lkml.org 
[lkml]   [2010]   [Mar]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/3] mfd: add support for Janz CMOD-IO PCI MODULbus Carrier Board
Ira W. Snyder wrote:
> The Janz CMOD-IO PCI MODULbus carrier board is a PCI to MODULbus bridge,
> which may host many different types of MODULbus daughterboards, including
> CAN and GPIO controllers.
>
> Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
> Cc: Samuel Ortiz <sameo@linux.intel.com>

You can add my "Reviewed-by: Wolfgang Grandegger <wg@grandegger.com>".

Just one concern:

> ---
> drivers/mfd/Kconfig | 8 +
> drivers/mfd/Makefile | 1 +
> drivers/mfd/janz-cmodio.c | 339 +++++++++++++++++++++++++++++++++++++++++++++
> include/linux/mfd/janz.h | 54 +++++++
> 4 files changed, 402 insertions(+), 0 deletions(-)
> create mode 100644 drivers/mfd/janz-cmodio.c
> create mode 100644 include/linux/mfd/janz.h
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 8782978..f1858d7 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -27,6 +27,14 @@ config MFD_SM501_GPIO
> lines on the SM501. The platform data is used to supply the
> base number for the first GPIO line to register.
>
> +config MFD_JANZ_CMODIO
> + tristate "Support for Janz CMOD-IO PCI MODULbus Carrier Board"
> + ---help---
> + This is the core driver for the Janz CMOD-IO PCI MODULbus
> + carrier board. This device is a PCI to MODULbus bridge which may
> + host many different types of MODULbus daughterboards, including
> + CAN and GPIO controllers.
> +
> config MFD_ASIC3
> bool "Support for Compaq ASIC3"
> depends on GENERIC_HARDIRQS && GPIOLIB && ARM
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index e09eb48..e8fa905 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -3,6 +3,7 @@
> #
>
> obj-$(CONFIG_MFD_SM501) += sm501.o
> +obj-$(CONFIG_MFD_JANZ_CMODIO) += janz-cmodio.o
> obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o
> obj-$(CONFIG_MFD_SH_MOBILE_SDHI) += sh_mobile_sdhi.o
>
> diff --git a/drivers/mfd/janz-cmodio.c b/drivers/mfd/janz-cmodio.c
> new file mode 100644
> index 0000000..914280e
> --- /dev/null
> +++ b/drivers/mfd/janz-cmodio.c
> @@ -0,0 +1,339 @@
> +/*
> + * Janz CMOD-IO MODULbus Carrier Board PCI Driver
> + *
> + * Copyright (c) 2010 Ira W. Snyder <iws@ovro.caltech.edu>
> + *
> + * Lots of inspiration and code was copied from drivers/mfd/sm501.c
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/pci.h>
> +#include <linux/interrupt.h>
> +#include <linux/delay.h>
> +#include <linux/platform_device.h>
> +
> +#include <linux/mfd/janz.h>
> +
> +#define DRV_NAME "janz-cmodio"
> +
> +/* Size of each MODULbus module in PCI BAR4 */
> +#define CMODIO_MODULBUS_SIZE 0x200
> +
> +/* Maximum number of MODULbus modules on a CMOD-IO carrier board */
> +#define CMODIO_MAX_MODULES 4
> +
> +/* Module Parameters */
> +static unsigned int num_modules = CMODIO_MAX_MODULES;
> +static unsigned char *modules[CMODIO_MAX_MODULES] = {
> + "janz-ican3",
> + "janz-ican3",
> + "",
> + "janz-ttl",
> +};

This is probably not a good default but just your private configuration.

Wolfgang.


\
 
 \ /
  Last update: 2010-03-19 10:17    [W:0.083 / U:3.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site