lkml.org 
[lkml]   [2010]   [Mar]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 17/17] Staging: comedi: fix indent coding style issue in adl_pci9118.c
Date
Patch to the adl_pci9118.c that fixes, ERROR: code indent should use tabs where possible, found by the checkpatch.pl tool

Signed-off-by: Maurice Dawson <mauricedawson2699@googlemail.com>
---
drivers/staging/comedi/drivers/adl_pci9118.c | 20 ++++++++++----------
1 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/staging/comedi/drivers/adl_pci9118.c b/drivers/staging/comedi/drivers/adl_pci9118.c
index 791ea83..9f30dee 100644
--- a/drivers/staging/comedi/drivers/adl_pci9118.c
+++ b/drivers/staging/comedi/drivers/adl_pci9118.c
@@ -44,20 +44,20 @@ c) If isn't used DMA then you can use only mode where
Configuration options:
[0] - PCI bus of device (optional)
[1] - PCI slot of device (optional)
- If bus/slot is not specified, then first available PCI
- card will be used.
+ If bus/slot is not specified, then first available PCI
+ card will be used.
[2] - 0= standard 8 DIFF/16 SE channels configuration
- n= external multiplexer connected, 1<=n<=256
+ n = external multiplexer connected, 1 <= n <= 256
[3] - 0=autoselect DMA or EOC interrupts operation
- 1=disable DMA mode
- 3=disable DMA and INT, only insn interface will work
+ 1 = disable DMA mode
+ 3 = disable DMA and INT, only insn interface will work
[4] - sample&hold signal - card can generate signal for external S&H board
- 0=use SSHO (pin 45) signal is generated in onboard hardware S&H logic
- 0!=use ADCHN7 (pin 23) signal is generated from driver, number
- say how long delay is requested in ns and sign polarity of the hold
- (in this case external multiplexor can serve only 128 channels)
+ 0 = use SSHO(pin 45) signal is generated in onboard hardware S&H logic
+ 0 != use ADCHN7(pin 23) signal is generated from driver, number say how
+ long delay is requested in ns and sign polarity of the hold
+ (in this case external multiplexor can serve only 128 channels)
[5] - 0=stop measure on all hardware errors
- 2|=ignore ADOR - A/D Overrun status
+ 2 | = ignore ADOR - A/D Overrun status
8|=ignore Bover - A/D Burst Mode Overrun status
256|=ignore nFull - A/D FIFO Full status

--
1.6.3.3


\
 
 \ /
  Last update: 2010-03-17 14:43    [W:1.241 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site