lkml.org 
[lkml]   [2010]   [Mar]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: Oops while booting 2.6.34-rc0 (block pull busted)
    On Tue, Mar 02, 2010 at 09:39:07AM +0100, Jens Axboe wrote:
    > On Tue, Mar 02 2010, Jens Axboe wrote:
    > > On Tue, Mar 02 2010, Jens Axboe wrote:
    > > > On Mon, Mar 01 2010, Dmitry Torokhov wrote:
    > > > > Hi,
    > > > >
    > > > > It looks like block tree that has been pulled today into mainline is
    > > > > busted, I am getting the Opps below on boot with the following commit:
    > > > >
    > > > > commit b1bf9368407ae7e89d8a005bb40beb70a41df539
    > > > > Merge: 524df55 4671a13
    > > > > Author: Linus Torvalds <torvalds@linux-foundation.org>
    > > > > Date: Mon Mar 1 09:00:29 2010 -0800
    > > > >
    > > > > Merge branch 'for-2.6.34' of git://git.kernel.dk/linux-2.6-block
    > > > >
    > > > >
    > > > > but not with the previous one:
    > > > >
    > > > > commit 524df55725217b13d5a232fb5badb5846418ea0e
    > > > > Merge: 0f45339 6679ee1
    > > > > Author: Linus Torvalds <torvalds@linux-foundation.org>
    > > > > Date: Mon Mar 1 08:58:44 2010 -0800
    > > > >
    > > > > Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
    > > > >
    > > > > This is on plain Fedora 12 VM.
    > > > >
    > > > > Thanks.
    > > > >
    > > > > --
    > > > > Dmitry
    > > > >
    > > > > sd 2:0:0:0: Attached scsi generic sg1 type 0
    > > > > sd 2:0:0:0: [sda] 16777216 512-byte logical blocks: (8.58 GB/8.00 GiB)
    > > > > sd 2:0:0:0: [sda] Write Protect is off
    > > > > sd 2:0:0:0: [sda] Cache data unavailable
    > > > > sd 2:0:0:0: [sda] Assuming drive cache: write through
    > > > > sd 2:0:0:0: [sda] Cache data unavailable
    > > > > sd 2:0:0:0: [sda] Assuming drive cache: write through
    > > > > sda: sda1 sda2
    > > > > sd 2:0:0:0: [sda] Cache data unavailable
    > > > > sd 2:0:0:0: [sda] Assuming drive cache: write through
    > > > > sd 2:0:0:0: [sda] Attached SCSI disk
    > > > > device-mapper: multipath: version 1.1.1 loaded
    > > > > dracut: Scanning devices sda2 for LVM volume groups
    > > > > dracut: Reading all physical volumes. This may take a while...
    > > > > dracut: Found volume group "VolGroup" using metadata type lvm2
    > > > > dracut: 2 logical volume(s) in volume group "VolGroup" now active
    > > > > EXT4-fs (dm-0): mounted filesystem with ordered data mode
    > > > > BUG: unable to handle kernel NULL pointer dereference at (null)
    > > > > IP: [<ffffffff81128ee1>] mpage_end_io_read+0x45/0x6f
    > > > > PGD 3b776067 PUD 3b7b1067 PMD 0
    > > > > Oops: 0002 [#1] SMP
    > > > > last sysfs file: /sys/kernel/uevent_seqnum
    > > > > CPU 0
    > > > > Modules linked in: dm_multipath mptspi mptscsih mptbase scsi_transport_spi floppy [last unloaded: scsi_wait_scan]
    > > > >
    > > > > Pid: 1, comm: init Not tainted 2.6.33 #4 440BX Desktop Reference Platform/VMware Virtual Platform
    > > > > RIP: 0010:[<ffffffff81128ee1>] [<ffffffff81128ee1>] mpage_end_io_read+0x45/0x6f
    > > >
    > > > Can you check where that is? Just do a gdb vmlinux and then an
    > > > l *mpage_end_io_read+0x45
    > >
    > > I tried checking mine here, but we must be using vastly different gcc
    > > versions. So I'd like that output. Can you also try and see if reverting
    > > 9f7cdbc33f36d28e57eaba0093f68f0d14c38c5b makes it work?
    >
    > OK, so disasm of that reveals that
    >
    > 12: 3e 80 0f 08 orb $0x8,%ds:(%rdi)
    >
    > is the start of the faulting instruction. You are running UP. 0x8 is the
    > 4th bit, so I'd be surprised if that isn't SetPageUptodate(page).
    >

    Sorry, don't have access to that box at the moment... Will try checking
    tomorrow.

    --
    Dmitry


    \
     
     \ /
      Last update: 2010-03-02 10:39    [W:0.028 / U:0.272 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site