status |= PHY_STAT_100FDX;
> - else
> - status |= PHY_STAT_100HDX;
> - } else {
> - if (mii_reg & 0x0200)
> - status |= PHY_STAT_10FDX;
> - else
> - status |= PHY_STAT_10HDX;
> + /* clear MII end of transfer bit*/
> + writel(FEC_ENET_MII, fep->hwp + FEC_IEVENT);
> +
> + /* start a read op */
> + writel(FEC_MMFR_ST | FEC_MMFR_OP_READ |
> + FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(regnum) |
> + FEC_MMFR_TA, fep->hwp + FEC_MII_DATA);
> +
> + /* wait for end of transfer */
> + while (!(readl(fep->hwp + FEC_IEVENT) & FEC_ENET_MII)) {
> + cpu_relax();
> + if (timeout-- < 0) {
> + fep->mii_timeout = 1;
> + printk(KERN_ERR "FEC: MDIO read timeout\n");
> + return -ETIMEDOUT;
> + }
> }
> - if (mii_reg & 0x0008)
> - status |= PHY_STAT_FAULT;
>
> - *s = status;
> + /* return value */
> + return FEC_MMFR_DATA(readl(fep->hwp + FEC_MII_DATA));
> }
>
> -static phy_cmd_t const phy_cmd_lxt971_config[] = {
> - /* limit to 10MBit because my prototype board
> - * doesn't work with 100. */
> - { mk_mii_read(MII_REG_CR), mii_parse_cr },
> - { mk_mii_read(MII_REG_ANAR), mii_parse_anar },
> - { mk_mii_read(MII_LXT971_SR2), mii_parse_lxt971_sr2 },
> - { mk_mii_end, }
> - };
> -static phy_cmd_t const phy_cmd_lxt971_startup[] = { /* enable interrupts */
> - { mk_mii_write(MII_LXT971_IER, 0x00f2), NULL },
> - { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
> - { mk_mii_write(MII_LXT971_LCR, 0xd422), NULL }, /* LED config */
> - /* Somehow does the 971 tell me that the link is down
> - * the first read after power-up.
> - * read here to get a valid value in ack_int */
> - { mk_mii_read(MII_REG_SR), mii_parse_sr },
> - { mk_mii_end, }
> - };
> -static phy_cmd_t const phy_cmd_lxt971_ack_int[] = {
> - /* acknowledge the int before reading status ! */
> - { mk_mii_read(MII_LXT971_ISR), NULL },
> - /* find out the current status */
> - { mk_mii_read(MII_REG_SR), mii_parse_sr },
> - { mk_mii_read(MII_LXT971_SR2), mii_parse_lxt971_sr2 },
> - { mk_mii_end, }
> - };
> -static phy_cmd_t const phy_cmd_lxt971_shutdown[] = { /* disable interrupts */
> - { mk_mii_write(MII_LXT971_IER, 0x0000), NULL },
> - { mk_mii_end, }
> - };
> -static phy_info_t const phy_info_lxt971 = {
> - .id = 0x0001378e,
> - .name = "LXT971",
> - .config = phy_cmd_lxt971_config,
> - .startup = phy_cmd_lxt971_startup,
> - .ack_int = phy_cmd_lxt971_ack_int,
> - .shutdown = phy_cmd_lxt971_shutdown
> -};
> -
> -/* ------------------------------------------------------------------------- */
> -/* The Quality Semiconductor QS6612 is used on the RPX CLLF */
> -
> -/* register definitions */
> -
> -#define MII_QS6612_MCR 17 /* Mode Control Register */
> -#define MII_QS6612_FTR 27 /* Factory Test Register */
> -#define MII_QS6612_MCO 28 /* Misc. Control Register */
> -#define MII_QS6612_ISR 29 /* Interrupt Source Register */
> -#define MII_QS6612_IMR 30 /* Interrupt Mask Register */
> -#define MII_QS6612_PCR 31 /* 100BaseTx PHY Control Reg. */
> -
> -static void mii_parse_qs6612_pcr(uint mii_reg, struct net_device *dev)
> +static int fec_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
> + u16 value)
> {
> - struct fec_enet_private *fep = netdev_priv(dev);
> - volatile uint *s = &(fep->phy_status);
> - uint status;
> + struct fec_enet_private *fep = bus->priv;
> + int timeout = FEC_MII_TIMEOUT;
>
> - status = *s & ~(PHY_STAT_SPMASK);
> + fep->mii_timeout = 0;
>
> - switch((mii_reg >> 2) & 7) {
> - case 1: status |= PHY_STAT_10HDX; break;
> - case 2: status |= PHY_STAT_100HDX; break;
> - case 5: status |= PHY_STAT_10FDX; break;
> - case 6: status |= PHY_STAT_100FDX; break;
> -}
> -
> - *s = status;
> -}
> -
> -static phy_cmd_t const phy_cmd_qs6612_config[] = {
> - /* The PHY powers up isolated on the RPX,
> - * so send a command to allow operation.
> - */
> - { mk_mii_write(MII_QS6612_PCR, 0x0dc0), NULL },
> -
> - /* parse cr and anar to get some info */
> - { mk_mii_read(MII_REG_CR), mii_parse_cr },
> - { mk_mii_read(MII_REG_ANAR), mii_parse_anar },
> - { mk_mii_end, }
> - };
> -static phy_cmd_t const phy_cmd_qs6612_startup[] = { /* enable interrupts */
> - { mk_mii_write(MII_QS6612_IMR, 0x003a), NULL },
> - { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
> - { mk_mii_end, }
> - };
> -static phy_cmd_t const phy_cmd_qs6612_ack_int[] = {
> - /* we need to read ISR, SR and ANER to acknowledge */
> - { mk_mii_read(MII_QS6612_ISR), NULL },
> - { mk_mii_read(MII_REG_SR), mii_parse_sr },
> - { mk_mii_read(MII_REG_ANER), NULL },
> -
> - /* read pcr to get info */
> - { mk_mii_read(MII_QS6612_PCR), mii_parse_qs6612_pcr },
> - { mk_mii_end, }
> - };
> -static phy_cmd_t const phy_cmd_qs6612_shutdown[] = { /* disable interrupts */
> - { mk_mii_write(MII_QS6612_IMR, 0x0000), NULL },
> - { mk_mii_end, }
> - };
> -static phy_info_t const phy_info_qs6612 = {
> - .id = 0x00181440,
> - .name = "QS6612",
> - .config = phy_cmd_qs6612_config,
> - .startup = phy_cmd_qs6612_startup,
> - .ack_int = phy_cmd_qs6612_ack_int,
> - .shutdown = phy_cmd_qs6612_shutdown
> -};
> -
> -/* ------------------------------------------------------------------------- */
> -/* AMD AM79C874 phy */
> + /* clear MII end of transfer bit*/
> + writel(FEC_ENET_MII, fep->hwp + FEC_IEVENT);
>
> -/* register definitions for the 874 */
> + /* start a read op */
> + writel(FEC_MMFR_ST | FEC_MMFR_OP_READ |
> + FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(regnum) |
> + FEC_MMFR_TA | FEC_MMFR_DATA(value),
> + fep->hwp + FEC_MII_DATA);
> +
> + /* wait for end of transfer */
> + while (!(readl(fep->hwp + FEC_IEVENT) & FEC_ENET_MII)) {
> + cpu_relax();
> + if (timeout-- < 0) {
> + fep->mii_timeout = 1;
> + printk(KERN_ERR "FEC: MDIO write timeout\n");
> + return -ETIMEDOUT;
> + }
> + }
>
> -#define MII_AM79C874_MFR 16 /* Miscellaneous Feature Register */
> -#define MII_AM79C874_ICSR 17 /* Interrupt/Status Register */
> -#define MII_AM79C874_DR 18 /* Diagnostic Register */
> -#define MII_AM79C874_PMLR 19 /* Power and Loopback Register */
> -#define MII_AM79C874_MCR 21 /* ModeControl Register */
> -#define MII_AM79C874_DC 23 /* Disconnect Counter */
> -#define MII_AM79C874_REC 24 /* Recieve Error Counter */
> + return 0;
> +}
>
> -static void mii_parse_am79c874_dr(uint mii_reg, struct net_device *dev)
> +static int fec_enet_mdio_reset(struct mii_bus *bus)
> {
> - struct fec_enet_private *fep = netdev_priv(dev);
> - volatile uint *s = &(fep->phy_status);
> - uint status;
> -
> - status = *s & ~(PHY_STAT_SPMASK | PHY_STAT_ANC);
> -
> - if (mii_reg & 0x0080)
> - status |= PHY_STAT_ANC;
> - if (mii_reg & 0x0400)
> - status |= ((mii_reg & 0x0800) ? PHY_STAT_100FDX : PHY_STAT_100HDX);
> - else
> - status |= ((mii_reg & 0x0800) ? PHY_STAT_10FDX : PHY_STAT_10HDX);
> -
> - *s = status;
> + return 0;
> }
>
> -static phy_cmd_t const phy_cmd_am79c874_config[] = {
> - { mk_mii_read(MII_REG_CR), mii_parse_cr },
> - { mk_mii_read(MII_REG_ANAR), mii_parse_anar },
> - { mk_mii_read(MII_AM79C874_DR), mii_parse_am79c874_dr },
> - { mk_mii_end, }
> - };
> -static phy_cmd_t const phy_cmd_am79c874_startup[] = { /* enable interrupts */
> - { mk_mii_write(MII_AM79C874_ICSR, 0xff00), NULL },
> - { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
> - { mk_mii_read(MII_REG_SR), mii_parse_sr },
> - { mk_mii_end, }
> - };
> -static phy_cmd_t const phy_cmd_am79c874_ack_int[] = {
> - /* find out the current status */
> - { mk_mii_read(MII_REG_SR), mii_parse_sr },
> - { mk_mii_read(MII_AM79C874_DR), mii_parse_am79c874_dr },
> - /* we only need to read ISR to acknowledge */
> - { mk_mii_read(MII_AM79C874_ICSR), NULL },
> - { mk_mii_end, }
> - };
> -static phy_cmd_t const phy_cmd_am79c874_shutdown[] = { /* disable interrupts */
> - { mk_mii_write(MII_AM79C874_ICSR, 0x0000), NULL },
> - { mk_mii_end, }
> - };
> -static phy_info_t const phy_info_am79c874 = {
> - .id = 0x00022561,
> - .name = "AM79C874",
> - .config = phy_cmd_am79c874_config,
> - .startup = phy_cmd_am79c874_startup,
> - .ack_int = phy_cmd_am79c874_ack_int,
> - .shutdown = phy_cmd_am79c874_shutdown
> -};
> -
> -
> -/* ------------------------------------------------------------------------- */
> -/* Kendin KS8721BL phy */
> -
> -/* register definitions for the 8721 */
> -
> -#define MII_KS8721BL_RXERCR 21
> -#define MII_KS8721BL_ICSR 27
> -#define MII_KS8721BL_PHYCR 31
> -
> -static phy_cmd_t const phy_cmd_ks8721bl_config[] = {
> - { mk_mii_read(MII_REG_CR), mii_parse_cr },
> - { mk_mii_read(MII_REG_ANAR), mii_parse_anar },
> - { mk_mii_end, }
> - };
> -static phy_cmd_t const phy_cmd_ks8721bl_startup[] = { /* enable interrupts */
> - { mk_mii_write(MII_KS8721BL_ICSR, 0xff00), NULL },
> - { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
> - { mk_mii_read(MII_REG_SR), mii_parse_sr },
> - { mk_mii_end, }
> - };
> -static phy_cmd_t const phy_cmd_ks8721bl_ack_int[] = {
> - /* find out the current status */
> - { mk_mii_read(MII_REG_SR), mii_parse_sr },
> - /* we only need to read ISR to acknowledge */
> - { mk_mii_read(MII_KS8721BL_ICSR), NULL },
> - { mk_mii_end, }
> - };
> -static phy_cmd_t const phy_cmd_ks8721bl_shutdown[] = { /* disable interrupts */
> - { mk_mii_write(MII_KS8721BL_ICSR, 0x0000), NULL },
> - { mk_mii_end, }
> - };
> -static phy_info_t const phy_info_ks8721bl = {
> - .id = 0x00022161,
> - .name = "KS8721BL",
> - .config = phy_cmd_ks8721bl_config,
> - .startup = phy_cmd_ks8721bl_startup,
> - .ack_int = phy_cmd_ks8721bl_ack_int,
> - .shutdown = phy_cmd_ks8721bl_shutdown
> -};
> -
> -/* ------------------------------------------------------------------------- */
> -/* register definitions for the DP83848 */
> -
> -#define MII_DP8384X_PHYSTST 16 /* PHY Status Register */
> -
> -static void mii_parse_dp8384x_sr2(uint mii_reg, struct net_device *dev)
> +static int fec_enet_mii_probe(struct net_device *dev)
> {
> struct fec_enet_private *fep = netdev_priv(dev);
> - volatile uint *s = &(fep->phy_status);
> -
> - *s &= ~(PHY_STAT_SPMASK | PHY_STAT_LINK | PHY_STAT_ANC);
> -
> - /* Link up */
> - if (mii_reg & 0x0001) {
> - fep->link = 1;
> - *s |= PHY_STAT_LINK;
> - } else
> - fep->link = 0;
> - /* Status of link */
> - if (mii_reg & 0x0010) /* Autonegotioation complete */
> - *s |= PHY_STAT_ANC;
> - if (mii_reg & 0x0002) { /* 10MBps? */
> - if (mii_reg & 0x0004) /* Full Duplex? */
> - *s |= PHY_STAT_10FDX;
> - else
> - *s |= PHY_STAT_10HDX;
> - } else { /* 100 Mbps? */
> - if (mii_reg & 0x0004) /* Full Duplex? */
> - *s |= PHY_STAT_100FDX;
> - else
> - *s |= PHY_STAT_100HDX;
> - }
> - if (mii_reg & 0x0008)
> - *s |= PHY_STAT_FAULT;
> -}
> -
> -static phy_info_t phy_info_dp83848= {
> - 0x020005c9,
> - "DP83848",
> + struct phy_device *phy_dev = NULL;
> + int phy_addr;
>
> - (const phy_cmd_t []) { /* config */
> - { mk_mii_read(MII_REG_CR), mii_parse_cr },
> - { mk_mii_read(MII_REG_ANAR), mii_parse_anar },
> - { mk_mii_read(MII_DP8384X_PHYSTST), mii_parse_dp8384x_sr2 },
> - { mk_mii_end, }
> - },
> - (const phy_cmd_t []) { /* startup - enable interrupts */
> - { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
> - { mk_mii_read(MII_REG_SR), mii_parse_sr },
> - { mk_mii_end, }
> - },
> - (const phy_cmd_t []) { /* ack_int - never happens, no interrupt */
> - { mk_mii_end, }
> - },
> - (const phy_cmd_t []) { /* shutdown */
> - { mk_mii_end, }
> - },
> -};
> + /* find the first phy */
> + for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
> + if (fep->mii_bus->phy_map[phy_addr]) {
> + phy_dev = fep->mii_bus->phy_map[phy_addr];
> + break;
> + }
> + }
>
> -static phy_info_t phy_info_lan8700 = {
> - 0x0007C0C,
> - "LAN8700",
> - (const phy_cmd_t []) { /* config */
> - { mk_mii_read(MII_REG_CR), mii_parse_cr },
> - { mk_mii_read(MII_REG_ANAR), mii_parse_anar },
> - { mk_mii_end, }
> - },
> - (const phy_cmd_t []) { /* startup */
> - { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
> - { mk_mii_read(MII_REG_SR), mii_parse_sr },
> - { mk_mii_end, }
> - },
> - (const phy_cmd_t []) { /* act_int */
> - { mk_mii_end, }
> - },
> - (const phy_cmd_t []) { /* shutdown */
> - { mk_mii_end, }
> - },
> -};
> -/* ------------------------------------------------------------------------- */
> + if (!phy_dev) {
> + printk(KERN_ERR "%s: no PHY found\n", dev->name);
> + return -ENODEV;
> + }
>
> -static phy_info_t const * const phy_info[] = {
> - &phy_info_lxt970,
> - &phy_info_lxt971,
> - &phy_info_qs6612,
> - &phy_info_am79c874,
> - &phy_info_ks8721bl,
> - &phy_info_dp83848,
> - &phy_info_lan8700,
> - NULL
> -};
> + /* attach the mac to the phy */
> + phy_dev = phy_connect(dev, dev_name(&phy_dev->dev),
> + &fec_enet_adjust_link, 0,
> + PHY_INTERFACE_MODE_MII);
> + if (IS_ERR(phy_dev)) {
> + printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
> + return PTR_ERR(phy_dev);
> + }
>
> -/* ------------------------------------------------------------------------- */
> -#ifdef HAVE_mii_link_interrupt
> -static irqreturn_t
> -mii_link_interrupt(int irq, void * dev_id);
> + /* mask with MAC supported features */
> + phy_dev->supported &= PHY_BASIC_FEATURES;
> + phy_dev->advertising = phy_dev->supported;
>
> -/*
> - * This is specific to the MII interrupt setup of the M5272EVB.
> - */
> -static void __inline__ fec_request_mii_intr(struct net_device *dev)
> -{
> - if (request_irq(66, mii_link_interrupt, IRQF_DISABLED, "fec(MII)", dev) != 0)
> - printk("FEC: Could not allocate fec(MII) IRQ(66)!\n");
> -}
> + fep->phy_dev = phy_dev;
> + fep->link = 0;
> + fep->full_duplex = 0;
>
> -static void __inline__ fec_disable_phy_intr(struct net_device *dev)
> -{
> - free_irq(66, dev);
> + return 0;
> }
> -#endif
>
> -#ifdef CONFIG_M5272
> -static void __inline__ fec_get_mac(struct net_device *dev)
> +static int fec_enet_mii_init(struct platform_device *pdev)
> {
> + struct net_device *dev = platform_get_drvdata(pdev);
> struct fec_enet_private *fep = netdev_priv(dev);
> - unsigned char *iap, tmpaddr[ETH_ALEN];
> + int err = -ENXIO, i;
>
> - if (FEC_FLASHMAC) {
> - /*
> - * Get MAC address from FLASH.
> - * If it is all 1's or 0's, use the default.
> - */
> - iap = (unsigned char *)FEC_FLASHMAC;
> - if ((iap[0] == 0) && (iap[1] == 0) && (iap[2] == 0) &&
> - (iap[3] == 0) && (iap[4] == 0) && (iap[5] == 0))
> - iap = fec_mac_default;
> - if ((iap[0] == 0xff) && (iap[1] == 0xff) && (iap[2] == 0xff) &&
> - (iap[3] == 0xff) && (iap[4] == 0xff) && (iap[5] == 0xff))
> - iap = fec_mac_default;
> - } else {
> - *((unsigned long *) &tmpaddr[0]) = readl(fep->hwp + FEC_ADDR_LOW);
> - *((unsigned short *) &tmpaddr[4]) = (readl(fep->hwp + FEC_ADDR_HIGH) >> 16);
> - iap = &tmpaddr[0];
> - }
> -
> - memcpy(dev->dev_addr, iap, ETH_ALEN);
> -
> - /* Adjust MAC if using default MAC address */
> - if (iap == fec_mac_default)
> - dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index;
> -}
> -#endif
> + fep->mii_timeout = 0;
>
> -/* ------------------------------------------------------------------------- */
> -
> -static void mii_display_status(struct net_device *dev)
> -{
> - struct fec_enet_private *fep = netdev_priv(dev);
> - volatile uint *s = &(fep->phy_status);
> + /*
> + * Set MII speed to 2.5 MHz (= clk_get_rate() / 2 * phy_speed)
> + */
> + fep->phy_speed = DIV_ROUND_UP(clk_get_rate(fep->clk), 5000000) << 1;
> + writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
>
> - if (!fep->link && !fep->old_link) {
> - /* Link is still down - don't print anything */
> - return;
> + fep->mii_bus = mdiobus_alloc();
> + if (fep->mii_bus == NULL) {
> + err = -ENOMEM;
> + goto err_out;
> }
>
> - printk("%s: status: ", dev->name);
> -
> - if (!fep->link) {
> - printk("link down");
> - } else {
> - printk("link up");
> -
> - switch(*s & PHY_STAT_SPMASK) {
> - case PHY_STAT_100FDX: printk(", 100MBit Full Duplex"); break;
> - case PHY_STAT_100HDX: printk(", 100MBit Half Duplex"); break;
> - case PHY_STAT_10FDX: printk(", 10MBit Full Duplex"); break;
> - case PHY_STAT_10HDX: printk(", 10MBit Half Duplex"); break;
> - default:
> - printk(", Unknown speed/duplex");
> - }
> -
> - if (*s & PHY_STAT_ANC)
> - printk(", auto-negotiation complete");
> + fep->mii_bus->name = "fec_enet_mii_bus";
> + fep->mii_bus->read = fec_enet_mdio_read;
> + fep->mii_bus->write = fec_enet_mdio_write;
> + fep->mii_bus->reset = fec_enet_mdio_reset;
> + snprintf(fep->mii_bus->id, MII_BUS_ID_SIZE, "%x", pdev->id);
> + fep->mii_bus->priv = fep;
> + fep->mii_bus->parent = &pdev->dev;
> +
> + fep->mii_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
> + if (!fep->mii_bus->irq) {
> + err = -ENOMEM;
> + goto err_out_free_mdiobus;
> }
>
> - if (*s & PHY_STAT_FAULT)
> - printk(", remote fault");
> -
> - printk(".\n");
> -}
> -
> -static void mii_display_config(struct work_struct *work)
> -{
> - struct fec_enet_private *fep = container_of(work, struct fec_enet_private, phy_task);
> - struct net_device *dev = fep->netdev;
> - uint status = fep->phy_status;
> + for (i = 0; i < PHY_MAX_ADDR; i++)
> + fep->mii_bus->irq[i] = PHY_POLL;
>
> - /*
> - ** When we get here, phy_task is already removed from
> - ** the workqueue. It is thus safe to allow to reuse it.
> - */
> - fep->mii_phy_task_queued = 0;
> - printk("%s: config: auto-negotiation ", dev->name);
> -
> - if (status & PHY_CONF_ANE)
> - printk("on");
> - else
> - printk("off");
> + platform_set_drvdata(dev, fep->mii_bus);
>
> - if (status & PHY_CONF_100FDX)
> - printk(", 100FDX");
> - if (status & PHY_CONF_100HDX)
> - printk(", 100HDX");
> - if (status & PHY_CONF_10FDX)
> - printk(", 10FDX");
> - if (status & PHY_CONF_10HDX)
> - printk(", 10HDX");
> - if (!(status & PHY_CONF_SPMASK))
> - printk(", No speed/duplex selected?");
> + if (mdiobus_register(fep->mii_bus))
> + goto err_out_free_mdio_irq;
>
> - if (status & PHY_CONF_LOOP)
> - printk(", loopback enabled");
> + if (fec_enet_mii_probe(dev) != 0)
> + goto err_out_unregister_bus;
>
> - printk(".\n");
> + return 0;
>
> - fep->sequence_done = 1;
> +err_out_unregister_bus:
> + mdiobus_unregister(fep->mii_bus);
> +err_out_free_mdio_irq:
> + kfree(fep->mii_bus->irq);
> +err_out_free_mdiobus:
> + mdiobus_free(fep->mii_bus);
> +err_out:
> + return err;
> }
>
> -static void mii_relink(struct work_struct *work)
> +static void fec_enet_mii_remove(struct fec_enet_private *fep)
> {
> - struct fec_enet_private *fep = container_of(work, struct fec_enet_private, phy_task);
> - struct net_device *dev = fep->netdev;
> - int duplex;
> -
> - /*
> - ** When we get here, phy_task is already removed from
> - ** the workqueue. It is thus safe to allow to reuse it.
> - */
> - fep->mii_phy_task_queued = 0;
> - fep->link = (fep->phy_status & PHY_STAT_LINK) ? 1 : 0;
> - mii_display_status(dev);
> - fep->old_link = fep->link;
> -
> - if (fep->link) {
> - duplex = 0;
> - if (fep->phy_status
> - & (PHY_STAT_100FDX | PHY_STAT_10FDX))
> - duplex = 1;
> - fec_restart(dev, duplex);
> - } else
> - fec_stop(dev);
> + if (fep->phy_dev)
> + phy_disconnect(fep->phy_dev);
> + mdiobus_unregister(fep->mii_bus);
> + kfree(fep->mii_bus->irq);
> + mdiobus_free(fep->mii_bus);
> }
>
> -/* mii_queue_relink is called in interrupt context from mii_link_interrupt */
> -static void mii_queue_relink(uint mii_reg, struct net_device *dev)
> +static int fec_enet_get_settings(struct net_device *dev,
> + struct ethtool_cmd *cmd)
> {
> struct fec_enet_private *fep = netdev_priv(dev);
> + struct phy_device *phydev = fep->phy_dev;
>
> - /*
> - * We cannot queue phy_task twice in the workqueue. It
> - * would cause an endless loop in the workqueue.
> - * Fortunately, if the last mii_relink entry has not yet been
> - * executed now, it will do the job for the current interrupt,
> - * which is just what we want.
> - */
> - if (fep->mii_phy_task_queued)
> - return;
> + if (!phydev)
> + return -ENODEV;
>
> - fep->mii_phy_task_queued = 1;
> - INIT_WORK(&fep->phy_task, mii_relink);
> - schedule_work(&fep->phy_task);
> + return phy_ethtool_gset(phydev, cmd);
> }
>
> -/* mii_queue_config is called in interrupt context from fec_enet_mii */
> -static void mii_queue_config(uint mii_reg, struct net_device *dev)
> +static int fec_enet_set_settings(struct net_device *dev,
> + struct ethtool_cmd *cmd)
> {
> struct fec_enet_private *fep = netdev_priv(dev);
> + struct phy_device *phydev = fep->phy_dev;
>
> - if (fep->mii_phy_task_queued)
> - return;
> + if (!phydev)
> + return -ENODEV;
>
> - fep->mii_phy_task_queued = 1;
> - INIT_WORK(&fep->phy_task, mii_display_config);
> - schedule_work(&fep->phy_task);
> + return phy_ethtool_sset(phydev, cmd);
> }
>
> -phy_cmd_t const phy_cmd_relink[] = {
> - { mk_mii_read(MII_REG_CR), mii_queue_relink },
> - { mk_mii_end, }
> - };
> -phy_cmd_t const phy_cmd_config[] = {
> - { mk_mii_read(MII_REG_CR), mii_queue_config },
> - { mk_mii_end, }
> - };
> -
> -/* Read remainder of PHY ID. */
> -static void
> -mii_discover_phy3(uint mii_reg, struct net_device *dev)
> +static void fec_enet_get_drvinfo(struct net_device *dev,
> + struct ethtool_drvinfo *info)
> {
> - struct fec_enet_private *fep;
> - int i;
> -
> - fep = netdev_priv(dev);
> - fep->phy_id |= (mii_reg & 0xffff);
> - printk("fec: PHY @ 0x%x, ID 0x%08x", fep->phy_addr, fep->phy_id);
> -
> - for(i = 0; phy_info[i]; i++) {
> - if(phy_info[i]->id == (fep->phy_id >> 4))
> - break;
> - }
> -
> - if (phy_info[i])
> - printk(" -- %s\n", phy_info[i]->name);
> - else
> - printk(" -- unknown PHY!\n");
> + struct fec_enet_private *fep = netdev_priv(dev);
>
> - fep->phy = phy_info[i];
> - fep->phy_id_done = 1;
> + strcpy(info->driver, fep->pdev->dev.driver->name);
> + strcpy(info->version, "Revision: 1.0");
> + strcpy(info->bus_info, dev_name(&dev->dev));
> }
>
> -/* Scan all of the MII PHY addresses looking for someone to respond
> - * with a valid ID. This usually happens quickly.
> - */
> -static void
> -mii_discover_phy(uint mii_reg, struct net_device *dev)
> -{
> - struct fec_enet_private *fep;
> - uint phytype;
> -
> - fep = netdev_priv(dev);
> -
> - if (fep->phy_addr < 32) {
> - if ((phytype = (mii_reg & 0xffff)) != 0xffff && phytype != 0) {
> -
> - /* Got first part of ID, now get remainder */
> - fep->phy_id = phytype << 16;
> - mii_queue_unlocked(dev, mk_mii_read(MII_REG_PHYIR2),
> - mii_discover_phy3);
> - } else {
> - fep->phy_addr++;
> - mii_queue_unlocked(dev, mk_mii_read(MII_REG_PHYIR1),
> - mii_discover_phy);
> - }
> - } else {
> - printk("FEC: No PHY device found.\n");
> - /* Disable external MII interface */
> - writel(0, fep->hwp + FEC_MII_SPEED);
> - fep->phy_speed = 0;
> -#ifdef HAVE_mii_link_interrupt
> - fec_disable_phy_intr(dev);
> -#endif
> - }
> -}
> +static struct ethtool_ops fec_enet_ethtool_ops = {
> + .get_settings = fec_enet_get_settings,
> + .set_settings = fec_enet_set_settings,
> + .get_drvinfo = fec_enet_get_drvinfo,
> + .get_link = ethtool_op_get_link,
> +};
>
> -/* This interrupt occurs when the PHY detects a link change */
> -#ifdef HAVE_mii_link_interrupt
> -static irqreturn_t
> -mii_link_interrupt(int irq, void * dev_id)
> +static int fec_enet_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
> {
> - struct net_device *dev = dev_id;
> struct fec_enet_private *fep = netdev_priv(dev);
> + struct phy_device *phydev = fep->phy_dev;
> +
> + if (!netif_running(dev))
> + return -EINVAL;
>
> - mii_do_cmd(dev, fep->phy->ack_int);
> - mii_do_cmd(dev, phy_cmd_relink); /* restart and display status */
> + if (!phydev)
> + return -ENODEV;
>
> - return IRQ_HANDLED;
> + return phy_mii_ioctl(phydev, if_mii(rq), cmd);
> }
> -#endif
>
> static void fec_enet_free_buffers(struct net_device *dev)
> {
> @@ -1509,35 +915,8 @@ fec_enet_open(struct net_device *dev)
> if (ret)
> return ret;
>
> - fep->sequence_done = 0;
> - fep->link = 0;
> -
> - fec_restart(dev, 1);
> -
> - if (fep->phy) {
> - mii_do_cmd(dev, fep->phy->ack_int);
> - mii_do_cmd(dev, fep->phy->config);
> - mii_do_cmd(dev, phy_cmd_config); /* display configuration */
> -
> - /* Poll until the PHY tells us its configuration
> - * (not link state).
> - * Request is initiated by mii_do_cmd above, but answer
> - * comes by interrupt.
> - * This should take about 25 usec per register at 2.5 MHz,
> - * and we read approximately 5 registers.
> - */
> - while(!fep->sequence_done)
> - schedule();
> -
> - mii_do_cmd(dev, fep->phy->startup);
> - }
> -
> - /* Set the initial link state to true. A lot of hardware
> - * based on this device does not implement a PHY interrupt,
> - * so we are never notified of link change.
> - */
> - fep->link = 1;
> -
> + /* schedule a link state check */
> + phy_start(fep->phy_dev);
> netif_start_queue(dev);
> fep->opened = 1;
> return 0;
> @@ -1550,6 +929,7 @@ fec_enet_close(struct net_device *dev)
>
> /* Don't know what to do yet. */
> fep->opened = 0;
> + phy_stop(fep->phy_dev);
> netif_stop_queue(dev);
> fec_stop(dev);
>
> @@ -1666,6 +1046,7 @@ static const struct net_device_ops fec_netdev_ops = {
> .ndo_validate_addr = eth_validate_addr,
> .ndo_tx_timeout = fec_timeout,
> .ndo_set_mac_address = fec_set_mac_address,
> + .ndo_do_ioctl = fec_enet_ioctl,
> };
>
> /*
> @@ -1689,7 +1070,6 @@ static int fec_enet_init(struct net_device *dev, int index)
> }
>
> spin_lock_init(&fep->hw_lock);
> - spin_lock_init(&fep->mii_lock);
>
> fep->index = index;
> fep->hwp = (void __iomem *)dev->base_addr;
> @@ -1716,20 +1096,10 @@ static int fec_enet_init(struct net_device *dev, int index)
> fep->rx_bd_base = cbd_base;
> fep->tx_bd_base = cbd_base + RX_RING_SIZE;
>
> -#ifdef HAVE_mii_link_interrupt
> - fec_request_mii_intr(dev);
> -#endif
> /* The FEC Ethernet specific entries in the device structure */
> dev->watchdog_timeo = TX_TIMEOUT;
> dev->netdev_ops = &fec_netdev_ops;
> -
> - for (i=0; i<NMII-1; i++)
> - mii_cmds[i].mii_next = &mii_cmds[i+1];
> - mii_free = mii_cmds;
> -
> - /* Set MII speed to 2.5 MHz */
> - fep->phy_speed = ((((clk_get_rate(fep->clk) / 2 + 4999999)
> - / 2500000) / 2) & 0x3F) << 1;
> + dev->ethtool_ops = &fec_enet_ethtool_ops;
>
> /* Initialize the receive buffer descriptors. */
> bdp = fep->rx_bd_base;
> @@ -1760,13 +1130,6 @@ static int fec_enet_init(struct net_device *dev, int index)
>
> fec_restart(dev, 0);
>
> - /* Queue up command to detect the PHY and initialize the
> - * remainder of the interface.
> - */
> - fep->phy_id_done = 0;
> - fep->phy_addr = 0;
> - mii_queue(dev, mk_mii_read(MII_REG_PHYIR1), mii_discover_phy);
> -
> return 0;
> }
>
> @@ -1835,8 +1198,7 @@ fec_restart(struct net_device *dev, int duplex)
> writel(0, fep->hwp + FEC_R_DES_ACTIVE);
>
> /* Enable interrupts we wish to service */
> - writel(FEC_ENET_TXF | FEC_ENET_RXF | FEC_ENET_MII,
> - fep->hwp + FEC_IMASK);
> + writel(FEC_ENET_TXF | FEC_ENET_RXF, fep->hwp + FEC_IMASK);
> }
>
> static void
> @@ -1859,7 +1221,6 @@ fec_stop(struct net_device *dev)
> /* Clear outstanding MII command interrupts. */
> writel(FEC_ENET_MII, fep->hwp + FEC_IEVENT);
>
> - writel(FEC_ENET_MII, fep->hwp + FEC_IMASK);
> writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
> }
>
> @@ -1891,6 +1252,7 @@ fec_probe(struct platform_device *pdev)
> memset(fep, 0, sizeof(*fep));
>
> ndev->base_addr = (unsigned long)ioremap(r->start, resource_size(r));
> + fep->pdev = pdev;
>
> if (!ndev->base_addr) {
> ret = -ENOMEM;
> @@ -1926,13 +1288,24 @@ fec_probe(struct platform_device *pdev)
> if (ret)
> goto failed_init;
>
> + ret = fec_enet_mii_init(pdev);
> + if (ret)
> + goto failed_mii_init;
> +
> ret = register_netdev(ndev);
> if (ret)
> goto failed_register;
>
> + printk(KERN_INFO "%s: Freescale FEC PHY driver [%s] "
> + "(mii_bus:phy_addr=%s, irq=%d)\n", ndev->name,
> + fep->phy_dev->drv->name, dev_name(&fep->phy_dev->dev),
> + fep->phy_dev->irq);
> +
> return 0;
>
> failed_register:
> + fec_enet_mii_remove(fep);
> +failed_mii_init:
> failed_init:
> clk_disable(fep->clk);
> clk_put(fep->clk);
> @@ -1959,6 +1332,7 @@ fec_drv_remove(struct platform_device *pdev)
> platform_set_drvdata(pdev, NULL);
>
> fec_stop(ndev);
> + fec_enet_mii_remove(fep);
> clk_disable(fep->clk);
> clk_put(fep->clk);
> iounmap((void __iomem *)ndev->base_addr);
> --
> 1.7.0.1
>
>

--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |


\
 
 \ /
  Last update: 2010-03-31 14:29    [W:0.066 / U:0.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site