lkml.org 
[lkml]   [2010]   [Mar]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/1] PCMCIA: resource, fix lock imbalance
ACK, applied -- even though this code path is actually unused in current
kernels.

Thanks,
Dominik

On Tue, Mar 16, 2010 at 03:57:44PM +0100, Jiri Slaby wrote:
> Stanse found that one error path (when alloc_skb fails) in netdev_tx
> omits to unlock hw_priv->hwlock. Fix that by moving away from unlock in
> each fail path. Unlock at one place instead.
>
> Introduced in 94a819f80297e1f635a7cde4ed5317612e512ba7
> (pcmcia: assert locking to struct pcmcia_device)
>
> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
> Cc: Dominik Brodowski <linux@dominikbrodowski.net>
> ---
> drivers/pcmcia/pcmcia_resource.c | 28 ++++++++++++++++------------
> 1 files changed, 16 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
> index b2df041..add962a 100644
> --- a/drivers/pcmcia/pcmcia_resource.c
> +++ b/drivers/pcmcia/pcmcia_resource.c
> @@ -256,6 +256,7 @@ int pcmcia_modify_configuration(struct pcmcia_device *p_dev,
> {
> struct pcmcia_socket *s;
> config_t *c;
> + int ret;
>
> s = p_dev->socket;
>
> @@ -264,13 +265,13 @@ int pcmcia_modify_configuration(struct pcmcia_device *p_dev,
>
> if (!(s->state & SOCKET_PRESENT)) {
> dev_dbg(&s->dev, "No card present\n");
> - mutex_unlock(&s->ops_mutex);
> - return -ENODEV;
> + ret = -ENODEV;
> + goto unlock;
> }
> if (!(c->state & CONFIG_LOCKED)) {
> dev_dbg(&s->dev, "Configuration isnt't locked\n");
> - mutex_unlock(&s->ops_mutex);
> - return -EACCES;
> + ret = -EACCES;
> + goto unlock;
> }
>
> if (mod->Attributes & CONF_IRQ_CHANGE_VALID) {
> @@ -286,7 +287,8 @@ int pcmcia_modify_configuration(struct pcmcia_device *p_dev,
>
> if (mod->Attributes & CONF_VCC_CHANGE_VALID) {
> dev_dbg(&s->dev, "changing Vcc is not allowed at this time\n");
> - return -EINVAL;
> + ret = -EINVAL;
> + goto unlock;
> }
>
> /* We only allow changing Vpp1 and Vpp2 to the same value */
> @@ -294,21 +296,21 @@ int pcmcia_modify_configuration(struct pcmcia_device *p_dev,
> (mod->Attributes & CONF_VPP2_CHANGE_VALID)) {
> if (mod->Vpp1 != mod->Vpp2) {
> dev_dbg(&s->dev, "Vpp1 and Vpp2 must be the same\n");
> - mutex_unlock(&s->ops_mutex);
> - return -EINVAL;
> + ret = -EINVAL;
> + goto unlock;
> }
> s->socket.Vpp = mod->Vpp1;
> if (s->ops->set_socket(s, &s->socket)) {
> - mutex_unlock(&s->ops_mutex);
> dev_printk(KERN_WARNING, &s->dev,
> "Unable to set VPP\n");
> - return -EIO;
> + ret = -EIO;
> + goto unlock;
> }
> } else if ((mod->Attributes & CONF_VPP1_CHANGE_VALID) ||
> (mod->Attributes & CONF_VPP2_CHANGE_VALID)) {
> dev_dbg(&s->dev, "changing Vcc is not allowed at this time\n");
> - mutex_unlock(&s->ops_mutex);
> - return -EINVAL;
> + ret = -EINVAL;
> + goto unlock;
> }
>
> if (mod->Attributes & CONF_IO_CHANGE_WIDTH) {
> @@ -332,9 +334,11 @@ int pcmcia_modify_configuration(struct pcmcia_device *p_dev,
> s->ops->set_io_map(s, &io_on);
> }
> }
> + ret = 0;
> +unlock:
> mutex_unlock(&s->ops_mutex);
>
> - return 0;
> + return ret;
> } /* modify_configuration */
> EXPORT_SYMBOL(pcmcia_modify_configuration);
>
> --
> 1.7.0.1
>
>


\
 
 \ /
  Last update: 2010-03-16 18:01    [W:0.034 / U:0.812 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site