lkml.org 
[lkml]   [2010]   [Mar]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCHv4 2/2] powerpc: implement arch_scale_smt_power for Power7
From
Date
On Sat, 2010-02-27 at 21:21 +1100, Michael Neuling wrote:
> In message <11927.1267010024@neuling.org> you wrote:
> > > > If there's less the group will normally be balanced and we fall out and
> > > > end up in check_asym_packing().
> > > >
> > > > So what I tried doing with that loop is detect if there's a hole in the
> > > > packing before busiest. Now that I think about it, what we need to check
> > > > is if this_cpu (the removed cpu argument) is idle and less than busiest.
> > > >
> > > > So something like:
> > > >
> > > > static int check_asym_pacing(struct sched_domain *sd,
> > > > struct sd_lb_stats *sds,
> > > > int this_cpu, unsigned long *imbalance)
> > > > {
> > > > int busiest_cpu;
> > > >
> > > > if (!(sd->flags & SD_ASYM_PACKING))
> > > > return 0;
> > > >
> > > > if (!sds->busiest)
> > > > return 0;
> > > >
> > > > busiest_cpu = group_first_cpu(sds->busiest);
> > > > if (cpu_rq(this_cpu)->nr_running || this_cpu > busiest_cpu)
> > > > return 0;
> > > >
> > > > *imbalance = (sds->max_load * sds->busiest->cpu_power) /
> > > > SCHED_LOAD_SCALE;
> > > > return 1;
> > > > }
> > > >
> > > > Does that make sense?
> > >
> > > I think so.
> > >
> > > I'm seeing check_asym_packing do the right thing with the simple SMT2
> > > with 1 process case. It marks cpu0 as imbalanced when cpu0 is idle and
> > > cpu1 is busy.
> > >
> > > Unfortunately the process doesn't seem to be get migrated down though.
> > > Do we need to give *imbalance a higher value?
> >
> > So with ego help, I traced this down a bit more.
> >
> > In my simple test case (SMT2, t0 idle, t1 active) if f_b_g() hits our
> > new case in check_asym_packing(), load_balance then runs f_b_q().
> > f_b_q() has this:
> >
> > if (capacity && rq->nr_running == 1 && wl > imbalance)
> > continue;
> >
> > when check_asym_packing() hits, wl = 1783 and imbalance = 1024, so we
> > continue and busiest remains NULL.
> >
> > load_balance then does "goto out_balanced" and it doesn't attempt to
> > move the task.
> >
> > Based on this and on egos suggestion I pulled in Suresh Siddha patch
> > from: http://lkml.org/lkml/2010/2/12/352. This fixes the problem. The
> > process is moved down to t0.
> >
> > I've only tested SMT2 so far.
>
> I'm finding this SMT2 result to be unreliable. Sometimes it doesn't work
> for the simple 1 process case. It seems to change boot to boot.
> Sometimes it works as expected with t0 busy and t1 idle, but other times
> it's the other way around.
>
> When it doesn't work, check_asym_packing() is still marking processes to
> be pulled down but only gets run about 1 in every 4 calls to
> load_balance().
>
> For 2 of the other calls to load_balance, idle is CPU_NEWLY_IDLE and
> hence check_asym_packing() doesn't get called. This results in
> sd->nr_balance_failed being reset. When load_balance is next called and
> check_asym_packing() hits, need_active_balance() returns 0 as
> sd->nr_balance_failed is too small. This means the migration thread on
> t1 is not woken and the process remains there.
>
> So why does thread0 change from NEWLY_IDLE to IDLE and visa versa, when
> there is nothing running on it? Is this expected?

Ah, yes, you should probably allow both those.

NEWLY_IDLE is when we are about to schedule the idle thread, IDLE is
when a tick hits the idle thread.

I'm thinking that NEWLY_IDLE should also solve the NO_HZ case, since
we'll have passed through that before we enter tickless state, just make
sure SD_BALANCE_NEWIDLE is set on the relevant levels (should already be
so).





\
 
 \ /
  Last update: 2010-03-02 15:47    [W:0.070 / U:0.368 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site