lkml.org 
[lkml]   [2010]   [Mar]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 5/7] wireless/prism54: remove trailing space in messages
    Date
    Signed-off-by: Frans Pop <elendil@planet.nl>
    Cc: Luis R. Rodriguez <mcgrof@gmail.com>
    ---
    drivers/net/wireless/p54/txrx.c | 2 +-
    drivers/net/wireless/prism54/islpci_dev.c | 16 ++++++++--------
    drivers/net/wireless/prism54/islpci_eth.c | 8 ++++----
    drivers/net/wireless/prism54/islpci_mgt.c | 8 ++++----
    drivers/net/wireless/prism54/oid_mgt.c | 2 +-
    5 files changed, 18 insertions(+), 18 deletions(-)

    diff --git a/drivers/net/wireless/p54/txrx.c b/drivers/net/wireless/p54/txrx.c
    index 6605799..2ceff54 100644
    --- a/drivers/net/wireless/p54/txrx.c
    +++ b/drivers/net/wireless/p54/txrx.c
    @@ -38,7 +38,7 @@ static void p54_dump_tx_queue(struct p54_common *priv)
    u32 largest_hole = 0, free;

    spin_lock_irqsave(&priv->tx_queue.lock, flags);
    - printk(KERN_DEBUG "%s: / --- tx queue dump (%d entries) --- \n",
    + printk(KERN_DEBUG "%s: / --- tx queue dump (%d entries) ---\n",
    wiphy_name(priv->hw->wiphy), skb_queue_len(&priv->tx_queue));

    prev_addr = priv->rx_start;
    diff --git a/drivers/net/wireless/prism54/islpci_dev.c b/drivers/net/wireless/prism54/islpci_dev.c
    index a3ba353..7c82e43 100644
    --- a/drivers/net/wireless/prism54/islpci_dev.c
    +++ b/drivers/net/wireless/prism54/islpci_dev.c
    @@ -227,14 +227,14 @@ islpci_interrupt(int irq, void *config)

    #if VERBOSE > SHOW_ERROR_MESSAGES
    DEBUG(SHOW_FUNCTION_CALLS,
    - "IRQ: Identification register 0x%p 0x%x \n", device, reg);
    + "IRQ: Identification register 0x%p 0x%x\n", device, reg);
    #endif

    /* check for each bit in the register separately */
    if (reg & ISL38XX_INT_IDENT_UPDATE) {
    #if VERBOSE > SHOW_ERROR_MESSAGES
    /* Queue has been updated */
    - DEBUG(SHOW_TRACING, "IRQ: Update flag \n");
    + DEBUG(SHOW_TRACING, "IRQ: Update flag\n");

    DEBUG(SHOW_QUEUE_INDEXES,
    "CB drv Qs: [%i][%i][%i][%i][%i][%i]\n",
    @@ -300,7 +300,7 @@ islpci_interrupt(int irq, void *config)
    ISL38XX_CB_RX_DATA_LQ) != 0) {
    #if VERBOSE > SHOW_ERROR_MESSAGES
    DEBUG(SHOW_TRACING,
    - "Received frame in Data Low Queue \n");
    + "Received frame in Data Low Queue\n");
    #endif
    islpci_eth_receive(priv);
    }
    @@ -325,7 +325,7 @@ islpci_interrupt(int irq, void *config)
    /* Device has been initialized */
    #if VERBOSE > SHOW_ERROR_MESSAGES
    DEBUG(SHOW_TRACING,
    - "IRQ: Init flag, device initialized \n");
    + "IRQ: Init flag, device initialized\n");
    #endif
    wake_up(&priv->reset_done);
    }
    @@ -333,7 +333,7 @@ islpci_interrupt(int irq, void *config)
    if (reg & ISL38XX_INT_IDENT_SLEEP) {
    /* Device intends to move to powersave state */
    #if VERBOSE > SHOW_ERROR_MESSAGES
    - DEBUG(SHOW_TRACING, "IRQ: Sleep flag \n");
    + DEBUG(SHOW_TRACING, "IRQ: Sleep flag\n");
    #endif
    isl38xx_handle_sleep_request(priv->control_block,
    &powerstate,
    @@ -343,7 +343,7 @@ islpci_interrupt(int irq, void *config)
    if (reg & ISL38XX_INT_IDENT_WAKEUP) {
    /* Device has been woken up to active state */
    #if VERBOSE > SHOW_ERROR_MESSAGES
    - DEBUG(SHOW_TRACING, "IRQ: Wakeup flag \n");
    + DEBUG(SHOW_TRACING, "IRQ: Wakeup flag\n");
    #endif

    isl38xx_handle_wakeup(priv->control_block,
    @@ -634,7 +634,7 @@ islpci_alloc_memory(islpci_private *priv)
    ioremap(pci_resource_start(priv->pdev, 0),
    ISL38XX_PCI_MEM_SIZE))) {
    /* error in remapping the PCI device memory address range */
    - printk(KERN_ERR "PCI memory remapping failed \n");
    + printk(KERN_ERR "PCI memory remapping failed\n");
    return -1;
    }

    @@ -901,7 +901,7 @@ islpci_setup(struct pci_dev *pdev)

    if (register_netdev(ndev)) {
    DEBUG(SHOW_ERROR_MESSAGES,
    - "ERROR: register_netdev() failed \n");
    + "ERROR: register_netdev() failed\n");
    goto do_islpci_free_memory;
    }

    diff --git a/drivers/net/wireless/prism54/islpci_eth.c b/drivers/net/wireless/prism54/islpci_eth.c
    index 872b647..af9e7fb 100644
    --- a/drivers/net/wireless/prism54/islpci_eth.c
    +++ b/drivers/net/wireless/prism54/islpci_eth.c
    @@ -89,7 +89,7 @@ islpci_eth_transmit(struct sk_buff *skb, struct net_device *ndev)
    u32 curr_frag;

    #if VERBOSE > SHOW_ERROR_MESSAGES
    - DEBUG(SHOW_FUNCTION_CALLS, "islpci_eth_transmit \n");
    + DEBUG(SHOW_FUNCTION_CALLS, "islpci_eth_transmit\n");
    #endif

    /* lock the driver code */
    @@ -140,7 +140,7 @@ islpci_eth_transmit(struct sk_buff *skb, struct net_device *ndev)
    }

    #if VERBOSE > SHOW_ERROR_MESSAGES
    - DEBUG(SHOW_TRACING, "memmove %p %p %i \n", skb->data,
    + DEBUG(SHOW_TRACING, "memmove %p %p %i\n", skb->data,
    src, skb->len);
    #endif
    } else {
    @@ -319,7 +319,7 @@ islpci_eth_receive(islpci_private *priv)
    int discard = 0;

    #if VERBOSE > SHOW_ERROR_MESSAGES
    - DEBUG(SHOW_FUNCTION_CALLS, "islpci_eth_receive \n");
    + DEBUG(SHOW_FUNCTION_CALLS, "islpci_eth_receive\n");
    #endif

    /* the device has written an Ethernet frame in the data area
    @@ -431,7 +431,7 @@ islpci_eth_receive(islpci_private *priv)
    skb = dev_alloc_skb(MAX_FRAGMENT_SIZE_RX + 2);
    if (unlikely(skb == NULL)) {
    /* error allocating an sk_buff structure elements */
    - DEBUG(SHOW_ERROR_MESSAGES, "Error allocating skb \n");
    + DEBUG(SHOW_ERROR_MESSAGES, "Error allocating skb\n");
    break;
    }
    skb_reserve(skb, (4 - (long) skb->data) & 0x03);
    diff --git a/drivers/net/wireless/prism54/islpci_mgt.c b/drivers/net/wireless/prism54/islpci_mgt.c
    index 69d2f88..89b0278 100644
    --- a/drivers/net/wireless/prism54/islpci_mgt.c
    +++ b/drivers/net/wireless/prism54/islpci_mgt.c
    @@ -113,7 +113,7 @@ islpci_mgmt_rx_fill(struct net_device *ndev)
    u32 curr = le32_to_cpu(cb->driver_curr_frag[ISL38XX_CB_RX_MGMTQ]);

    #if VERBOSE > SHOW_ERROR_MESSAGES
    - DEBUG(SHOW_FUNCTION_CALLS, "islpci_mgmt_rx_fill \n");
    + DEBUG(SHOW_FUNCTION_CALLS, "islpci_mgmt_rx_fill\n");
    #endif

    while (curr - priv->index_mgmt_rx < ISL38XX_CB_MGMT_QSIZE) {
    @@ -211,7 +211,7 @@ islpci_mgt_transmit(struct net_device *ndev, int operation, unsigned long oid,
    {
    pimfor_header_t *h = buf.mem;
    DEBUG(SHOW_PIMFOR_FRAMES,
    - "PIMFOR: op %i, oid 0x%08lx, device %i, flags 0x%x length 0x%x \n",
    + "PIMFOR: op %i, oid 0x%08lx, device %i, flags 0x%x length 0x%x\n",
    h->operation, oid, h->device_id, h->flags, length);

    /* display the buffer contents for debugging */
    @@ -279,7 +279,7 @@ islpci_mgt_receive(struct net_device *ndev)
    u32 curr_frag;

    #if VERBOSE > SHOW_ERROR_MESSAGES
    - DEBUG(SHOW_FUNCTION_CALLS, "islpci_mgt_receive \n");
    + DEBUG(SHOW_FUNCTION_CALLS, "islpci_mgt_receive\n");
    #endif

    /* Only once per interrupt, determine fragment range to
    @@ -338,7 +338,7 @@ islpci_mgt_receive(struct net_device *ndev)

    #if VERBOSE > SHOW_ERROR_MESSAGES
    DEBUG(SHOW_PIMFOR_FRAMES,
    - "PIMFOR: op %i, oid 0x%08x, device %i, flags 0x%x length 0x%x \n",
    + "PIMFOR: op %i, oid 0x%08x, device %i, flags 0x%x length 0x%x\n",
    header->operation, header->oid, header->device_id,
    header->flags, header->length);

    diff --git a/drivers/net/wireless/prism54/oid_mgt.c b/drivers/net/wireless/prism54/oid_mgt.c
    index 1187e61..07df70a 100644
    --- a/drivers/net/wireless/prism54/oid_mgt.c
    +++ b/drivers/net/wireless/prism54/oid_mgt.c
    @@ -819,7 +819,7 @@ mgt_response_to_str(enum oid_num_t n, union oid_res_t *r, char *str)
    k = snprintf(str, PRIV_STR_SIZE, "nr=%u\n", list->nr);
    for (i = 0; i < list->nr; i++)
    k += snprintf(str + k, PRIV_STR_SIZE - k,
    - "bss[%u] : \nage=%u\nchannel=%u\n"
    + "bss[%u] :\nage=%u\nchannel=%u\n"
    "capinfo=0x%X\nrates=0x%X\n"
    "basic_rates=0x%X\n",
    i, list->bsslist[i].age,
    --
    1.6.6.1


    \
     
     \ /
      Last update: 2010-03-24 19:51    [W:0.039 / U:148.988 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site