lkml.org 
[lkml]   [2010]   [Mar]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: 2.6.34-rc2 breaks via82cxxx Host Protected Area
    On Fri, Mar 26, 2010 at 08:12:26PM -0400, Jeff Garzik wrote:
    > On 03/26/2010 07:21 PM, David Fries wrote:
    >> The kernel fails to see the entire disk with 2.6.34-rc2 with VIA
    >> vt82c586b chipset. I tracked it down to commit
    >> f931a5d5785d7b7c44871bd7ad2762e29dfddf29 "via82cxxx: workaround h/w
    >> bugs" and reverting just that one solves the problem, or just
    >> commenting out just one outb write in that change.
    >>
    >> via82cxxx 0000:00:07.1: VIA vt82c586b (rev 41) IDE UDMA33
    >> via82cxxx 0000:00:07.1: IDE controller (0x1106:0x0571 rev 0x06)
    >> via82cxxx 0000:00:07.1: not 100% native mode: will probe irqs later
    >>
    >> Note the kernel panic is intentional as I'm given the test kernel an
    >> invalid root device, so that I can suspend to disk, try a kernel,
    >> resume and pick up where I left off. It does have a side benefit of
    >> dumping the size of all partitions.
    >>
    >> 2.6.34-rc2 unmodified, fails and sees 30985416 KiB for the last
    >> partition.
    >> ide-gd driver 1.18
    >> hda: max request size: 128KiB
    >> hda: 66055248 sectors (33820 MB) w/7936KiB Cache, CHS=65531/16/63
    >> hda: cache flushes supported
    >> hda: hda1 hda2 hda3
    >> hda: p3 size 236037312 exceeds device capacity, enabling native capacity
    >> hda: p3 size 236037312 exceeds device capacity, limited to end of disk
    >> ide-cd driver 5.00
    >> ...
    >> Please append a correct "root=" boot option; here are the available partitions:
    >> 0300 33027624 hda driver: ide-gd
    >> 0301 49391 hda1
    >> 0302 1992816 hda2
    >> 0303 30985416 hda3
    >> Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(22,2)
    >>
    >> 2.6.34-rc2 with patch revered, correct size 118018656
    >> ide-gd driver 1.18
    >> hda: max request size: 128KiB
    >> hda: Host Protected Area detected.
    >> current capacity is 66055248 sectors (33820 MB)
    >> native capacity is 240121728 sectors (122942 MB)
    >> hda: 66055248 sectors (33820 MB) w/7936KiB Cache, CHS=65531/16/63
    >> hda: cache flushes supported
    >> hda: hda1 hda2 hda3
    >> hda: p3 size 236037312 exceeds device capacity, enabling native capacity
    >> hda: detected capacity change from 33820286976 to 122942324736
    >> ide-cd driver 5.00
    >> 0300 120060864 hda driver: ide-gd
    >> 0301 49391 hda1
    >> 0302 1992816 hda2
    >> 0303 118018656 hda3
    >> Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(22,2)
    >>
    >> Here are two debug patches, the first adds debug prints and the second
    >> disables the problematic write, I have the output of both included.
    >>
    >>> From dac7d14ce1f227d8a084c3ec218ea1430bffdc57 Mon Sep 17 00:00:00 2001
    >> From: David Fries<david@fries.net>
    >> Date: Thu, 25 Mar 2010 19:51:31 -0500
    >> Subject: [PATCH 1/2] fails: add print messages
    >>
    >> add print messages for debugging
    >> ---
    >> drivers/ide/via82cxxx.c | 5 +++++
    >> 1 files changed, 5 insertions(+), 0 deletions(-)
    >
    > Does libata + pata_via work, if you pass ignore_hpa=1 module option to
    > libata?
    >
    > Jeff

    No, here is the output with ignore_hpa=1 on the command line. I also
    don't see any difference with it not on the command line.

    scsi0 : pata_via
    scsi1 : pata_via
    ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xe400 irq 14
    ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xe408 irq 15
    ata1.00: HPA detected: current 66055248, native 240121728
    ata1.00: ATA-7: Maxtor 6Y120P0, YAR41BW0, max UDMA/133
    ata1.00: 66055248 sectors, multi 16: LBA
    ata1.00: configured for UDMA/33
    scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y120P0 YAR4 PQ: 0 ANSI: 5
    sd 0:0:0:0: [sda] 66055248 512-byte logical blocks: (33.8 GB/31.4 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3
    sda: p3 size 236037312 exceeds device capacity, limited to end of disk
    sd 0:0:0:0: [sda] Attached SCSI disk
    ata2.01: ATAPI: PLEXTOR CD-R PX-W4012A, 1.06, max UDMA/33
    ata2.01: configured for UDMA/33
    scsi 1:0:1:0: CD-ROM PLEXTOR CD-R PX-W4012A 1.06 PQ: 0 ANSI: 5
    ...
    VFS: Cannot open root device "1602" or unknown-block(22,2)
    Please append a correct "root=" boot option; here are the available partitions:
    0800 33027624 sda driver: sd
    0801 49391 sda1
    0802 1992816 sda2
    0803 30985416 sda3
    Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(22,2)

    --
    David Fries <david@fries.net>
    http://fries.net/~david/ (PGP encryption key available)


    \
     
     \ /
      Last update: 2010-03-27 01:39    [W:0.056 / U:0.564 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site