lkml.org 
[lkml]   [2010]   [Mar]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject2.6.33 GP fault only when built with tracing
I can build/boot 2.6.33 with CONFIG_TRACE/TRACING disabled successfully,
but when I enable lots of tracing config options and then boot with
ftrace=nop on the kernel command line, I see a GP fault when the parport &
parport_pc modules are loading/initializing.

It happens in drivers/parport/share.c::parport_register_device(), when that
function calls try_module_get().

If I comment out the trace_module_get() calls in include/linux/module.h,
the kernel boots with no problems.

[ 21.852829] general protection fault: 0000 [#1] SMP
[ 21.856321] last sysfs file: /sys/module/parport/initstate
[ 21.856321] CPU 0
[ 21.856321] Pid: 2089, comm: modprobe Not tainted 2.6.33 #11 0HH807/OptiPlex GX620
[ 21.856321] RIP: 0010:[<ffffffffa0437671>] [<ffffffffa0437671>] parport_register_device+0xe4/0x48c [parport]
[ 21.856321] RSP: 0018:ffff8800765cba78 EFLAGS: 00010283
[ 21.856321] RAX: ffff10007b04a3d0 RBX: ffff88007a6a5e30 RCX: 0000000000000000
[ 21.856321] RDX: 0000000000000000 RSI: ffffffffa043d1de RDI: ffff88007a6a5e30
[ 21.856321] RBP: ffff8800765cbad8 R08: 0000000000000000 R09: 0000000000000000
[ 21.856321] R10: ffffffffa043dff8 R11: 0000000000000000 R12: ffffffffa043d1de
[ 21.856321] R13: ffffffffa043d1de R14: ffffffffa045c940 R15: 0000000000000000
[ 21.856321] FS: 00007f09cc3fb6f0(0000) GS:ffff880004a00000(0000) knlGS:0000000000000000
[ 21.856321] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 21.856321] CR2: 0000003fb5ad62c0 CR3: 00000000764f6000 CR4: 00000000000006f0
[ 21.856321] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 21.856321] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 21.856321] Process modprobe (pid: 2089, threadinfo ffff8800765ca000, task ffff88007664a3d0)
[ 21.856321] Stack:
[ 21.856321] ffff8800765cbab8 0000000000000206 0000000000000000 ffffffff812abaf2
[ 21.856321] <0> 0000000000000000 0000000000000000 ffffffffa043d1de 00000000ffffffff
[ 21.856321] <0> ffff88007a6a5e30 ffffffffa043d1de 0000000000000000 0000000000000378
[ 21.856321] Call Trace:
[ 21.856321] [<ffffffff812abaf2>] ? do_raw_spin_unlock+0xd7/0xe7
[ 21.856321] [<ffffffffa043b385>] parport_open+0x12d/0x14d [parport]
[ 21.856321] [<ffffffffa043bccf>] parport_device_id+0x2e/0xa00 [parport]
[ 21.856321] [<ffffffff8117ab73>] ? __slab_alloc+0x560/0x5f7
[ 21.856321] [<ffffffffa043bb06>] ? parport_daisy_init+0x55f/0x665 [parport]
[ 21.856321] [<ffffffffa043bb06>] ? parport_daisy_init+0x55f/0x665 [parport]
[ 21.856321] [<ffffffffa043bb53>] parport_daisy_init+0x5ac/0x665 [parport]
[ 21.856321] [<ffffffffa0436f6d>] parport_announce_port+0x1a/0x201 [parport]
[ 21.856321] [<ffffffffa0456848>] parport_pc_probe_port+0x13a5/0x1478 [parport_pc]
[ 21.856321] [<ffffffffa0456c36>] parport_pc_pnp_probe+0x31b/0x358 [parport_pc]
[ 21.856321] [<ffffffff81323b1f>] pnp_device_probe+0x11a/0x15e
[ 21.856321] [<ffffffff81376f15>] ? driver_sysfs_add+0x61/0x9b
[ 21.856321] [<ffffffff81377223>] driver_probe_device+0x1bc/0x339
[ 21.856321] [<ffffffff8137743e>] __driver_attach+0x9e/0xde
[ 21.856321] [<ffffffff813773a0>] ? __driver_attach+0x0/0xde
[ 21.856321] [<ffffffff81376038>] bus_for_each_dev+0x83/0xdb
[ 21.856321] [<ffffffff81376e26>] driver_attach+0x25/0x2e
[ 21.856321] [<ffffffff81376823>] bus_add_driver+0x14c/0x367
[ 21.856321] [<ffffffff813778e7>] driver_register+0xf8/0x1b2
[ 21.856321] [<ffffffff81323771>] pnp_register_driver+0x28/0x31
[ 21.856321] [<ffffffffa046380b>] parport_pc_init+0x708/0x7fa [parport_pc]
[ 21.856321] [<ffffffffa0463103>] ? parport_pc_init+0x0/0x7fa [parport_pc]
[ 21.856321] [<ffffffff810020d6>] do_one_initcall+0x9c/0x223
[ 21.856321] [<ffffffff810bcfd9>] sys_init_module+0x139/0x32b
[ 21.856321] [<ffffffff8100c732>] system_call_fastpath+0x16/0x1b
[ 21.856321] Code: 65 8b 14 25 d8 e3 00 00 41 83 3e 02 0f 84 80 00 00 00 48 ff 05 09 72 00 00 48 63 d2 49 8b 86 28 02 00 00 48 03 04 d5 b0 97 b9 81 <48> ff 00 49 8b 86 28 02 00 00 48 03 04 d5 b0 97 b9 81 48 8b 00
[ 21.856321] RIP [<ffffffffa0437671>] parport_register_device+0xe4/0x48c [parport]
[ 21.856321] RSP <ffff8800765cba78>
[ 22.192206] ---[ end trace 892b5882bd1f8c3e ]---


Full kernel boot log is attached.

Is this perhaps already fixed after 2.6.33?

thanks,
--
~Randy
\
 
 \ /
  Last update: 2010-03-19 00:29    [W:3.366 / U:0.404 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site