lkml.org 
[lkml]   [2010]   [Mar]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    Date
    From
    Subject[122/145] USB: ftdi_sio: isolate all device IDs to new ftdi_sio_ids.h header
    2.6.32-stable review patch.  If anyone has any objections, please let me know.

    ----------------
    From: Andreas Mohr <andi@lisas.de>

    commit 31844d55800e1b93fe75c4d6188a4a44db2e1bbe upstream.

    This is a strictly move-only patch to relocate all FTDI device
    product ID definitions to their own ftdi_sio_ids.h header
    (following the usual *_ids.h kernel tree convention, too),
    thus correcting the slightly too messy appearance
    (crucial driver defines were stuck somewhere in the decaying middle swamp
    of the huge existing header).

    Compile-tested, based on latest mainline git.

    Signed-off-by: Andreas Mohr <andi@lisas.de>
    Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

    ---
    drivers/usb/serial/ftdi_sio.c | 1
    drivers/usb/serial/ftdi_sio.h | 959 --------------------------------------
    drivers/usb/serial/ftdi_sio_ids.h | 959 ++++++++++++++++++++++++++++++++++++++
    3 files changed, 964 insertions(+), 955 deletions(-)

    --- a/drivers/usb/serial/ftdi_sio.c
    +++ b/drivers/usb/serial/ftdi_sio.c
    @@ -44,6 +44,7 @@
    #include <linux/serial.h>
    #include <linux/usb/serial.h>
    #include "ftdi_sio.h"
    +#include "ftdi_sio_ids.h"

    /*
    * Version Information
    --- a/drivers/usb/serial/ftdi_sio.h
    +++ b/drivers/usb/serial/ftdi_sio.h
    @@ -1,7 +1,10 @@
    /*
    - * Definitions for the FTDI USB Single Port Serial Converter -
    + * Driver definitions for the FTDI USB Single Port Serial Converter -
    * known as FTDI_SIO (Serial Input/Output application of the chipset)
    *
    + * For USB vendor/product IDs (VID/PID), please see ftdi_sio_ids.h
    + *
    + *
    * The example I have is known as the USC-1000 which is available from
    * http://www.dse.co.nz - cat no XH4214 It looks similar to this:
    * http://www.dansdata.com/usbser.htm but I can't be sure There are other
    @@ -17,880 +20,7 @@
    * Bill Ryder - bryder@sgi.com formerly of Silicon Graphics, Inc.- wrote the
    * FTDI_SIO implementation.
    *
    - * Philipp Gühring - pg@futureware.at - added the Device ID of the USB relais
    - * from Rudolf Gugler
    - *
    - */
    -
    -#define FTDI_VID 0x0403 /* Vendor Id */
    -#define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */
    -#define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */
    -#define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */
    -#define FTDI_8U2232C_PID 0x6010 /* Dual channel device */
    -#define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */
    -#define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */
    -#define FTDI_RELAIS_PID 0xFA10 /* Relais device from Rudolf Gugler */
    -#define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */
    -#define FTDI_NF_RIC_PID 0x0001 /* Product Id */
    -#define FTDI_USBX_707_PID 0xF857 /* ADSTech IR Blaster USBX-707 */
    -
    -/* Larsen and Brusgaard AltiTrack/USBtrack */
    -#define LARSENBRUSGAARD_VID 0x0FD8
    -#define LB_ALTITRACK_PID 0x0001
    -
    -/* www.canusb.com Lawicel CANUSB device */
    -#define FTDI_CANUSB_PID 0xFFA8 /* Product Id */
    -
    -/* AlphaMicro Components AMC-232USB01 device */
    -#define FTDI_AMC232_PID 0xFF00 /* Product Id */
    -
    -/* www.candapter.com Ewert Energy Systems CANdapter device */
    -#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
    -
    -/* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */
    -/* the VID is the standard ftdi vid (FTDI_VID) */
    -#define FTDI_SCS_DEVICE_0_PID 0xD010 /* SCS PTC-IIusb */
    -#define FTDI_SCS_DEVICE_1_PID 0xD011 /* SCS Tracker / DSP TNC */
    -#define FTDI_SCS_DEVICE_2_PID 0xD012
    -#define FTDI_SCS_DEVICE_3_PID 0xD013
    -#define FTDI_SCS_DEVICE_4_PID 0xD014
    -#define FTDI_SCS_DEVICE_5_PID 0xD015
    -#define FTDI_SCS_DEVICE_6_PID 0xD016
    -#define FTDI_SCS_DEVICE_7_PID 0xD017
    -
    -/* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */
    -#define FTDI_ACTZWAVE_PID 0xF2D0
    -
    -
    -/* www.starting-point-systems.com µChameleon device */
    -#define FTDI_MICRO_CHAMELEON_PID 0xCAA0 /* Product Id */
    -
    -/* www.irtrans.de device */
    -#define FTDI_IRTRANS_PID 0xFC60 /* Product Id */
    -
    -
    -/* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */
    -#define FTDI_TTUSB_PID 0xFF20 /* Product Id */
    -
    -/* iPlus device */
    -#define FTDI_IPLUS_PID 0xD070 /* Product Id */
    -#define FTDI_IPLUS2_PID 0xD071 /* Product Id */
    -
    -/* DMX4ALL DMX Interfaces */
    -#define FTDI_DMX4ALL 0xC850
    -
    -/* OpenDCC (www.opendcc.de) product id */
    -#define FTDI_OPENDCC_PID 0xBFD8
    -#define FTDI_OPENDCC_SNIFFER_PID 0xBFD9
    -#define FTDI_OPENDCC_THROTTLE_PID 0xBFDA
    -#define FTDI_OPENDCC_GATEWAY_PID 0xBFDB
    -
    -/* Sprog II (Andrew Crosland's SprogII DCC interface) */
    -#define FTDI_SPROG_II 0xF0C8
    -
    -/* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */
    -/* they use the ftdi chipset for the USB interface and the vendor id is the same */
    -#define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */
    -#define FTDI_XF_634_PID 0xFC09 /* 634: 20x4 Character Display */
    -#define FTDI_XF_547_PID 0xFC0A /* 547: Two line Display */
    -#define FTDI_XF_633_PID 0xFC0B /* 633: 16x2 Character Display with Keys */
    -#define FTDI_XF_631_PID 0xFC0C /* 631: 20x2 Character Display */
    -#define FTDI_XF_635_PID 0xFC0D /* 635: 20x4 Character Display */
    -#define FTDI_XF_640_PID 0xFC0E /* 640: Two line Display */
    -#define FTDI_XF_642_PID 0xFC0F /* 642: Two line Display */
    -
    -/* Video Networks Limited / Homechoice in the UK use an ftdi-based device for their 1Mb */
    -/* broadband internet service. The following PID is exhibited by the usb device supplied */
    -/* (the VID is the standard ftdi vid (FTDI_VID) */
    -#define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */
    -
    -/*
    - * PCDJ use ftdi based dj-controllers. The following PID is for their DAC-2 device
    - * http://www.pcdjhardware.com/DAC2.asp (PID sent by Wouter Paesen)
    - * (the VID is the standard ftdi vid (FTDI_VID) */
    -#define FTDI_PCDJ_DAC2_PID 0xFA88
    -
    -/*
    - * The following are the values for the Matrix Orbital LCD displays,
    - * which are the FT232BM ( similar to the 8U232AM )
    - */
    -#define FTDI_MTXORB_0_PID 0xFA00 /* Matrix Orbital Product Id */
    -#define FTDI_MTXORB_1_PID 0xFA01 /* Matrix Orbital Product Id */
    -#define FTDI_MTXORB_2_PID 0xFA02 /* Matrix Orbital Product Id */
    -#define FTDI_MTXORB_3_PID 0xFA03 /* Matrix Orbital Product Id */
    -#define FTDI_MTXORB_4_PID 0xFA04 /* Matrix Orbital Product Id */
    -#define FTDI_MTXORB_5_PID 0xFA05 /* Matrix Orbital Product Id */
    -#define FTDI_MTXORB_6_PID 0xFA06 /* Matrix Orbital Product Id */
    -
    -/* OOCDlink by Joern Kaipf <joernk@web.de>
    - * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */
    -#define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */
    -
    -/*
    - * The following are the values for the Matrix Orbital FTDI Range
    - * Anything in this range will use an FT232RL.
    - */
    -#define MTXORB_VID 0x1B3D
    -#define MTXORB_FTDI_RANGE_0100_PID 0x0100
    -#define MTXORB_FTDI_RANGE_0101_PID 0x0101
    -#define MTXORB_FTDI_RANGE_0102_PID 0x0102
    -#define MTXORB_FTDI_RANGE_0103_PID 0x0103
    -#define MTXORB_FTDI_RANGE_0104_PID 0x0104
    -#define MTXORB_FTDI_RANGE_0105_PID 0x0105
    -#define MTXORB_FTDI_RANGE_0106_PID 0x0106
    -#define MTXORB_FTDI_RANGE_0107_PID 0x0107
    -#define MTXORB_FTDI_RANGE_0108_PID 0x0108
    -#define MTXORB_FTDI_RANGE_0109_PID 0x0109
    -#define MTXORB_FTDI_RANGE_010A_PID 0x010A
    -#define MTXORB_FTDI_RANGE_010B_PID 0x010B
    -#define MTXORB_FTDI_RANGE_010C_PID 0x010C
    -#define MTXORB_FTDI_RANGE_010D_PID 0x010D
    -#define MTXORB_FTDI_RANGE_010E_PID 0x010E
    -#define MTXORB_FTDI_RANGE_010F_PID 0x010F
    -#define MTXORB_FTDI_RANGE_0110_PID 0x0110
    -#define MTXORB_FTDI_RANGE_0111_PID 0x0111
    -#define MTXORB_FTDI_RANGE_0112_PID 0x0112
    -#define MTXORB_FTDI_RANGE_0113_PID 0x0113
    -#define MTXORB_FTDI_RANGE_0114_PID 0x0114
    -#define MTXORB_FTDI_RANGE_0115_PID 0x0115
    -#define MTXORB_FTDI_RANGE_0116_PID 0x0116
    -#define MTXORB_FTDI_RANGE_0117_PID 0x0117
    -#define MTXORB_FTDI_RANGE_0118_PID 0x0118
    -#define MTXORB_FTDI_RANGE_0119_PID 0x0119
    -#define MTXORB_FTDI_RANGE_011A_PID 0x011A
    -#define MTXORB_FTDI_RANGE_011B_PID 0x011B
    -#define MTXORB_FTDI_RANGE_011C_PID 0x011C
    -#define MTXORB_FTDI_RANGE_011D_PID 0x011D
    -#define MTXORB_FTDI_RANGE_011E_PID 0x011E
    -#define MTXORB_FTDI_RANGE_011F_PID 0x011F
    -#define MTXORB_FTDI_RANGE_0120_PID 0x0120
    -#define MTXORB_FTDI_RANGE_0121_PID 0x0121
    -#define MTXORB_FTDI_RANGE_0122_PID 0x0122
    -#define MTXORB_FTDI_RANGE_0123_PID 0x0123
    -#define MTXORB_FTDI_RANGE_0124_PID 0x0124
    -#define MTXORB_FTDI_RANGE_0125_PID 0x0125
    -#define MTXORB_FTDI_RANGE_0126_PID 0x0126
    -#define MTXORB_FTDI_RANGE_0127_PID 0x0127
    -#define MTXORB_FTDI_RANGE_0128_PID 0x0128
    -#define MTXORB_FTDI_RANGE_0129_PID 0x0129
    -#define MTXORB_FTDI_RANGE_012A_PID 0x012A
    -#define MTXORB_FTDI_RANGE_012B_PID 0x012B
    -#define MTXORB_FTDI_RANGE_012C_PID 0x012C
    -#define MTXORB_FTDI_RANGE_012D_PID 0x012D
    -#define MTXORB_FTDI_RANGE_012E_PID 0x012E
    -#define MTXORB_FTDI_RANGE_012F_PID 0x012F
    -#define MTXORB_FTDI_RANGE_0130_PID 0x0130
    -#define MTXORB_FTDI_RANGE_0131_PID 0x0131
    -#define MTXORB_FTDI_RANGE_0132_PID 0x0132
    -#define MTXORB_FTDI_RANGE_0133_PID 0x0133
    -#define MTXORB_FTDI_RANGE_0134_PID 0x0134
    -#define MTXORB_FTDI_RANGE_0135_PID 0x0135
    -#define MTXORB_FTDI_RANGE_0136_PID 0x0136
    -#define MTXORB_FTDI_RANGE_0137_PID 0x0137
    -#define MTXORB_FTDI_RANGE_0138_PID 0x0138
    -#define MTXORB_FTDI_RANGE_0139_PID 0x0139
    -#define MTXORB_FTDI_RANGE_013A_PID 0x013A
    -#define MTXORB_FTDI_RANGE_013B_PID 0x013B
    -#define MTXORB_FTDI_RANGE_013C_PID 0x013C
    -#define MTXORB_FTDI_RANGE_013D_PID 0x013D
    -#define MTXORB_FTDI_RANGE_013E_PID 0x013E
    -#define MTXORB_FTDI_RANGE_013F_PID 0x013F
    -#define MTXORB_FTDI_RANGE_0140_PID 0x0140
    -#define MTXORB_FTDI_RANGE_0141_PID 0x0141
    -#define MTXORB_FTDI_RANGE_0142_PID 0x0142
    -#define MTXORB_FTDI_RANGE_0143_PID 0x0143
    -#define MTXORB_FTDI_RANGE_0144_PID 0x0144
    -#define MTXORB_FTDI_RANGE_0145_PID 0x0145
    -#define MTXORB_FTDI_RANGE_0146_PID 0x0146
    -#define MTXORB_FTDI_RANGE_0147_PID 0x0147
    -#define MTXORB_FTDI_RANGE_0148_PID 0x0148
    -#define MTXORB_FTDI_RANGE_0149_PID 0x0149
    -#define MTXORB_FTDI_RANGE_014A_PID 0x014A
    -#define MTXORB_FTDI_RANGE_014B_PID 0x014B
    -#define MTXORB_FTDI_RANGE_014C_PID 0x014C
    -#define MTXORB_FTDI_RANGE_014D_PID 0x014D
    -#define MTXORB_FTDI_RANGE_014E_PID 0x014E
    -#define MTXORB_FTDI_RANGE_014F_PID 0x014F
    -#define MTXORB_FTDI_RANGE_0150_PID 0x0150
    -#define MTXORB_FTDI_RANGE_0151_PID 0x0151
    -#define MTXORB_FTDI_RANGE_0152_PID 0x0152
    -#define MTXORB_FTDI_RANGE_0153_PID 0x0153
    -#define MTXORB_FTDI_RANGE_0154_PID 0x0154
    -#define MTXORB_FTDI_RANGE_0155_PID 0x0155
    -#define MTXORB_FTDI_RANGE_0156_PID 0x0156
    -#define MTXORB_FTDI_RANGE_0157_PID 0x0157
    -#define MTXORB_FTDI_RANGE_0158_PID 0x0158
    -#define MTXORB_FTDI_RANGE_0159_PID 0x0159
    -#define MTXORB_FTDI_RANGE_015A_PID 0x015A
    -#define MTXORB_FTDI_RANGE_015B_PID 0x015B
    -#define MTXORB_FTDI_RANGE_015C_PID 0x015C
    -#define MTXORB_FTDI_RANGE_015D_PID 0x015D
    -#define MTXORB_FTDI_RANGE_015E_PID 0x015E
    -#define MTXORB_FTDI_RANGE_015F_PID 0x015F
    -#define MTXORB_FTDI_RANGE_0160_PID 0x0160
    -#define MTXORB_FTDI_RANGE_0161_PID 0x0161
    -#define MTXORB_FTDI_RANGE_0162_PID 0x0162
    -#define MTXORB_FTDI_RANGE_0163_PID 0x0163
    -#define MTXORB_FTDI_RANGE_0164_PID 0x0164
    -#define MTXORB_FTDI_RANGE_0165_PID 0x0165
    -#define MTXORB_FTDI_RANGE_0166_PID 0x0166
    -#define MTXORB_FTDI_RANGE_0167_PID 0x0167
    -#define MTXORB_FTDI_RANGE_0168_PID 0x0168
    -#define MTXORB_FTDI_RANGE_0169_PID 0x0169
    -#define MTXORB_FTDI_RANGE_016A_PID 0x016A
    -#define MTXORB_FTDI_RANGE_016B_PID 0x016B
    -#define MTXORB_FTDI_RANGE_016C_PID 0x016C
    -#define MTXORB_FTDI_RANGE_016D_PID 0x016D
    -#define MTXORB_FTDI_RANGE_016E_PID 0x016E
    -#define MTXORB_FTDI_RANGE_016F_PID 0x016F
    -#define MTXORB_FTDI_RANGE_0170_PID 0x0170
    -#define MTXORB_FTDI_RANGE_0171_PID 0x0171
    -#define MTXORB_FTDI_RANGE_0172_PID 0x0172
    -#define MTXORB_FTDI_RANGE_0173_PID 0x0173
    -#define MTXORB_FTDI_RANGE_0174_PID 0x0174
    -#define MTXORB_FTDI_RANGE_0175_PID 0x0175
    -#define MTXORB_FTDI_RANGE_0176_PID 0x0176
    -#define MTXORB_FTDI_RANGE_0177_PID 0x0177
    -#define MTXORB_FTDI_RANGE_0178_PID 0x0178
    -#define MTXORB_FTDI_RANGE_0179_PID 0x0179
    -#define MTXORB_FTDI_RANGE_017A_PID 0x017A
    -#define MTXORB_FTDI_RANGE_017B_PID 0x017B
    -#define MTXORB_FTDI_RANGE_017C_PID 0x017C
    -#define MTXORB_FTDI_RANGE_017D_PID 0x017D
    -#define MTXORB_FTDI_RANGE_017E_PID 0x017E
    -#define MTXORB_FTDI_RANGE_017F_PID 0x017F
    -#define MTXORB_FTDI_RANGE_0180_PID 0x0180
    -#define MTXORB_FTDI_RANGE_0181_PID 0x0181
    -#define MTXORB_FTDI_RANGE_0182_PID 0x0182
    -#define MTXORB_FTDI_RANGE_0183_PID 0x0183
    -#define MTXORB_FTDI_RANGE_0184_PID 0x0184
    -#define MTXORB_FTDI_RANGE_0185_PID 0x0185
    -#define MTXORB_FTDI_RANGE_0186_PID 0x0186
    -#define MTXORB_FTDI_RANGE_0187_PID 0x0187
    -#define MTXORB_FTDI_RANGE_0188_PID 0x0188
    -#define MTXORB_FTDI_RANGE_0189_PID 0x0189
    -#define MTXORB_FTDI_RANGE_018A_PID 0x018A
    -#define MTXORB_FTDI_RANGE_018B_PID 0x018B
    -#define MTXORB_FTDI_RANGE_018C_PID 0x018C
    -#define MTXORB_FTDI_RANGE_018D_PID 0x018D
    -#define MTXORB_FTDI_RANGE_018E_PID 0x018E
    -#define MTXORB_FTDI_RANGE_018F_PID 0x018F
    -#define MTXORB_FTDI_RANGE_0190_PID 0x0190
    -#define MTXORB_FTDI_RANGE_0191_PID 0x0191
    -#define MTXORB_FTDI_RANGE_0192_PID 0x0192
    -#define MTXORB_FTDI_RANGE_0193_PID 0x0193
    -#define MTXORB_FTDI_RANGE_0194_PID 0x0194
    -#define MTXORB_FTDI_RANGE_0195_PID 0x0195
    -#define MTXORB_FTDI_RANGE_0196_PID 0x0196
    -#define MTXORB_FTDI_RANGE_0197_PID 0x0197
    -#define MTXORB_FTDI_RANGE_0198_PID 0x0198
    -#define MTXORB_FTDI_RANGE_0199_PID 0x0199
    -#define MTXORB_FTDI_RANGE_019A_PID 0x019A
    -#define MTXORB_FTDI_RANGE_019B_PID 0x019B
    -#define MTXORB_FTDI_RANGE_019C_PID 0x019C
    -#define MTXORB_FTDI_RANGE_019D_PID 0x019D
    -#define MTXORB_FTDI_RANGE_019E_PID 0x019E
    -#define MTXORB_FTDI_RANGE_019F_PID 0x019F
    -#define MTXORB_FTDI_RANGE_01A0_PID 0x01A0
    -#define MTXORB_FTDI_RANGE_01A1_PID 0x01A1
    -#define MTXORB_FTDI_RANGE_01A2_PID 0x01A2
    -#define MTXORB_FTDI_RANGE_01A3_PID 0x01A3
    -#define MTXORB_FTDI_RANGE_01A4_PID 0x01A4
    -#define MTXORB_FTDI_RANGE_01A5_PID 0x01A5
    -#define MTXORB_FTDI_RANGE_01A6_PID 0x01A6
    -#define MTXORB_FTDI_RANGE_01A7_PID 0x01A7
    -#define MTXORB_FTDI_RANGE_01A8_PID 0x01A8
    -#define MTXORB_FTDI_RANGE_01A9_PID 0x01A9
    -#define MTXORB_FTDI_RANGE_01AA_PID 0x01AA
    -#define MTXORB_FTDI_RANGE_01AB_PID 0x01AB
    -#define MTXORB_FTDI_RANGE_01AC_PID 0x01AC
    -#define MTXORB_FTDI_RANGE_01AD_PID 0x01AD
    -#define MTXORB_FTDI_RANGE_01AE_PID 0x01AE
    -#define MTXORB_FTDI_RANGE_01AF_PID 0x01AF
    -#define MTXORB_FTDI_RANGE_01B0_PID 0x01B0
    -#define MTXORB_FTDI_RANGE_01B1_PID 0x01B1
    -#define MTXORB_FTDI_RANGE_01B2_PID 0x01B2
    -#define MTXORB_FTDI_RANGE_01B3_PID 0x01B3
    -#define MTXORB_FTDI_RANGE_01B4_PID 0x01B4
    -#define MTXORB_FTDI_RANGE_01B5_PID 0x01B5
    -#define MTXORB_FTDI_RANGE_01B6_PID 0x01B6
    -#define MTXORB_FTDI_RANGE_01B7_PID 0x01B7
    -#define MTXORB_FTDI_RANGE_01B8_PID 0x01B8
    -#define MTXORB_FTDI_RANGE_01B9_PID 0x01B9
    -#define MTXORB_FTDI_RANGE_01BA_PID 0x01BA
    -#define MTXORB_FTDI_RANGE_01BB_PID 0x01BB
    -#define MTXORB_FTDI_RANGE_01BC_PID 0x01BC
    -#define MTXORB_FTDI_RANGE_01BD_PID 0x01BD
    -#define MTXORB_FTDI_RANGE_01BE_PID 0x01BE
    -#define MTXORB_FTDI_RANGE_01BF_PID 0x01BF
    -#define MTXORB_FTDI_RANGE_01C0_PID 0x01C0
    -#define MTXORB_FTDI_RANGE_01C1_PID 0x01C1
    -#define MTXORB_FTDI_RANGE_01C2_PID 0x01C2
    -#define MTXORB_FTDI_RANGE_01C3_PID 0x01C3
    -#define MTXORB_FTDI_RANGE_01C4_PID 0x01C4
    -#define MTXORB_FTDI_RANGE_01C5_PID 0x01C5
    -#define MTXORB_FTDI_RANGE_01C6_PID 0x01C6
    -#define MTXORB_FTDI_RANGE_01C7_PID 0x01C7
    -#define MTXORB_FTDI_RANGE_01C8_PID 0x01C8
    -#define MTXORB_FTDI_RANGE_01C9_PID 0x01C9
    -#define MTXORB_FTDI_RANGE_01CA_PID 0x01CA
    -#define MTXORB_FTDI_RANGE_01CB_PID 0x01CB
    -#define MTXORB_FTDI_RANGE_01CC_PID 0x01CC
    -#define MTXORB_FTDI_RANGE_01CD_PID 0x01CD
    -#define MTXORB_FTDI_RANGE_01CE_PID 0x01CE
    -#define MTXORB_FTDI_RANGE_01CF_PID 0x01CF
    -#define MTXORB_FTDI_RANGE_01D0_PID 0x01D0
    -#define MTXORB_FTDI_RANGE_01D1_PID 0x01D1
    -#define MTXORB_FTDI_RANGE_01D2_PID 0x01D2
    -#define MTXORB_FTDI_RANGE_01D3_PID 0x01D3
    -#define MTXORB_FTDI_RANGE_01D4_PID 0x01D4
    -#define MTXORB_FTDI_RANGE_01D5_PID 0x01D5
    -#define MTXORB_FTDI_RANGE_01D6_PID 0x01D6
    -#define MTXORB_FTDI_RANGE_01D7_PID 0x01D7
    -#define MTXORB_FTDI_RANGE_01D8_PID 0x01D8
    -#define MTXORB_FTDI_RANGE_01D9_PID 0x01D9
    -#define MTXORB_FTDI_RANGE_01DA_PID 0x01DA
    -#define MTXORB_FTDI_RANGE_01DB_PID 0x01DB
    -#define MTXORB_FTDI_RANGE_01DC_PID 0x01DC
    -#define MTXORB_FTDI_RANGE_01DD_PID 0x01DD
    -#define MTXORB_FTDI_RANGE_01DE_PID 0x01DE
    -#define MTXORB_FTDI_RANGE_01DF_PID 0x01DF
    -#define MTXORB_FTDI_RANGE_01E0_PID 0x01E0
    -#define MTXORB_FTDI_RANGE_01E1_PID 0x01E1
    -#define MTXORB_FTDI_RANGE_01E2_PID 0x01E2
    -#define MTXORB_FTDI_RANGE_01E3_PID 0x01E3
    -#define MTXORB_FTDI_RANGE_01E4_PID 0x01E4
    -#define MTXORB_FTDI_RANGE_01E5_PID 0x01E5
    -#define MTXORB_FTDI_RANGE_01E6_PID 0x01E6
    -#define MTXORB_FTDI_RANGE_01E7_PID 0x01E7
    -#define MTXORB_FTDI_RANGE_01E8_PID 0x01E8
    -#define MTXORB_FTDI_RANGE_01E9_PID 0x01E9
    -#define MTXORB_FTDI_RANGE_01EA_PID 0x01EA
    -#define MTXORB_FTDI_RANGE_01EB_PID 0x01EB
    -#define MTXORB_FTDI_RANGE_01EC_PID 0x01EC
    -#define MTXORB_FTDI_RANGE_01ED_PID 0x01ED
    -#define MTXORB_FTDI_RANGE_01EE_PID 0x01EE
    -#define MTXORB_FTDI_RANGE_01EF_PID 0x01EF
    -#define MTXORB_FTDI_RANGE_01F0_PID 0x01F0
    -#define MTXORB_FTDI_RANGE_01F1_PID 0x01F1
    -#define MTXORB_FTDI_RANGE_01F2_PID 0x01F2
    -#define MTXORB_FTDI_RANGE_01F3_PID 0x01F3
    -#define MTXORB_FTDI_RANGE_01F4_PID 0x01F4
    -#define MTXORB_FTDI_RANGE_01F5_PID 0x01F5
    -#define MTXORB_FTDI_RANGE_01F6_PID 0x01F6
    -#define MTXORB_FTDI_RANGE_01F7_PID 0x01F7
    -#define MTXORB_FTDI_RANGE_01F8_PID 0x01F8
    -#define MTXORB_FTDI_RANGE_01F9_PID 0x01F9
    -#define MTXORB_FTDI_RANGE_01FA_PID 0x01FA
    -#define MTXORB_FTDI_RANGE_01FB_PID 0x01FB
    -#define MTXORB_FTDI_RANGE_01FC_PID 0x01FC
    -#define MTXORB_FTDI_RANGE_01FD_PID 0x01FD
    -#define MTXORB_FTDI_RANGE_01FE_PID 0x01FE
    -#define MTXORB_FTDI_RANGE_01FF_PID 0x01FF
    -
    -
    -
    -/* Interbiometrics USB I/O Board */
    -/* Developed for Interbiometrics by Rudolf Gugler */
    -#define INTERBIOMETRICS_VID 0x1209
    -#define INTERBIOMETRICS_IOBOARD_PID 0x1002
    -#define INTERBIOMETRICS_MINI_IOBOARD_PID 0x1006
    -
    -/*
    - * The following are the values for the Perle Systems
    - * UltraPort USB serial converters
    - */
    -#define FTDI_PERLE_ULTRAPORT_PID 0xF0C0 /* Perle UltraPort Product Id */
    -
    -/*
    - * The following are the values for the Sealevel SeaLINK+ adapters.
    - * (Original list sent by Tuan Hoang. Ian Abbott renamed the macros and
    - * removed some PIDs that don't seem to match any existing products.)
    - */
    -#define SEALEVEL_VID 0x0c52 /* Sealevel Vendor ID */
    -#define SEALEVEL_2101_PID 0x2101 /* SeaLINK+232 (2101/2105) */
    -#define SEALEVEL_2102_PID 0x2102 /* SeaLINK+485 (2102) */
    -#define SEALEVEL_2103_PID 0x2103 /* SeaLINK+232I (2103) */
    -#define SEALEVEL_2104_PID 0x2104 /* SeaLINK+485I (2104) */
    -#define SEALEVEL_2106_PID 0x9020 /* SeaLINK+422 (2106) */
    -#define SEALEVEL_2201_1_PID 0x2211 /* SeaPORT+2/232 (2201) Port 1 */
    -#define SEALEVEL_2201_2_PID 0x2221 /* SeaPORT+2/232 (2201) Port 2 */
    -#define SEALEVEL_2202_1_PID 0x2212 /* SeaPORT+2/485 (2202) Port 1 */
    -#define SEALEVEL_2202_2_PID 0x2222 /* SeaPORT+2/485 (2202) Port 2 */
    -#define SEALEVEL_2203_1_PID 0x2213 /* SeaPORT+2 (2203) Port 1 */
    -#define SEALEVEL_2203_2_PID 0x2223 /* SeaPORT+2 (2203) Port 2 */
    -#define SEALEVEL_2401_1_PID 0x2411 /* SeaPORT+4/232 (2401) Port 1 */
    -#define SEALEVEL_2401_2_PID 0x2421 /* SeaPORT+4/232 (2401) Port 2 */
    -#define SEALEVEL_2401_3_PID 0x2431 /* SeaPORT+4/232 (2401) Port 3 */
    -#define SEALEVEL_2401_4_PID 0x2441 /* SeaPORT+4/232 (2401) Port 4 */
    -#define SEALEVEL_2402_1_PID 0x2412 /* SeaPORT+4/485 (2402) Port 1 */
    -#define SEALEVEL_2402_2_PID 0x2422 /* SeaPORT+4/485 (2402) Port 2 */
    -#define SEALEVEL_2402_3_PID 0x2432 /* SeaPORT+4/485 (2402) Port 3 */
    -#define SEALEVEL_2402_4_PID 0x2442 /* SeaPORT+4/485 (2402) Port 4 */
    -#define SEALEVEL_2403_1_PID 0x2413 /* SeaPORT+4 (2403) Port 1 */
    -#define SEALEVEL_2403_2_PID 0x2423 /* SeaPORT+4 (2403) Port 2 */
    -#define SEALEVEL_2403_3_PID 0x2433 /* SeaPORT+4 (2403) Port 3 */
    -#define SEALEVEL_2403_4_PID 0x2443 /* SeaPORT+4 (2403) Port 4 */
    -#define SEALEVEL_2801_1_PID 0X2811 /* SeaLINK+8/232 (2801) Port 1 */
    -#define SEALEVEL_2801_2_PID 0X2821 /* SeaLINK+8/232 (2801) Port 2 */
    -#define SEALEVEL_2801_3_PID 0X2831 /* SeaLINK+8/232 (2801) Port 3 */
    -#define SEALEVEL_2801_4_PID 0X2841 /* SeaLINK+8/232 (2801) Port 4 */
    -#define SEALEVEL_2801_5_PID 0X2851 /* SeaLINK+8/232 (2801) Port 5 */
    -#define SEALEVEL_2801_6_PID 0X2861 /* SeaLINK+8/232 (2801) Port 6 */
    -#define SEALEVEL_2801_7_PID 0X2871 /* SeaLINK+8/232 (2801) Port 7 */
    -#define SEALEVEL_2801_8_PID 0X2881 /* SeaLINK+8/232 (2801) Port 8 */
    -#define SEALEVEL_2802_1_PID 0X2812 /* SeaLINK+8/485 (2802) Port 1 */
    -#define SEALEVEL_2802_2_PID 0X2822 /* SeaLINK+8/485 (2802) Port 2 */
    -#define SEALEVEL_2802_3_PID 0X2832 /* SeaLINK+8/485 (2802) Port 3 */
    -#define SEALEVEL_2802_4_PID 0X2842 /* SeaLINK+8/485 (2802) Port 4 */
    -#define SEALEVEL_2802_5_PID 0X2852 /* SeaLINK+8/485 (2802) Port 5 */
    -#define SEALEVEL_2802_6_PID 0X2862 /* SeaLINK+8/485 (2802) Port 6 */
    -#define SEALEVEL_2802_7_PID 0X2872 /* SeaLINK+8/485 (2802) Port 7 */
    -#define SEALEVEL_2802_8_PID 0X2882 /* SeaLINK+8/485 (2802) Port 8 */
    -#define SEALEVEL_2803_1_PID 0X2813 /* SeaLINK+8 (2803) Port 1 */
    -#define SEALEVEL_2803_2_PID 0X2823 /* SeaLINK+8 (2803) Port 2 */
    -#define SEALEVEL_2803_3_PID 0X2833 /* SeaLINK+8 (2803) Port 3 */
    -#define SEALEVEL_2803_4_PID 0X2843 /* SeaLINK+8 (2803) Port 4 */
    -#define SEALEVEL_2803_5_PID 0X2853 /* SeaLINK+8 (2803) Port 5 */
    -#define SEALEVEL_2803_6_PID 0X2863 /* SeaLINK+8 (2803) Port 6 */
    -#define SEALEVEL_2803_7_PID 0X2873 /* SeaLINK+8 (2803) Port 7 */
    -#define SEALEVEL_2803_8_PID 0X2883 /* SeaLINK+8 (2803) Port 8 */
    -
    -/*
    - * The following are the values for two KOBIL chipcard terminals.
    - */
    -#define KOBIL_VID 0x0d46 /* KOBIL Vendor ID */
    -#define KOBIL_CONV_B1_PID 0x2020 /* KOBIL Konverter for B1 */
    -#define KOBIL_CONV_KAAN_PID 0x2021 /* KOBIL_Konverter for KAAN */
    -
    -/*
    - * Icom ID-1 digital transceiver
    - */
    -
    -#define ICOM_ID1_VID 0x0C26
    -#define ICOM_ID1_PID 0x0004
    -
    -/*
    - * ASK.fr devices
    - */
    -#define FTDI_ASK_RDR400_PID 0xC991 /* ASK RDR 400 series card reader */
    -
    -/*
    - * FTDI USB UART chips used in construction projects from the
    - * Elektor Electronics magazine (http://elektor-electronics.co.uk)
    - */
    -#define ELEKTOR_VID 0x0C7D
    -#define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */
    -
    -/*
    - * DSS-20 Sync Station for Sony Ericsson P800
    - */
    -#define FTDI_DSS20_PID 0xFC82
    -
    -/*
    - * Home Electronics (www.home-electro.com) USB gadgets
    - */
    -#define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */
    -
    -/* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */
    -/* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */
    -#define FTDI_USB_UIRT_PID 0xF850 /* Product Id */
    -
    -/* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */
    -
    -#define FTDI_TNC_X_PID 0xEBE0
    -
    -/*
    - * ELV USB devices submitted by Christian Abt of ELV (www.elv.de).
    - * All of these devices use FTDI's vendor ID (0x0403).
    - *
    - * The previously included PID for the UO 100 module was incorrect.
    - * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58).
    - *
    - * Armin Laeuger originally sent the PID for the UM 100 module.
    - */
    -#define FTDI_R2000KU_TRUE_RNG 0xFB80 /* R2000KU TRUE RNG */
    -#define FTDI_ELV_UR100_PID 0xFB58 /* USB-RS232-Umsetzer (UR 100) */
    -#define FTDI_ELV_UM100_PID 0xFB5A /* USB-Modul UM 100 */
    -#define FTDI_ELV_UO100_PID 0xFB5B /* USB-Modul UO 100 */
    -#define FTDI_ELV_ALC8500_PID 0xF06E /* ALC 8500 Expert */
    -/* Additional ELV PIDs that default to using the FTDI D2XX drivers on
    - * MS Windows, rather than the FTDI Virtual Com Port drivers.
    - * Maybe these will be easier to use with the libftdi/libusb user-space
    - * drivers, or possibly the Comedi drivers in some cases. */
    -#define FTDI_ELV_CLI7000_PID 0xFB59 /* Computer-Light-Interface (CLI 7000) */
    -#define FTDI_ELV_PPS7330_PID 0xFB5C /* Processor-Power-Supply (PPS 7330) */
    -#define FTDI_ELV_TFM100_PID 0xFB5D /* Temperartur-Feuchte Messgeraet (TFM 100) */
    -#define FTDI_ELV_UDF77_PID 0xFB5E /* USB DCF Funkurh (UDF 77) */
    -#define FTDI_ELV_UIO88_PID 0xFB5F /* USB-I/O Interface (UIO 88) */
    -#define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */
    -#define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */
    -#define FTDI_ELV_USI2_PID 0xF06A /* USB-Schrittmotoren-Interface (USI 2) */
    -#define FTDI_ELV_T1100_PID 0xF06B /* Thermometer (T 1100) */
    -#define FTDI_ELV_PCD200_PID 0xF06C /* PC-Datenlogger (PCD 200) */
    -#define FTDI_ELV_ULA200_PID 0xF06D /* USB-LCD-Ansteuerung (ULA 200) */
    -#define FTDI_ELV_FHZ1000PC_PID 0xF06F /* FHZ 1000 PC */
    -#define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */
    -#define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */
    -#define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */
    -#define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */
    -#define FTDI_ELV_FS20SIG_PID 0xE0F4 /* Signalgeber (FS 20 SIG) */
    -#define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */
    -#define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */
    -#define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */
    -#define FTDI_ELV_HS485_PID 0xE0EA /* USB to RS-485 adapter */
    -#define FTDI_ELV_EM1010PC_PID 0xE0EF /* Engery monitor EM 1010 PC */
    -#define FTDI_PHI_FISCO_PID 0xE40B /* PHI Fisco USB to Serial cable */
    -
    -/*
    - * Definitions for ID TECH (www.idt-net.com) devices
    - */
    -#define IDTECH_VID 0x0ACD /* ID TECH Vendor ID */
    -#define IDTECH_IDT1221U_PID 0x0300 /* IDT1221U USB to RS-232 adapter */
    -
    -/*
    - * Definitions for Omnidirectional Control Technology, Inc. devices
    - */
    -#define OCT_VID 0x0B39 /* OCT vendor ID */
    -/* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */
    -/* Also rebadged as Dick Smith Electronics (Aus) XH6451 */
    -/* Also rebadged as SIIG Inc. model US2308 hardware version 1 */
    -#define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */
    -
    -/* an infrared receiver for user access control with IR tags */
    -#define FTDI_PIEGROUP_PID 0xF208 /* Product Id */
    -
    -/*
    - * Definitions for Artemis astronomical USB based cameras
    - * Check it at http://www.artemisccd.co.uk/
    - */
    -#define FTDI_ARTEMIS_PID 0xDF28 /* All Artemis Cameras */
    -
    -/*
    - * Definitions for ATIK Instruments astronomical USB based cameras
    - * Check it at http://www.atik-instruments.com/
    - */
    -#define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Grayscale Camera */
    -#define FTDI_ATIK_ATK16C_PID 0xDF32 /* ATIK ATK-16C Colour Camera */
    -#define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Grayscale Camera */
    -#define FTDI_ATIK_ATK16HRC_PID 0xDF33 /* ATIK ATK-16HRC Colour Camera */
    -#define FTDI_ATIK_ATK16IC_PID 0xDF35 /* ATIK ATK-16IC Grayscale Camera */
    -
    -/*
    - * Protego product ids
    - */
    -#define PROTEGO_SPECIAL_1 0xFC70 /* special/unknown device */
    -#define PROTEGO_R2X0 0xFC71 /* R200-USB TRNG unit (R210, R220, and R230) */
    -#define PROTEGO_SPECIAL_3 0xFC72 /* special/unknown device */
    -#define PROTEGO_SPECIAL_4 0xFC73 /* special/unknown device */
    -
    -/*
    - * Gude Analog- und Digitalsysteme GmbH
    - */
    -#define FTDI_GUDEADS_E808_PID 0xE808
    -#define FTDI_GUDEADS_E809_PID 0xE809
    -#define FTDI_GUDEADS_E80A_PID 0xE80A
    -#define FTDI_GUDEADS_E80B_PID 0xE80B
    -#define FTDI_GUDEADS_E80C_PID 0xE80C
    -#define FTDI_GUDEADS_E80D_PID 0xE80D
    -#define FTDI_GUDEADS_E80E_PID 0xE80E
    -#define FTDI_GUDEADS_E80F_PID 0xE80F
    -#define FTDI_GUDEADS_E888_PID 0xE888 /* Expert ISDN Control USB */
    -#define FTDI_GUDEADS_E889_PID 0xE889 /* USB RS-232 OptoBridge */
    -#define FTDI_GUDEADS_E88A_PID 0xE88A
    -#define FTDI_GUDEADS_E88B_PID 0xE88B
    -#define FTDI_GUDEADS_E88C_PID 0xE88C
    -#define FTDI_GUDEADS_E88D_PID 0xE88D
    -#define FTDI_GUDEADS_E88E_PID 0xE88E
    -#define FTDI_GUDEADS_E88F_PID 0xE88F
    -
    -/*
    - * Linx Technologies product ids
    - */
    -#define LINX_SDMUSBQSS_PID 0xF448 /* Linx SDM-USB-QS-S */
    -#define LINX_MASTERDEVEL2_PID 0xF449 /* Linx Master Development 2.0 */
    -#define LINX_FUTURE_0_PID 0xF44A /* Linx future device */
    -#define LINX_FUTURE_1_PID 0xF44B /* Linx future device */
    -#define LINX_FUTURE_2_PID 0xF44C /* Linx future device */
    -
    -/* CCS Inc. ICDU/ICDU40 product ID - the FT232BM is used in an in-circuit-debugger */
    -/* unit for PIC16's/PIC18's */
    -#define FTDI_CCSICDU20_0_PID 0xF9D0
    -#define FTDI_CCSICDU40_1_PID 0xF9D1
    -#define FTDI_CCSMACHX_2_PID 0xF9D2
    -#define FTDI_CCSLOAD_N_GO_3_PID 0xF9D3
    -#define FTDI_CCSICDU64_4_PID 0xF9D4
    -#define FTDI_CCSPRIME8_5_PID 0xF9D5
    -
    -/* Inside Accesso contactless reader (http://www.insidefr.com) */
    -#define INSIDE_ACCESSO 0xFAD0
    -
    -/*
    - * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI
    - */
    -#define INTREPID_VID 0x093C
    -#define INTREPID_VALUECAN_PID 0x0601
    -#define INTREPID_NEOVI_PID 0x0701
    -
    -/*
    - * Falcom Wireless Communications GmbH
    - */
    -#define FALCOM_VID 0x0F94 /* Vendor Id */
    -#define FALCOM_TWIST_PID 0x0001 /* Falcom Twist USB GPRS modem */
    -#define FALCOM_SAMBA_PID 0x0005 /* Falcom Samba USB GPRS modem */
    -
    -/*
    - * SUUNTO product ids
    - */
    -#define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */
    -
    -/*
    - * Oceanic product ids
    - */
    -#define FTDI_OCEANIC_PID 0xF460 /* Oceanic dive instrument */
    -
    -/*
    - * TTi (Thurlby Thandar Instruments)
    - */
    -#define TTI_VID 0x103E /* Vendor Id */
    -#define TTI_QL355P_PID 0x03E8 /* TTi QL355P power supply */
    -
    -/*
    - * Definitions for B&B Electronics products.
    - */
    -#define BANDB_VID 0x0856 /* B&B Electronics Vendor ID */
    -#define BANDB_USOTL4_PID 0xAC01 /* USOTL4 Isolated RS-485 Converter */
    -#define BANDB_USTL4_PID 0xAC02 /* USTL4 RS-485 Converter */
    -#define BANDB_USO9ML2_PID 0xAC03 /* USO9ML2 Isolated RS-232 Converter */
    -#define BANDB_USOPTL4_PID 0xAC11
    -#define BANDB_USPTL4_PID 0xAC12
    -#define BANDB_USO9ML2DR_2_PID 0xAC16
    -#define BANDB_USO9ML2DR_PID 0xAC17
    -#define BANDB_USOPTL4DR2_PID 0xAC18 /* USOPTL4R-2 2-port Isolated RS-232 Converter */
    -#define BANDB_USOPTL4DR_PID 0xAC19
    -#define BANDB_485USB9F_2W_PID 0xAC25
    -#define BANDB_485USB9F_4W_PID 0xAC26
    -#define BANDB_232USB9M_PID 0xAC27
    -#define BANDB_485USBTB_2W_PID 0xAC33
    -#define BANDB_485USBTB_4W_PID 0xAC34
    -#define BANDB_TTL5USB9M_PID 0xAC49
    -#define BANDB_TTL3USB9M_PID 0xAC50
    -#define BANDB_ZZ_PROG1_USB_PID 0xBA02
    -
    -/*
    - * RM Michaelides CANview USB (http://www.rmcan.com)
    - * CAN fieldbus interface adapter, added by port GmbH www.port.de)
    - * Ian Abbott changed the macro names for consistency.
    - */
    -#define FTDI_RM_CANVIEW_PID 0xfd60 /* Product Id */
    -
    -/*
    - * EVER Eco Pro UPS (http://www.ever.com.pl/)
    - */
    -
    -#define EVER_ECO_PRO_CDS 0xe520 /* RS-232 converter */
    -
    -/*
    - * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485,
    - * USB-TTY activ, USB-TTY passiv. Some PIDs are used by several devices
    - * and I'm not entirely sure which are used by which.
    - */
    -#define FTDI_4N_GALAXY_DE_1_PID 0xF3C0
    -#define FTDI_4N_GALAXY_DE_2_PID 0xF3C1
    -
    -/*
    - * Mobility Electronics products.
    - */
    -#define MOBILITY_VID 0x1342
    -#define MOBILITY_USB_SERIAL_PID 0x0202 /* EasiDock USB 200 serial */
    -
    -/*
    - * microHAM product IDs (http://www.microham.com).
    - * Submitted by Justin Burket (KL1RL) <zorton@jtan.com>
    - * and Mike Studer (K6EEP) <k6eep@hamsoftware.org>.
    - * Ian Abbott <abbotti@mev.co.uk> added a few more from the driver INF file.
    - */
    -#define FTDI_MHAM_KW_PID 0xEEE8 /* USB-KW interface */
    -#define FTDI_MHAM_YS_PID 0xEEE9 /* USB-YS interface */
    -#define FTDI_MHAM_Y6_PID 0xEEEA /* USB-Y6 interface */
    -#define FTDI_MHAM_Y8_PID 0xEEEB /* USB-Y8 interface */
    -#define FTDI_MHAM_IC_PID 0xEEEC /* USB-IC interface */
    -#define FTDI_MHAM_DB9_PID 0xEEED /* USB-DB9 interface */
    -#define FTDI_MHAM_RS232_PID 0xEEEE /* USB-RS232 interface */
    -#define FTDI_MHAM_Y9_PID 0xEEEF /* USB-Y9 interface */
    -
    -/*
    - * Active Robots product ids.
    - */
    -#define FTDI_ACTIVE_ROBOTS_PID 0xE548 /* USB comms board */
    -
    -/*
    - * Xsens Technologies BV products (http://www.xsens.com).
    - */
    -#define XSENS_CONVERTER_0_PID 0xD388
    -#define XSENS_CONVERTER_1_PID 0xD389
    -#define XSENS_CONVERTER_2_PID 0xD38A
    -#define XSENS_CONVERTER_3_PID 0xD38B
    -#define XSENS_CONVERTER_4_PID 0xD38C
    -#define XSENS_CONVERTER_5_PID 0xD38D
    -#define XSENS_CONVERTER_6_PID 0xD38E
    -#define XSENS_CONVERTER_7_PID 0xD38F
    -
    -/*
    - * Teratronik product ids.
    - * Submitted by O. Wölfelschneider.
    - */
    -#define FTDI_TERATRONIK_VCP_PID 0xEC88 /* Teratronik device (preferring VCP driver on windows) */
    -#define FTDI_TERATRONIK_D2XX_PID 0xEC89 /* Teratronik device (preferring D2XX driver on windows) */
    -
    -/*
    - * Evolution Robotics products (http://www.evolution.com/).
    - * Submitted by Shawn M. Lavelle.
    - */
    -#define EVOLUTION_VID 0xDEEE /* Vendor ID */
    -#define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */
    -#define EVO_8U232AM_PID 0x02FF /* Evolution robotics RCM2 (FT232AM)*/
    -#define EVO_HYBRID_PID 0x0302 /* Evolution robotics RCM4 PID (FT232BM)*/
    -#define EVO_RCM4_PID 0x0303 /* Evolution robotics RCM4 PID */
    -
    -/* Pyramid Computer GmbH */
    -#define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */
    -
    -/*
    - * NDI (www.ndigital.com) product ids
    - */
    -#define FTDI_NDI_HUC_PID 0xDA70 /* NDI Host USB Converter */
    -#define FTDI_NDI_SPECTRA_SCU_PID 0xDA71 /* NDI Spectra SCU */
    -#define FTDI_NDI_FUTURE_2_PID 0xDA72 /* NDI future device #2 */
    -#define FTDI_NDI_FUTURE_3_PID 0xDA73 /* NDI future device #3 */
    -#define FTDI_NDI_AURORA_SCU_PID 0xDA74 /* NDI Aurora SCU */
    -
    -/*
    - * Posiflex inc retail equipment (http://www.posiflex.com.tw)
    - */
    -#define POSIFLEX_VID 0x0d3a /* Vendor ID */
    -#define POSIFLEX_PP7000_PID 0x0300 /* PP-7000II thermal printer */
    -
    -/*
    - * Westrex International devices submitted by Cory Lee
    - */
    -#define FTDI_WESTREX_MODEL_777_PID 0xDC00 /* Model 777 */
    -#define FTDI_WESTREX_MODEL_8900F_PID 0xDC01 /* Model 8900F */
    -
    -/*
    - * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com)
    - */
    -#define FTDI_RRCIRKITS_LOCOBUFFER_PID 0xc7d0 /* LocoBuffer USB */
    -
    -/*
    - * Eclo (http://www.eclo.pt/) product IDs.
    - * PID 0xEA90 submitted by Martin Grill.
    - */
    -#define FTDI_ECLO_COM_1WIRE_PID 0xEA90 /* COM to 1-Wire USB adaptor */
    -
    -/*
    - * Papouch products (http://www.papouch.com/)
    - * Submitted by Folkert van Heusden
    - */
    -
    -#define PAPOUCH_VID 0x5050 /* Vendor ID */
    -#define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */
    -#define PAPOUCH_QUIDO4x4_PID 0x0900 /* Quido 4/4 Module */
    -
    -/*
    - * ACG Identification Technologies GmbH products (http://www.acg.de/).
    - * Submitted by anton -at- goto10 -dot- org.
    - */
    -#define FTDI_ACG_HFDUAL_PID 0xDD20 /* HF Dual ISO Reader (RFID) */
    -
    -/*
    - * Yost Engineering, Inc. products (www.yostengineering.com).
    - * PID 0xE050 submitted by Aaron Prose.
    - */
    -#define FTDI_YEI_SERVOCENTER31_PID 0xE050 /* YEI ServoCenter3.1 USB */
    -
    -/*
    - * ThorLabs USB motor drivers
    - */
    -#define FTDI_THORLABS_PID 0xfaf0 /* ThorLabs USB motor drivers */
    -
    -/*
    - * Testo products (http://www.testo.com/)
    - * Submitted by Colin Leroy
    - */
    -#define TESTO_VID 0x128D
    -#define TESTO_USB_INTERFACE_PID 0x0001
    -
    -/*
    - * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com.
    - */
    -#define FTDI_GAMMA_SCOUT_PID 0xD678 /* Gamma Scout online */
    -
    -/*
    - * Tactrix OpenPort (ECU) devices.
    - * OpenPort 1.3M submitted by Donour Sizemore.
    - * OpenPort 1.3S and 1.3U submitted by Ian Abbott.
    - */
    -#define FTDI_TACTRIX_OPENPORT_13M_PID 0xCC48 /* OpenPort 1.3 Mitsubishi */
    -#define FTDI_TACTRIX_OPENPORT_13S_PID 0xCC49 /* OpenPort 1.3 Subaru */
    -#define FTDI_TACTRIX_OPENPORT_13U_PID 0xCC4A /* OpenPort 1.3 Universal */
    -
    -/*
    - * Telldus Technologies
    */
    -#define TELLDUS_VID 0x1781 /* Vendor ID */
    -#define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz using FT232RL */
    -
    -/*
    - * IBS elektronik product ids
    - * Submitted by Thomas Schleusener
    - */
    -#define FTDI_IBS_US485_PID 0xff38 /* IBS US485 (USB<-->RS422/485 interface) */
    -#define FTDI_IBS_PICPRO_PID 0xff39 /* IBS PIC-Programmer */
    -#define FTDI_IBS_PCMCIA_PID 0xff3a /* IBS Card reader for PCMCIA SRAM-cards */
    -#define FTDI_IBS_PK1_PID 0xff3b /* IBS PK1 - Particel counter */
    -#define FTDI_IBS_RS232MON_PID 0xff3c /* IBS RS232 - Monitor */
    -#define FTDI_IBS_APP70_PID 0xff3d /* APP 70 (dust monitoring system) */
    -#define FTDI_IBS_PEDO_PID 0xff3e /* IBS PEDO-Modem (RF modem 868.35 MHz) */
    -#define FTDI_IBS_PROD_PID 0xff3f /* future device */
    -
    -/*
    - * MaxStream devices www.maxstream.net
    - */
    -#define FTDI_MAXSTREAM_PID 0xEE18 /* Xbee PKG-U Module */
    -
    -/* Olimex */
    -#define OLIMEX_VID 0x15BA
    -#define OLIMEX_ARM_USB_OCD_PID 0x0003
    -
    -/* Luminary Micro Stellaris Boards, VID = FTDI_VID */
    -/* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */
    -#define LMI_LM3S_DEVEL_BOARD_PID 0xbcd8
    -#define LMI_LM3S_EVAL_BOARD_PID 0xbcd9
    -
    -/* www.elsterelectricity.com Elster Unicom III Optical Probe */
    -#define FTDI_ELSTER_UNICOM_PID 0xE700 /* Product Id */
    -
    -/*
    - * The Mobility Lab (TML)
    - * Submitted by Pierre Castella
    - */
    -#define TML_VID 0x1B91 /* Vendor ID */
    -#define TML_USB_SERIAL_PID 0x0064 /* USB - Serial Converter */
    -
    -/* Propox devices */
    -#define FTDI_PROPOX_JTAGCABLEII_PID 0xD738
    -
    -/* Rig Expert Ukraine devices */
    -#define FTDI_REU_TINY_PID 0xED22 /* RigExpert Tiny */
    -
    -/* Domintell products http://www.domintell.com */
    -#define FTDI_DOMINTELL_DGQG_PID 0xEF50 /* Master */
    -#define FTDI_DOMINTELL_DUSB_PID 0xEF51 /* DUSB01 module */
    -
    -/* Alti-2 products http://www.alti-2.com */
    -#define ALTI2_VID 0x1BC9
    -#define ALTI2_N3_PID 0x6001 /* Neptune 3 */

    /* Commands */
    #define FTDI_SIO_RESET 0 /* Reset the port */
    @@ -910,86 +40,6 @@
    #define INTERFACE_C 3
    #define INTERFACE_D 4

    -/*
    - * FIC / OpenMoko, Inc. http://wiki.openmoko.org/wiki/Neo1973_Debug_Board_v3
    - * Submitted by Harald Welte <laforge@openmoko.org>
    - */
    -#define FIC_VID 0x1457
    -#define FIC_NEO1973_DEBUG_PID 0x5118
    -
    -/*
    - * RATOC REX-USB60F
    - */
    -#define RATOC_VENDOR_ID 0x0584
    -#define RATOC_PRODUCT_ID_USB60F 0xb020
    -
    -/*
    - * DIEBOLD BCS SE923
    - */
    -#define DIEBOLD_BCS_SE923_PID 0xfb99
    -
    -/*
    - * Atmel STK541
    - */
    -#define ATMEL_VID 0x03eb /* Vendor ID */
    -#define STK541_PID 0x2109 /* Zigbee Controller */
    -
    -/*
    - * Dresden Elektronic Sensor Terminal Board
    - */
    -#define DE_VID 0x1cf1 /* Vendor ID */
    -#define STB_PID 0x0001 /* Sensor Terminal Board */
    -#define WHT_PID 0x0004 /* Wireless Handheld Terminal */
    -
    -/*
    - * Blackfin gnICE JTAG
    - * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice
    - */
    -#define ADI_VID 0x0456
    -#define ADI_GNICE_PID 0xF000
    -#define ADI_GNICEPLUS_PID 0xF001
    -
    -/*
    - * JETI SPECTROMETER SPECBOS 1201
    - * http://www.jeti.com/products/sys/scb/scb1201.php
    - */
    -#define JETI_VID 0x0c6c
    -#define JETI_SPC1201_PID 0x04b2
    -
    -/*
    - * Marvell SheevaPlug
    - */
    -#define MARVELL_VID 0x9e88
    -#define MARVELL_SHEEVAPLUG_PID 0x9e8f
    -
    -#define FTDI_TURTELIZER_PID 0xBDC8 /* JTAG/RS-232 adapter by egnite GmBH */
    -
    -/*
    - * GN Otometrics (http://www.otometrics.com)
    - * Submitted by Ville Sundberg.
    - */
    -#define GN_OTOMETRICS_VID 0x0c33 /* Vendor ID */
    -#define AURICAL_USB_PID 0x0010 /* Aurical USB Audiometer */
    -
    -/*
    - * Bayer Ascensia Contour blood glucose meter USB-converter cable.
    - * http://winglucofacts.com/cables/
    - */
    -#define BAYER_VID 0x1A79
    -#define BAYER_CONTOUR_CABLE_PID 0x6001
    -
    -/*
    - * Marvell OpenRD Base, Client
    - * http://www.open-rd.org
    - * OpenRD Base, Client use VID 0x0403
    - */
    -#define MARVELL_OPENRD_PID 0x9e90
    -
    -/*
    - * Hameg HO820 and HO870 interface (using VID 0x0403)
    - */
    -#define HAMEG_HO820_PID 0xed74
    -#define HAMEG_HO870_PID 0xed71

    /*
    * BmRequestType: 1100 0000b
    @@ -1504,4 +554,3 @@ typedef enum {
    * B2..7 Length of message - (not including Byte 0)
    *
    */
    -
    --- /dev/null
    +++ b/drivers/usb/serial/ftdi_sio_ids.h
    @@ -0,0 +1,959 @@
    +/*
    + * vendor/product IDs (VID/PID) of devices using FTDI USB serial converters.
    + *
    + * Philipp Gühring - pg@futureware.at - added the Device ID of the USB relais
    + * from Rudolf Gugler
    + *
    + */
    +
    +#define FTDI_VID 0x0403 /* Vendor Id */
    +#define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */
    +#define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */
    +#define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */
    +#define FTDI_8U2232C_PID 0x6010 /* Dual channel device */
    +#define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */
    +#define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */
    +#define FTDI_RELAIS_PID 0xFA10 /* Relais device from Rudolf Gugler */
    +#define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */
    +#define FTDI_NF_RIC_PID 0x0001 /* Product Id */
    +#define FTDI_USBX_707_PID 0xF857 /* ADSTech IR Blaster USBX-707 */
    +
    +/* Larsen and Brusgaard AltiTrack/USBtrack */
    +#define LARSENBRUSGAARD_VID 0x0FD8
    +#define LB_ALTITRACK_PID 0x0001
    +
    +/* www.canusb.com Lawicel CANUSB device */
    +#define FTDI_CANUSB_PID 0xFFA8 /* Product Id */
    +
    +/* AlphaMicro Components AMC-232USB01 device */
    +#define FTDI_AMC232_PID 0xFF00 /* Product Id */
    +
    +/* www.candapter.com Ewert Energy Systems CANdapter device */
    +#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
    +
    +/* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */
    +/* the VID is the standard ftdi vid (FTDI_VID) */
    +#define FTDI_SCS_DEVICE_0_PID 0xD010 /* SCS PTC-IIusb */
    +#define FTDI_SCS_DEVICE_1_PID 0xD011 /* SCS Tracker / DSP TNC */
    +#define FTDI_SCS_DEVICE_2_PID 0xD012
    +#define FTDI_SCS_DEVICE_3_PID 0xD013
    +#define FTDI_SCS_DEVICE_4_PID 0xD014
    +#define FTDI_SCS_DEVICE_5_PID 0xD015
    +#define FTDI_SCS_DEVICE_6_PID 0xD016
    +#define FTDI_SCS_DEVICE_7_PID 0xD017
    +
    +/* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */
    +#define FTDI_ACTZWAVE_PID 0xF2D0
    +
    +
    +/* www.starting-point-systems.com µChameleon device */
    +#define FTDI_MICRO_CHAMELEON_PID 0xCAA0 /* Product Id */
    +
    +/* www.irtrans.de device */
    +#define FTDI_IRTRANS_PID 0xFC60 /* Product Id */
    +
    +
    +/* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */
    +#define FTDI_TTUSB_PID 0xFF20 /* Product Id */
    +
    +/* iPlus device */
    +#define FTDI_IPLUS_PID 0xD070 /* Product Id */
    +#define FTDI_IPLUS2_PID 0xD071 /* Product Id */
    +
    +/* DMX4ALL DMX Interfaces */
    +#define FTDI_DMX4ALL 0xC850
    +
    +/* OpenDCC (www.opendcc.de) product id */
    +#define FTDI_OPENDCC_PID 0xBFD8
    +#define FTDI_OPENDCC_SNIFFER_PID 0xBFD9
    +#define FTDI_OPENDCC_THROTTLE_PID 0xBFDA
    +#define FTDI_OPENDCC_GATEWAY_PID 0xBFDB
    +
    +/* Sprog II (Andrew Crosland's SprogII DCC interface) */
    +#define FTDI_SPROG_II 0xF0C8
    +
    +/* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */
    +/* they use the ftdi chipset for the USB interface and the vendor id is the same */
    +#define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */
    +#define FTDI_XF_634_PID 0xFC09 /* 634: 20x4 Character Display */
    +#define FTDI_XF_547_PID 0xFC0A /* 547: Two line Display */
    +#define FTDI_XF_633_PID 0xFC0B /* 633: 16x2 Character Display with Keys */
    +#define FTDI_XF_631_PID 0xFC0C /* 631: 20x2 Character Display */
    +#define FTDI_XF_635_PID 0xFC0D /* 635: 20x4 Character Display */
    +#define FTDI_XF_640_PID 0xFC0E /* 640: Two line Display */
    +#define FTDI_XF_642_PID 0xFC0F /* 642: Two line Display */
    +
    +/* Video Networks Limited / Homechoice in the UK use an ftdi-based device for their 1Mb */
    +/* broadband internet service. The following PID is exhibited by the usb device supplied */
    +/* (the VID is the standard ftdi vid (FTDI_VID) */
    +#define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */
    +
    +/*
    + * PCDJ use ftdi based dj-controllers. The following PID is for their DAC-2 device
    + * http://www.pcdjhardware.com/DAC2.asp (PID sent by Wouter Paesen)
    + * (the VID is the standard ftdi vid (FTDI_VID) */
    +#define FTDI_PCDJ_DAC2_PID 0xFA88
    +
    +/*
    + * The following are the values for the Matrix Orbital LCD displays,
    + * which are the FT232BM ( similar to the 8U232AM )
    + */
    +#define FTDI_MTXORB_0_PID 0xFA00 /* Matrix Orbital Product Id */
    +#define FTDI_MTXORB_1_PID 0xFA01 /* Matrix Orbital Product Id */
    +#define FTDI_MTXORB_2_PID 0xFA02 /* Matrix Orbital Product Id */
    +#define FTDI_MTXORB_3_PID 0xFA03 /* Matrix Orbital Product Id */
    +#define FTDI_MTXORB_4_PID 0xFA04 /* Matrix Orbital Product Id */
    +#define FTDI_MTXORB_5_PID 0xFA05 /* Matrix Orbital Product Id */
    +#define FTDI_MTXORB_6_PID 0xFA06 /* Matrix Orbital Product Id */
    +
    +/* OOCDlink by Joern Kaipf <joernk@web.de>
    + * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */
    +#define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */
    +
    +/*
    + * The following are the values for the Matrix Orbital FTDI Range
    + * Anything in this range will use an FT232RL.
    + */
    +#define MTXORB_VID 0x1B3D
    +#define MTXORB_FTDI_RANGE_0100_PID 0x0100
    +#define MTXORB_FTDI_RANGE_0101_PID 0x0101
    +#define MTXORB_FTDI_RANGE_0102_PID 0x0102
    +#define MTXORB_FTDI_RANGE_0103_PID 0x0103
    +#define MTXORB_FTDI_RANGE_0104_PID 0x0104
    +#define MTXORB_FTDI_RANGE_0105_PID 0x0105
    +#define MTXORB_FTDI_RANGE_0106_PID 0x0106
    +#define MTXORB_FTDI_RANGE_0107_PID 0x0107
    +#define MTXORB_FTDI_RANGE_0108_PID 0x0108
    +#define MTXORB_FTDI_RANGE_0109_PID 0x0109
    +#define MTXORB_FTDI_RANGE_010A_PID 0x010A
    +#define MTXORB_FTDI_RANGE_010B_PID 0x010B
    +#define MTXORB_FTDI_RANGE_010C_PID 0x010C
    +#define MTXORB_FTDI_RANGE_010D_PID 0x010D
    +#define MTXORB_FTDI_RANGE_010E_PID 0x010E
    +#define MTXORB_FTDI_RANGE_010F_PID 0x010F
    +#define MTXORB_FTDI_RANGE_0110_PID 0x0110
    +#define MTXORB_FTDI_RANGE_0111_PID 0x0111
    +#define MTXORB_FTDI_RANGE_0112_PID 0x0112
    +#define MTXORB_FTDI_RANGE_0113_PID 0x0113
    +#define MTXORB_FTDI_RANGE_0114_PID 0x0114
    +#define MTXORB_FTDI_RANGE_0115_PID 0x0115
    +#define MTXORB_FTDI_RANGE_0116_PID 0x0116
    +#define MTXORB_FTDI_RANGE_0117_PID 0x0117
    +#define MTXORB_FTDI_RANGE_0118_PID 0x0118
    +#define MTXORB_FTDI_RANGE_0119_PID 0x0119
    +#define MTXORB_FTDI_RANGE_011A_PID 0x011A
    +#define MTXORB_FTDI_RANGE_011B_PID 0x011B
    +#define MTXORB_FTDI_RANGE_011C_PID 0x011C
    +#define MTXORB_FTDI_RANGE_011D_PID 0x011D
    +#define MTXORB_FTDI_RANGE_011E_PID 0x011E
    +#define MTXORB_FTDI_RANGE_011F_PID 0x011F
    +#define MTXORB_FTDI_RANGE_0120_PID 0x0120
    +#define MTXORB_FTDI_RANGE_0121_PID 0x0121
    +#define MTXORB_FTDI_RANGE_0122_PID 0x0122
    +#define MTXORB_FTDI_RANGE_0123_PID 0x0123
    +#define MTXORB_FTDI_RANGE_0124_PID 0x0124
    +#define MTXORB_FTDI_RANGE_0125_PID 0x0125
    +#define MTXORB_FTDI_RANGE_0126_PID 0x0126
    +#define MTXORB_FTDI_RANGE_0127_PID 0x0127
    +#define MTXORB_FTDI_RANGE_0128_PID 0x0128
    +#define MTXORB_FTDI_RANGE_0129_PID 0x0129
    +#define MTXORB_FTDI_RANGE_012A_PID 0x012A
    +#define MTXORB_FTDI_RANGE_012B_PID 0x012B
    +#define MTXORB_FTDI_RANGE_012C_PID 0x012C
    +#define MTXORB_FTDI_RANGE_012D_PID 0x012D
    +#define MTXORB_FTDI_RANGE_012E_PID 0x012E
    +#define MTXORB_FTDI_RANGE_012F_PID 0x012F
    +#define MTXORB_FTDI_RANGE_0130_PID 0x0130
    +#define MTXORB_FTDI_RANGE_0131_PID 0x0131
    +#define MTXORB_FTDI_RANGE_0132_PID 0x0132
    +#define MTXORB_FTDI_RANGE_0133_PID 0x0133
    +#define MTXORB_FTDI_RANGE_0134_PID 0x0134
    +#define MTXORB_FTDI_RANGE_0135_PID 0x0135
    +#define MTXORB_FTDI_RANGE_0136_PID 0x0136
    +#define MTXORB_FTDI_RANGE_0137_PID 0x0137
    +#define MTXORB_FTDI_RANGE_0138_PID 0x0138
    +#define MTXORB_FTDI_RANGE_0139_PID 0x0139
    +#define MTXORB_FTDI_RANGE_013A_PID 0x013A
    +#define MTXORB_FTDI_RANGE_013B_PID 0x013B
    +#define MTXORB_FTDI_RANGE_013C_PID 0x013C
    +#define MTXORB_FTDI_RANGE_013D_PID 0x013D
    +#define MTXORB_FTDI_RANGE_013E_PID 0x013E
    +#define MTXORB_FTDI_RANGE_013F_PID 0x013F
    +#define MTXORB_FTDI_RANGE_0140_PID 0x0140
    +#define MTXORB_FTDI_RANGE_0141_PID 0x0141
    +#define MTXORB_FTDI_RANGE_0142_PID 0x0142
    +#define MTXORB_FTDI_RANGE_0143_PID 0x0143
    +#define MTXORB_FTDI_RANGE_0144_PID 0x0144
    +#define MTXORB_FTDI_RANGE_0145_PID 0x0145
    +#define MTXORB_FTDI_RANGE_0146_PID 0x0146
    +#define MTXORB_FTDI_RANGE_0147_PID 0x0147
    +#define MTXORB_FTDI_RANGE_0148_PID 0x0148
    +#define MTXORB_FTDI_RANGE_0149_PID 0x0149
    +#define MTXORB_FTDI_RANGE_014A_PID 0x014A
    +#define MTXORB_FTDI_RANGE_014B_PID 0x014B
    +#define MTXORB_FTDI_RANGE_014C_PID 0x014C
    +#define MTXORB_FTDI_RANGE_014D_PID 0x014D
    +#define MTXORB_FTDI_RANGE_014E_PID 0x014E
    +#define MTXORB_FTDI_RANGE_014F_PID 0x014F
    +#define MTXORB_FTDI_RANGE_0150_PID 0x0150
    +#define MTXORB_FTDI_RANGE_0151_PID 0x0151
    +#define MTXORB_FTDI_RANGE_0152_PID 0x0152
    +#define MTXORB_FTDI_RANGE_0153_PID 0x0153
    +#define MTXORB_FTDI_RANGE_0154_PID 0x0154
    +#define MTXORB_FTDI_RANGE_0155_PID 0x0155
    +#define MTXORB_FTDI_RANGE_0156_PID 0x0156
    +#define MTXORB_FTDI_RANGE_0157_PID 0x0157
    +#define MTXORB_FTDI_RANGE_0158_PID 0x0158
    +#define MTXORB_FTDI_RANGE_0159_PID 0x0159
    +#define MTXORB_FTDI_RANGE_015A_PID 0x015A
    +#define MTXORB_FTDI_RANGE_015B_PID 0x015B
    +#define MTXORB_FTDI_RANGE_015C_PID 0x015C
    +#define MTXORB_FTDI_RANGE_015D_PID 0x015D
    +#define MTXORB_FTDI_RANGE_015E_PID 0x015E
    +#define MTXORB_FTDI_RANGE_015F_PID 0x015F
    +#define MTXORB_FTDI_RANGE_0160_PID 0x0160
    +#define MTXORB_FTDI_RANGE_0161_PID 0x0161
    +#define MTXORB_FTDI_RANGE_0162_PID 0x0162
    +#define MTXORB_FTDI_RANGE_0163_PID 0x0163
    +#define MTXORB_FTDI_RANGE_0164_PID 0x0164
    +#define MTXORB_FTDI_RANGE_0165_PID 0x0165
    +#define MTXORB_FTDI_RANGE_0166_PID 0x0166
    +#define MTXORB_FTDI_RANGE_0167_PID 0x0167
    +#define MTXORB_FTDI_RANGE_0168_PID 0x0168
    +#define MTXORB_FTDI_RANGE_0169_PID 0x0169
    +#define MTXORB_FTDI_RANGE_016A_PID 0x016A
    +#define MTXORB_FTDI_RANGE_016B_PID 0x016B
    +#define MTXORB_FTDI_RANGE_016C_PID 0x016C
    +#define MTXORB_FTDI_RANGE_016D_PID 0x016D
    +#define MTXORB_FTDI_RANGE_016E_PID 0x016E
    +#define MTXORB_FTDI_RANGE_016F_PID 0x016F
    +#define MTXORB_FTDI_RANGE_0170_PID 0x0170
    +#define MTXORB_FTDI_RANGE_0171_PID 0x0171
    +#define MTXORB_FTDI_RANGE_0172_PID 0x0172
    +#define MTXORB_FTDI_RANGE_0173_PID 0x0173
    +#define MTXORB_FTDI_RANGE_0174_PID 0x0174
    +#define MTXORB_FTDI_RANGE_0175_PID 0x0175
    +#define MTXORB_FTDI_RANGE_0176_PID 0x0176
    +#define MTXORB_FTDI_RANGE_0177_PID 0x0177
    +#define MTXORB_FTDI_RANGE_0178_PID 0x0178
    +#define MTXORB_FTDI_RANGE_0179_PID 0x0179
    +#define MTXORB_FTDI_RANGE_017A_PID 0x017A
    +#define MTXORB_FTDI_RANGE_017B_PID 0x017B
    +#define MTXORB_FTDI_RANGE_017C_PID 0x017C
    +#define MTXORB_FTDI_RANGE_017D_PID 0x017D
    +#define MTXORB_FTDI_RANGE_017E_PID 0x017E
    +#define MTXORB_FTDI_RANGE_017F_PID 0x017F
    +#define MTXORB_FTDI_RANGE_0180_PID 0x0180
    +#define MTXORB_FTDI_RANGE_0181_PID 0x0181
    +#define MTXORB_FTDI_RANGE_0182_PID 0x0182
    +#define MTXORB_FTDI_RANGE_0183_PID 0x0183
    +#define MTXORB_FTDI_RANGE_0184_PID 0x0184
    +#define MTXORB_FTDI_RANGE_0185_PID 0x0185
    +#define MTXORB_FTDI_RANGE_0186_PID 0x0186
    +#define MTXORB_FTDI_RANGE_0187_PID 0x0187
    +#define MTXORB_FTDI_RANGE_0188_PID 0x0188
    +#define MTXORB_FTDI_RANGE_0189_PID 0x0189
    +#define MTXORB_FTDI_RANGE_018A_PID 0x018A
    +#define MTXORB_FTDI_RANGE_018B_PID 0x018B
    +#define MTXORB_FTDI_RANGE_018C_PID 0x018C
    +#define MTXORB_FTDI_RANGE_018D_PID 0x018D
    +#define MTXORB_FTDI_RANGE_018E_PID 0x018E
    +#define MTXORB_FTDI_RANGE_018F_PID 0x018F
    +#define MTXORB_FTDI_RANGE_0190_PID 0x0190
    +#define MTXORB_FTDI_RANGE_0191_PID 0x0191
    +#define MTXORB_FTDI_RANGE_0192_PID 0x0192
    +#define MTXORB_FTDI_RANGE_0193_PID 0x0193
    +#define MTXORB_FTDI_RANGE_0194_PID 0x0194
    +#define MTXORB_FTDI_RANGE_0195_PID 0x0195
    +#define MTXORB_FTDI_RANGE_0196_PID 0x0196
    +#define MTXORB_FTDI_RANGE_0197_PID 0x0197
    +#define MTXORB_FTDI_RANGE_0198_PID 0x0198
    +#define MTXORB_FTDI_RANGE_0199_PID 0x0199
    +#define MTXORB_FTDI_RANGE_019A_PID 0x019A
    +#define MTXORB_FTDI_RANGE_019B_PID 0x019B
    +#define MTXORB_FTDI_RANGE_019C_PID 0x019C
    +#define MTXORB_FTDI_RANGE_019D_PID 0x019D
    +#define MTXORB_FTDI_RANGE_019E_PID 0x019E
    +#define MTXORB_FTDI_RANGE_019F_PID 0x019F
    +#define MTXORB_FTDI_RANGE_01A0_PID 0x01A0
    +#define MTXORB_FTDI_RANGE_01A1_PID 0x01A1
    +#define MTXORB_FTDI_RANGE_01A2_PID 0x01A2
    +#define MTXORB_FTDI_RANGE_01A3_PID 0x01A3
    +#define MTXORB_FTDI_RANGE_01A4_PID 0x01A4
    +#define MTXORB_FTDI_RANGE_01A5_PID 0x01A5
    +#define MTXORB_FTDI_RANGE_01A6_PID 0x01A6
    +#define MTXORB_FTDI_RANGE_01A7_PID 0x01A7
    +#define MTXORB_FTDI_RANGE_01A8_PID 0x01A8
    +#define MTXORB_FTDI_RANGE_01A9_PID 0x01A9
    +#define MTXORB_FTDI_RANGE_01AA_PID 0x01AA
    +#define MTXORB_FTDI_RANGE_01AB_PID 0x01AB
    +#define MTXORB_FTDI_RANGE_01AC_PID 0x01AC
    +#define MTXORB_FTDI_RANGE_01AD_PID 0x01AD
    +#define MTXORB_FTDI_RANGE_01AE_PID 0x01AE
    +#define MTXORB_FTDI_RANGE_01AF_PID 0x01AF
    +#define MTXORB_FTDI_RANGE_01B0_PID 0x01B0
    +#define MTXORB_FTDI_RANGE_01B1_PID 0x01B1
    +#define MTXORB_FTDI_RANGE_01B2_PID 0x01B2
    +#define MTXORB_FTDI_RANGE_01B3_PID 0x01B3
    +#define MTXORB_FTDI_RANGE_01B4_PID 0x01B4
    +#define MTXORB_FTDI_RANGE_01B5_PID 0x01B5
    +#define MTXORB_FTDI_RANGE_01B6_PID 0x01B6
    +#define MTXORB_FTDI_RANGE_01B7_PID 0x01B7
    +#define MTXORB_FTDI_RANGE_01B8_PID 0x01B8
    +#define MTXORB_FTDI_RANGE_01B9_PID 0x01B9
    +#define MTXORB_FTDI_RANGE_01BA_PID 0x01BA
    +#define MTXORB_FTDI_RANGE_01BB_PID 0x01BB
    +#define MTXORB_FTDI_RANGE_01BC_PID 0x01BC
    +#define MTXORB_FTDI_RANGE_01BD_PID 0x01BD
    +#define MTXORB_FTDI_RANGE_01BE_PID 0x01BE
    +#define MTXORB_FTDI_RANGE_01BF_PID 0x01BF
    +#define MTXORB_FTDI_RANGE_01C0_PID 0x01C0
    +#define MTXORB_FTDI_RANGE_01C1_PID 0x01C1
    +#define MTXORB_FTDI_RANGE_01C2_PID 0x01C2
    +#define MTXORB_FTDI_RANGE_01C3_PID 0x01C3
    +#define MTXORB_FTDI_RANGE_01C4_PID 0x01C4
    +#define MTXORB_FTDI_RANGE_01C5_PID 0x01C5
    +#define MTXORB_FTDI_RANGE_01C6_PID 0x01C6
    +#define MTXORB_FTDI_RANGE_01C7_PID 0x01C7
    +#define MTXORB_FTDI_RANGE_01C8_PID 0x01C8
    +#define MTXORB_FTDI_RANGE_01C9_PID 0x01C9
    +#define MTXORB_FTDI_RANGE_01CA_PID 0x01CA
    +#define MTXORB_FTDI_RANGE_01CB_PID 0x01CB
    +#define MTXORB_FTDI_RANGE_01CC_PID 0x01CC
    +#define MTXORB_FTDI_RANGE_01CD_PID 0x01CD
    +#define MTXORB_FTDI_RANGE_01CE_PID 0x01CE
    +#define MTXORB_FTDI_RANGE_01CF_PID 0x01CF
    +#define MTXORB_FTDI_RANGE_01D0_PID 0x01D0
    +#define MTXORB_FTDI_RANGE_01D1_PID 0x01D1
    +#define MTXORB_FTDI_RANGE_01D2_PID 0x01D2
    +#define MTXORB_FTDI_RANGE_01D3_PID 0x01D3
    +#define MTXORB_FTDI_RANGE_01D4_PID 0x01D4
    +#define MTXORB_FTDI_RANGE_01D5_PID 0x01D5
    +#define MTXORB_FTDI_RANGE_01D6_PID 0x01D6
    +#define MTXORB_FTDI_RANGE_01D7_PID 0x01D7
    +#define MTXORB_FTDI_RANGE_01D8_PID 0x01D8
    +#define MTXORB_FTDI_RANGE_01D9_PID 0x01D9
    +#define MTXORB_FTDI_RANGE_01DA_PID 0x01DA
    +#define MTXORB_FTDI_RANGE_01DB_PID 0x01DB
    +#define MTXORB_FTDI_RANGE_01DC_PID 0x01DC
    +#define MTXORB_FTDI_RANGE_01DD_PID 0x01DD
    +#define MTXORB_FTDI_RANGE_01DE_PID 0x01DE
    +#define MTXORB_FTDI_RANGE_01DF_PID 0x01DF
    +#define MTXORB_FTDI_RANGE_01E0_PID 0x01E0
    +#define MTXORB_FTDI_RANGE_01E1_PID 0x01E1
    +#define MTXORB_FTDI_RANGE_01E2_PID 0x01E2
    +#define MTXORB_FTDI_RANGE_01E3_PID 0x01E3
    +#define MTXORB_FTDI_RANGE_01E4_PID 0x01E4
    +#define MTXORB_FTDI_RANGE_01E5_PID 0x01E5
    +#define MTXORB_FTDI_RANGE_01E6_PID 0x01E6
    +#define MTXORB_FTDI_RANGE_01E7_PID 0x01E7
    +#define MTXORB_FTDI_RANGE_01E8_PID 0x01E8
    +#define MTXORB_FTDI_RANGE_01E9_PID 0x01E9
    +#define MTXORB_FTDI_RANGE_01EA_PID 0x01EA
    +#define MTXORB_FTDI_RANGE_01EB_PID 0x01EB
    +#define MTXORB_FTDI_RANGE_01EC_PID 0x01EC
    +#define MTXORB_FTDI_RANGE_01ED_PID 0x01ED
    +#define MTXORB_FTDI_RANGE_01EE_PID 0x01EE
    +#define MTXORB_FTDI_RANGE_01EF_PID 0x01EF
    +#define MTXORB_FTDI_RANGE_01F0_PID 0x01F0
    +#define MTXORB_FTDI_RANGE_01F1_PID 0x01F1
    +#define MTXORB_FTDI_RANGE_01F2_PID 0x01F2
    +#define MTXORB_FTDI_RANGE_01F3_PID 0x01F3
    +#define MTXORB_FTDI_RANGE_01F4_PID 0x01F4
    +#define MTXORB_FTDI_RANGE_01F5_PID 0x01F5
    +#define MTXORB_FTDI_RANGE_01F6_PID 0x01F6
    +#define MTXORB_FTDI_RANGE_01F7_PID 0x01F7
    +#define MTXORB_FTDI_RANGE_01F8_PID 0x01F8
    +#define MTXORB_FTDI_RANGE_01F9_PID 0x01F9
    +#define MTXORB_FTDI_RANGE_01FA_PID 0x01FA
    +#define MTXORB_FTDI_RANGE_01FB_PID 0x01FB
    +#define MTXORB_FTDI_RANGE_01FC_PID 0x01FC
    +#define MTXORB_FTDI_RANGE_01FD_PID 0x01FD
    +#define MTXORB_FTDI_RANGE_01FE_PID 0x01FE
    +#define MTXORB_FTDI_RANGE_01FF_PID 0x01FF
    +
    +
    +
    +/* Interbiometrics USB I/O Board */
    +/* Developed for Interbiometrics by Rudolf Gugler */
    +#define INTERBIOMETRICS_VID 0x1209
    +#define INTERBIOMETRICS_IOBOARD_PID 0x1002
    +#define INTERBIOMETRICS_MINI_IOBOARD_PID 0x1006
    +
    +/*
    + * The following are the values for the Perle Systems
    + * UltraPort USB serial converters
    + */
    +#define FTDI_PERLE_ULTRAPORT_PID 0xF0C0 /* Perle UltraPort Product Id */
    +
    +/*
    + * The following are the values for the Sealevel SeaLINK+ adapters.
    + * (Original list sent by Tuan Hoang. Ian Abbott renamed the macros and
    + * removed some PIDs that don't seem to match any existing products.)
    + */
    +#define SEALEVEL_VID 0x0c52 /* Sealevel Vendor ID */
    +#define SEALEVEL_2101_PID 0x2101 /* SeaLINK+232 (2101/2105) */
    +#define SEALEVEL_2102_PID 0x2102 /* SeaLINK+485 (2102) */
    +#define SEALEVEL_2103_PID 0x2103 /* SeaLINK+232I (2103) */
    +#define SEALEVEL_2104_PID 0x2104 /* SeaLINK+485I (2104) */
    +#define SEALEVEL_2106_PID 0x9020 /* SeaLINK+422 (2106) */
    +#define SEALEVEL_2201_1_PID 0x2211 /* SeaPORT+2/232 (2201) Port 1 */
    +#define SEALEVEL_2201_2_PID 0x2221 /* SeaPORT+2/232 (2201) Port 2 */
    +#define SEALEVEL_2202_1_PID 0x2212 /* SeaPORT+2/485 (2202) Port 1 */
    +#define SEALEVEL_2202_2_PID 0x2222 /* SeaPORT+2/485 (2202) Port 2 */
    +#define SEALEVEL_2203_1_PID 0x2213 /* SeaPORT+2 (2203) Port 1 */
    +#define SEALEVEL_2203_2_PID 0x2223 /* SeaPORT+2 (2203) Port 2 */
    +#define SEALEVEL_2401_1_PID 0x2411 /* SeaPORT+4/232 (2401) Port 1 */
    +#define SEALEVEL_2401_2_PID 0x2421 /* SeaPORT+4/232 (2401) Port 2 */
    +#define SEALEVEL_2401_3_PID 0x2431 /* SeaPORT+4/232 (2401) Port 3 */
    +#define SEALEVEL_2401_4_PID 0x2441 /* SeaPORT+4/232 (2401) Port 4 */
    +#define SEALEVEL_2402_1_PID 0x2412 /* SeaPORT+4/485 (2402) Port 1 */
    +#define SEALEVEL_2402_2_PID 0x2422 /* SeaPORT+4/485 (2402) Port 2 */
    +#define SEALEVEL_2402_3_PID 0x2432 /* SeaPORT+4/485 (2402) Port 3 */
    +#define SEALEVEL_2402_4_PID 0x2442 /* SeaPORT+4/485 (2402) Port 4 */
    +#define SEALEVEL_2403_1_PID 0x2413 /* SeaPORT+4 (2403) Port 1 */
    +#define SEALEVEL_2403_2_PID 0x2423 /* SeaPORT+4 (2403) Port 2 */
    +#define SEALEVEL_2403_3_PID 0x2433 /* SeaPORT+4 (2403) Port 3 */
    +#define SEALEVEL_2403_4_PID 0x2443 /* SeaPORT+4 (2403) Port 4 */
    +#define SEALEVEL_2801_1_PID 0X2811 /* SeaLINK+8/232 (2801) Port 1 */
    +#define SEALEVEL_2801_2_PID 0X2821 /* SeaLINK+8/232 (2801) Port 2 */
    +#define SEALEVEL_2801_3_PID 0X2831 /* SeaLINK+8/232 (2801) Port 3 */
    +#define SEALEVEL_2801_4_PID 0X2841 /* SeaLINK+8/232 (2801) Port 4 */
    +#define SEALEVEL_2801_5_PID 0X2851 /* SeaLINK+8/232 (2801) Port 5 */
    +#define SEALEVEL_2801_6_PID 0X2861 /* SeaLINK+8/232 (2801) Port 6 */
    +#define SEALEVEL_2801_7_PID 0X2871 /* SeaLINK+8/232 (2801) Port 7 */
    +#define SEALEVEL_2801_8_PID 0X2881 /* SeaLINK+8/232 (2801) Port 8 */
    +#define SEALEVEL_2802_1_PID 0X2812 /* SeaLINK+8/485 (2802) Port 1 */
    +#define SEALEVEL_2802_2_PID 0X2822 /* SeaLINK+8/485 (2802) Port 2 */
    +#define SEALEVEL_2802_3_PID 0X2832 /* SeaLINK+8/485 (2802) Port 3 */
    +#define SEALEVEL_2802_4_PID 0X2842 /* SeaLINK+8/485 (2802) Port 4 */
    +#define SEALEVEL_2802_5_PID 0X2852 /* SeaLINK+8/485 (2802) Port 5 */
    +#define SEALEVEL_2802_6_PID 0X2862 /* SeaLINK+8/485 (2802) Port 6 */
    +#define SEALEVEL_2802_7_PID 0X2872 /* SeaLINK+8/485 (2802) Port 7 */
    +#define SEALEVEL_2802_8_PID 0X2882 /* SeaLINK+8/485 (2802) Port 8 */
    +#define SEALEVEL_2803_1_PID 0X2813 /* SeaLINK+8 (2803) Port 1 */
    +#define SEALEVEL_2803_2_PID 0X2823 /* SeaLINK+8 (2803) Port 2 */
    +#define SEALEVEL_2803_3_PID 0X2833 /* SeaLINK+8 (2803) Port 3 */
    +#define SEALEVEL_2803_4_PID 0X2843 /* SeaLINK+8 (2803) Port 4 */
    +#define SEALEVEL_2803_5_PID 0X2853 /* SeaLINK+8 (2803) Port 5 */
    +#define SEALEVEL_2803_6_PID 0X2863 /* SeaLINK+8 (2803) Port 6 */
    +#define SEALEVEL_2803_7_PID 0X2873 /* SeaLINK+8 (2803) Port 7 */
    +#define SEALEVEL_2803_8_PID 0X2883 /* SeaLINK+8 (2803) Port 8 */
    +
    +/*
    + * The following are the values for two KOBIL chipcard terminals.
    + */
    +#define KOBIL_VID 0x0d46 /* KOBIL Vendor ID */
    +#define KOBIL_CONV_B1_PID 0x2020 /* KOBIL Konverter for B1 */
    +#define KOBIL_CONV_KAAN_PID 0x2021 /* KOBIL_Konverter for KAAN */
    +
    +/*
    + * Icom ID-1 digital transceiver
    + */
    +
    +#define ICOM_ID1_VID 0x0C26
    +#define ICOM_ID1_PID 0x0004
    +
    +/*
    + * ASK.fr devices
    + */
    +#define FTDI_ASK_RDR400_PID 0xC991 /* ASK RDR 400 series card reader */
    +
    +/*
    + * FTDI USB UART chips used in construction projects from the
    + * Elektor Electronics magazine (http://elektor-electronics.co.uk)
    + */
    +#define ELEKTOR_VID 0x0C7D
    +#define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */
    +
    +/*
    + * DSS-20 Sync Station for Sony Ericsson P800
    + */
    +#define FTDI_DSS20_PID 0xFC82
    +
    +/*
    + * Home Electronics (www.home-electro.com) USB gadgets
    + */
    +#define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */
    +
    +/* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */
    +/* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */
    +#define FTDI_USB_UIRT_PID 0xF850 /* Product Id */
    +
    +/* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */
    +
    +#define FTDI_TNC_X_PID 0xEBE0
    +
    +/*
    + * ELV USB devices submitted by Christian Abt of ELV (www.elv.de).
    + * All of these devices use FTDI's vendor ID (0x0403).
    + *
    + * The previously included PID for the UO 100 module was incorrect.
    + * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58).
    + *
    + * Armin Laeuger originally sent the PID for the UM 100 module.
    + */
    +#define FTDI_R2000KU_TRUE_RNG 0xFB80 /* R2000KU TRUE RNG */
    +#define FTDI_ELV_UR100_PID 0xFB58 /* USB-RS232-Umsetzer (UR 100) */
    +#define FTDI_ELV_UM100_PID 0xFB5A /* USB-Modul UM 100 */
    +#define FTDI_ELV_UO100_PID 0xFB5B /* USB-Modul UO 100 */
    +#define FTDI_ELV_ALC8500_PID 0xF06E /* ALC 8500 Expert */
    +/* Additional ELV PIDs that default to using the FTDI D2XX drivers on
    + * MS Windows, rather than the FTDI Virtual Com Port drivers.
    + * Maybe these will be easier to use with the libftdi/libusb user-space
    + * drivers, or possibly the Comedi drivers in some cases. */
    +#define FTDI_ELV_CLI7000_PID 0xFB59 /* Computer-Light-Interface (CLI 7000) */
    +#define FTDI_ELV_PPS7330_PID 0xFB5C /* Processor-Power-Supply (PPS 7330) */
    +#define FTDI_ELV_TFM100_PID 0xFB5D /* Temperartur-Feuchte Messgeraet (TFM 100) */
    +#define FTDI_ELV_UDF77_PID 0xFB5E /* USB DCF Funkurh (UDF 77) */
    +#define FTDI_ELV_UIO88_PID 0xFB5F /* USB-I/O Interface (UIO 88) */
    +#define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */
    +#define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */
    +#define FTDI_ELV_USI2_PID 0xF06A /* USB-Schrittmotoren-Interface (USI 2) */
    +#define FTDI_ELV_T1100_PID 0xF06B /* Thermometer (T 1100) */
    +#define FTDI_ELV_PCD200_PID 0xF06C /* PC-Datenlogger (PCD 200) */
    +#define FTDI_ELV_ULA200_PID 0xF06D /* USB-LCD-Ansteuerung (ULA 200) */
    +#define FTDI_ELV_FHZ1000PC_PID 0xF06F /* FHZ 1000 PC */
    +#define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */
    +#define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */
    +#define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */
    +#define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */
    +#define FTDI_ELV_FS20SIG_PID 0xE0F4 /* Signalgeber (FS 20 SIG) */
    +#define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */
    +#define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */
    +#define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */
    +#define FTDI_ELV_HS485_PID 0xE0EA /* USB to RS-485 adapter */
    +#define FTDI_ELV_EM1010PC_PID 0xE0EF /* Engery monitor EM 1010 PC */
    +#define FTDI_PHI_FISCO_PID 0xE40B /* PHI Fisco USB to Serial cable */
    +
    +/*
    + * Definitions for ID TECH (www.idt-net.com) devices
    + */
    +#define IDTECH_VID 0x0ACD /* ID TECH Vendor ID */
    +#define IDTECH_IDT1221U_PID 0x0300 /* IDT1221U USB to RS-232 adapter */
    +
    +/*
    + * Definitions for Omnidirectional Control Technology, Inc. devices
    + */
    +#define OCT_VID 0x0B39 /* OCT vendor ID */
    +/* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */
    +/* Also rebadged as Dick Smith Electronics (Aus) XH6451 */
    +/* Also rebadged as SIIG Inc. model US2308 hardware version 1 */
    +#define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */
    +
    +/* an infrared receiver for user access control with IR tags */
    +#define FTDI_PIEGROUP_PID 0xF208 /* Product Id */
    +
    +/*
    + * Definitions for Artemis astronomical USB based cameras
    + * Check it at http://www.artemisccd.co.uk/
    + */
    +#define FTDI_ARTEMIS_PID 0xDF28 /* All Artemis Cameras */
    +
    +/*
    + * Definitions for ATIK Instruments astronomical USB based cameras
    + * Check it at http://www.atik-instruments.com/
    + */
    +#define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Grayscale Camera */
    +#define FTDI_ATIK_ATK16C_PID 0xDF32 /* ATIK ATK-16C Colour Camera */
    +#define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Grayscale Camera */
    +#define FTDI_ATIK_ATK16HRC_PID 0xDF33 /* ATIK ATK-16HRC Colour Camera */
    +#define FTDI_ATIK_ATK16IC_PID 0xDF35 /* ATIK ATK-16IC Grayscale Camera */
    +
    +/*
    + * Protego product ids
    + */
    +#define PROTEGO_SPECIAL_1 0xFC70 /* special/unknown device */
    +#define PROTEGO_R2X0 0xFC71 /* R200-USB TRNG unit (R210, R220, and R230) */
    +#define PROTEGO_SPECIAL_3 0xFC72 /* special/unknown device */
    +#define PROTEGO_SPECIAL_4 0xFC73 /* special/unknown device */
    +
    +/*
    + * Gude Analog- und Digitalsysteme GmbH
    + */
    +#define FTDI_GUDEADS_E808_PID 0xE808
    +#define FTDI_GUDEADS_E809_PID 0xE809
    +#define FTDI_GUDEADS_E80A_PID 0xE80A
    +#define FTDI_GUDEADS_E80B_PID 0xE80B
    +#define FTDI_GUDEADS_E80C_PID 0xE80C
    +#define FTDI_GUDEADS_E80D_PID 0xE80D
    +#define FTDI_GUDEADS_E80E_PID 0xE80E
    +#define FTDI_GUDEADS_E80F_PID 0xE80F
    +#define FTDI_GUDEADS_E888_PID 0xE888 /* Expert ISDN Control USB */
    +#define FTDI_GUDEADS_E889_PID 0xE889 /* USB RS-232 OptoBridge */
    +#define FTDI_GUDEADS_E88A_PID 0xE88A
    +#define FTDI_GUDEADS_E88B_PID 0xE88B
    +#define FTDI_GUDEADS_E88C_PID 0xE88C
    +#define FTDI_GUDEADS_E88D_PID 0xE88D
    +#define FTDI_GUDEADS_E88E_PID 0xE88E
    +#define FTDI_GUDEADS_E88F_PID 0xE88F
    +
    +/*
    + * Linx Technologies product ids
    + */
    +#define LINX_SDMUSBQSS_PID 0xF448 /* Linx SDM-USB-QS-S */
    +#define LINX_MASTERDEVEL2_PID 0xF449 /* Linx Master Development 2.0 */
    +#define LINX_FUTURE_0_PID 0xF44A /* Linx future device */
    +#define LINX_FUTURE_1_PID 0xF44B /* Linx future device */
    +#define LINX_FUTURE_2_PID 0xF44C /* Linx future device */
    +
    +/* CCS Inc. ICDU/ICDU40 product ID - the FT232BM is used in an in-circuit-debugger */
    +/* unit for PIC16's/PIC18's */
    +#define FTDI_CCSICDU20_0_PID 0xF9D0
    +#define FTDI_CCSICDU40_1_PID 0xF9D1
    +#define FTDI_CCSMACHX_2_PID 0xF9D2
    +#define FTDI_CCSLOAD_N_GO_3_PID 0xF9D3
    +#define FTDI_CCSICDU64_4_PID 0xF9D4
    +#define FTDI_CCSPRIME8_5_PID 0xF9D5
    +
    +/* Inside Accesso contactless reader (http://www.insidefr.com) */
    +#define INSIDE_ACCESSO 0xFAD0
    +
    +/*
    + * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI
    + */
    +#define INTREPID_VID 0x093C
    +#define INTREPID_VALUECAN_PID 0x0601
    +#define INTREPID_NEOVI_PID 0x0701
    +
    +/*
    + * Falcom Wireless Communications GmbH
    + */
    +#define FALCOM_VID 0x0F94 /* Vendor Id */
    +#define FALCOM_TWIST_PID 0x0001 /* Falcom Twist USB GPRS modem */
    +#define FALCOM_SAMBA_PID 0x0005 /* Falcom Samba USB GPRS modem */
    +
    +/*
    + * SUUNTO product ids
    + */
    +#define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */
    +
    +/*
    + * Oceanic product ids
    + */
    +#define FTDI_OCEANIC_PID 0xF460 /* Oceanic dive instrument */
    +
    +/*
    + * TTi (Thurlby Thandar Instruments)
    + */
    +#define TTI_VID 0x103E /* Vendor Id */
    +#define TTI_QL355P_PID 0x03E8 /* TTi QL355P power supply */
    +
    +/*
    + * Definitions for B&B Electronics products.
    + */
    +#define BANDB_VID 0x0856 /* B&B Electronics Vendor ID */
    +#define BANDB_USOTL4_PID 0xAC01 /* USOTL4 Isolated RS-485 Converter */
    +#define BANDB_USTL4_PID 0xAC02 /* USTL4 RS-485 Converter */
    +#define BANDB_USO9ML2_PID 0xAC03 /* USO9ML2 Isolated RS-232 Converter */
    +#define BANDB_USOPTL4_PID 0xAC11
    +#define BANDB_USPTL4_PID 0xAC12
    +#define BANDB_USO9ML2DR_2_PID 0xAC16
    +#define BANDB_USO9ML2DR_PID 0xAC17
    +#define BANDB_USOPTL4DR2_PID 0xAC18 /* USOPTL4R-2 2-port Isolated RS-232 Converter */
    +#define BANDB_USOPTL4DR_PID 0xAC19
    +#define BANDB_485USB9F_2W_PID 0xAC25
    +#define BANDB_485USB9F_4W_PID 0xAC26
    +#define BANDB_232USB9M_PID 0xAC27
    +#define BANDB_485USBTB_2W_PID 0xAC33
    +#define BANDB_485USBTB_4W_PID 0xAC34
    +#define BANDB_TTL5USB9M_PID 0xAC49
    +#define BANDB_TTL3USB9M_PID 0xAC50
    +#define BANDB_ZZ_PROG1_USB_PID 0xBA02
    +
    +/*
    + * RM Michaelides CANview USB (http://www.rmcan.com)
    + * CAN fieldbus interface adapter, added by port GmbH www.port.de)
    + * Ian Abbott changed the macro names for consistency.
    + */
    +#define FTDI_RM_CANVIEW_PID 0xfd60 /* Product Id */
    +
    +/*
    + * EVER Eco Pro UPS (http://www.ever.com.pl/)
    + */
    +
    +#define EVER_ECO_PRO_CDS 0xe520 /* RS-232 converter */
    +
    +/*
    + * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485,
    + * USB-TTY activ, USB-TTY passiv. Some PIDs are used by several devices
    + * and I'm not entirely sure which are used by which.
    + */
    +#define FTDI_4N_GALAXY_DE_1_PID 0xF3C0
    +#define FTDI_4N_GALAXY_DE_2_PID 0xF3C1
    +
    +/*
    + * Mobility Electronics products.
    + */
    +#define MOBILITY_VID 0x1342
    +#define MOBILITY_USB_SERIAL_PID 0x0202 /* EasiDock USB 200 serial */
    +
    +/*
    + * microHAM product IDs (http://www.microham.com).
    + * Submitted by Justin Burket (KL1RL) <zorton@jtan.com>
    + * and Mike Studer (K6EEP) <k6eep@hamsoftware.org>.
    + * Ian Abbott <abbotti@mev.co.uk> added a few more from the driver INF file.
    + */
    +#define FTDI_MHAM_KW_PID 0xEEE8 /* USB-KW interface */
    +#define FTDI_MHAM_YS_PID 0xEEE9 /* USB-YS interface */
    +#define FTDI_MHAM_Y6_PID 0xEEEA /* USB-Y6 interface */
    +#define FTDI_MHAM_Y8_PID 0xEEEB /* USB-Y8 interface */
    +#define FTDI_MHAM_IC_PID 0xEEEC /* USB-IC interface */
    +#define FTDI_MHAM_DB9_PID 0xEEED /* USB-DB9 interface */
    +#define FTDI_MHAM_RS232_PID 0xEEEE /* USB-RS232 interface */
    +#define FTDI_MHAM_Y9_PID 0xEEEF /* USB-Y9 interface */
    +
    +/*
    + * Active Robots product ids.
    + */
    +#define FTDI_ACTIVE_ROBOTS_PID 0xE548 /* USB comms board */
    +
    +/*
    + * Xsens Technologies BV products (http://www.xsens.com).
    + */
    +#define XSENS_CONVERTER_0_PID 0xD388
    +#define XSENS_CONVERTER_1_PID 0xD389
    +#define XSENS_CONVERTER_2_PID 0xD38A
    +#define XSENS_CONVERTER_3_PID 0xD38B
    +#define XSENS_CONVERTER_4_PID 0xD38C
    +#define XSENS_CONVERTER_5_PID 0xD38D
    +#define XSENS_CONVERTER_6_PID 0xD38E
    +#define XSENS_CONVERTER_7_PID 0xD38F
    +
    +/*
    + * Teratronik product ids.
    + * Submitted by O. Wölfelschneider.
    + */
    +#define FTDI_TERATRONIK_VCP_PID 0xEC88 /* Teratronik device (preferring VCP driver on windows) */
    +#define FTDI_TERATRONIK_D2XX_PID 0xEC89 /* Teratronik device (preferring D2XX driver on windows) */
    +
    +/*
    + * Evolution Robotics products (http://www.evolution.com/).
    + * Submitted by Shawn M. Lavelle.
    + */
    +#define EVOLUTION_VID 0xDEEE /* Vendor ID */
    +#define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */
    +#define EVO_8U232AM_PID 0x02FF /* Evolution robotics RCM2 (FT232AM)*/
    +#define EVO_HYBRID_PID 0x0302 /* Evolution robotics RCM4 PID (FT232BM)*/
    +#define EVO_RCM4_PID 0x0303 /* Evolution robotics RCM4 PID */
    +
    +/* Pyramid Computer GmbH */
    +#define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */
    +
    +/*
    + * NDI (www.ndigital.com) product ids
    + */
    +#define FTDI_NDI_HUC_PID 0xDA70 /* NDI Host USB Converter */
    +#define FTDI_NDI_SPECTRA_SCU_PID 0xDA71 /* NDI Spectra SCU */
    +#define FTDI_NDI_FUTURE_2_PID 0xDA72 /* NDI future device #2 */
    +#define FTDI_NDI_FUTURE_3_PID 0xDA73 /* NDI future device #3 */
    +#define FTDI_NDI_AURORA_SCU_PID 0xDA74 /* NDI Aurora SCU */
    +
    +/*
    + * Posiflex inc retail equipment (http://www.posiflex.com.tw)
    + */
    +#define POSIFLEX_VID 0x0d3a /* Vendor ID */
    +#define POSIFLEX_PP7000_PID 0x0300 /* PP-7000II thermal printer */
    +
    +/*
    + * Westrex International devices submitted by Cory Lee
    + */
    +#define FTDI_WESTREX_MODEL_777_PID 0xDC00 /* Model 777 */
    +#define FTDI_WESTREX_MODEL_8900F_PID 0xDC01 /* Model 8900F */
    +
    +/*
    + * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com)
    + */
    +#define FTDI_RRCIRKITS_LOCOBUFFER_PID 0xc7d0 /* LocoBuffer USB */
    +
    +/*
    + * Eclo (http://www.eclo.pt/) product IDs.
    + * PID 0xEA90 submitted by Martin Grill.
    + */
    +#define FTDI_ECLO_COM_1WIRE_PID 0xEA90 /* COM to 1-Wire USB adaptor */
    +
    +/*
    + * Papouch products (http://www.papouch.com/)
    + * Submitted by Folkert van Heusden
    + */
    +
    +#define PAPOUCH_VID 0x5050 /* Vendor ID */
    +#define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */
    +#define PAPOUCH_QUIDO4x4_PID 0x0900 /* Quido 4/4 Module */
    +
    +/*
    + * ACG Identification Technologies GmbH products (http://www.acg.de/).
    + * Submitted by anton -at- goto10 -dot- org.
    + */
    +#define FTDI_ACG_HFDUAL_PID 0xDD20 /* HF Dual ISO Reader (RFID) */
    +
    +/*
    + * Yost Engineering, Inc. products (www.yostengineering.com).
    + * PID 0xE050 submitted by Aaron Prose.
    + */
    +#define FTDI_YEI_SERVOCENTER31_PID 0xE050 /* YEI ServoCenter3.1 USB */
    +
    +/*
    + * ThorLabs USB motor drivers
    + */
    +#define FTDI_THORLABS_PID 0xfaf0 /* ThorLabs USB motor drivers */
    +
    +/*
    + * Testo products (http://www.testo.com/)
    + * Submitted by Colin Leroy
    + */
    +#define TESTO_VID 0x128D
    +#define TESTO_USB_INTERFACE_PID 0x0001
    +
    +/*
    + * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com.
    + */
    +#define FTDI_GAMMA_SCOUT_PID 0xD678 /* Gamma Scout online */
    +
    +/*
    + * Tactrix OpenPort (ECU) devices.
    + * OpenPort 1.3M submitted by Donour Sizemore.
    + * OpenPort 1.3S and 1.3U submitted by Ian Abbott.
    + */
    +#define FTDI_TACTRIX_OPENPORT_13M_PID 0xCC48 /* OpenPort 1.3 Mitsubishi */
    +#define FTDI_TACTRIX_OPENPORT_13S_PID 0xCC49 /* OpenPort 1.3 Subaru */
    +#define FTDI_TACTRIX_OPENPORT_13U_PID 0xCC4A /* OpenPort 1.3 Universal */
    +
    +/*
    + * Telldus Technologies
    + */
    +#define TELLDUS_VID 0x1781 /* Vendor ID */
    +#define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz using FT232RL */
    +
    +/*
    + * IBS elektronik product ids
    + * Submitted by Thomas Schleusener
    + */
    +#define FTDI_IBS_US485_PID 0xff38 /* IBS US485 (USB<-->RS422/485 interface) */
    +#define FTDI_IBS_PICPRO_PID 0xff39 /* IBS PIC-Programmer */
    +#define FTDI_IBS_PCMCIA_PID 0xff3a /* IBS Card reader for PCMCIA SRAM-cards */
    +#define FTDI_IBS_PK1_PID 0xff3b /* IBS PK1 - Particel counter */
    +#define FTDI_IBS_RS232MON_PID 0xff3c /* IBS RS232 - Monitor */
    +#define FTDI_IBS_APP70_PID 0xff3d /* APP 70 (dust monitoring system) */
    +#define FTDI_IBS_PEDO_PID 0xff3e /* IBS PEDO-Modem (RF modem 868.35 MHz) */
    +#define FTDI_IBS_PROD_PID 0xff3f /* future device */
    +
    +/*
    + * MaxStream devices www.maxstream.net
    + */
    +#define FTDI_MAXSTREAM_PID 0xEE18 /* Xbee PKG-U Module */
    +
    +/* Olimex */
    +#define OLIMEX_VID 0x15BA
    +#define OLIMEX_ARM_USB_OCD_PID 0x0003
    +
    +/* Luminary Micro Stellaris Boards, VID = FTDI_VID */
    +/* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */
    +#define LMI_LM3S_DEVEL_BOARD_PID 0xbcd8
    +#define LMI_LM3S_EVAL_BOARD_PID 0xbcd9
    +
    +/* www.elsterelectricity.com Elster Unicom III Optical Probe */
    +#define FTDI_ELSTER_UNICOM_PID 0xE700 /* Product Id */
    +
    +/*
    + * The Mobility Lab (TML)
    + * Submitted by Pierre Castella
    + */
    +#define TML_VID 0x1B91 /* Vendor ID */
    +#define TML_USB_SERIAL_PID 0x0064 /* USB - Serial Converter */
    +
    +/* Propox devices */
    +#define FTDI_PROPOX_JTAGCABLEII_PID 0xD738
    +
    +/* Rig Expert Ukraine devices */
    +#define FTDI_REU_TINY_PID 0xED22 /* RigExpert Tiny */
    +
    +/* Domintell products http://www.domintell.com */
    +#define FTDI_DOMINTELL_DGQG_PID 0xEF50 /* Master */
    +#define FTDI_DOMINTELL_DUSB_PID 0xEF51 /* DUSB01 module */
    +
    +/* Alti-2 products http://www.alti-2.com */
    +#define ALTI2_VID 0x1BC9
    +#define ALTI2_N3_PID 0x6001 /* Neptune 3 */
    +
    +/*
    + * FIC / OpenMoko, Inc. http://wiki.openmoko.org/wiki/Neo1973_Debug_Board_v3
    + * Submitted by Harald Welte <laforge@openmoko.org>
    + */
    +#define FIC_VID 0x1457
    +#define FIC_NEO1973_DEBUG_PID 0x5118
    +
    +/*
    + * RATOC REX-USB60F
    + */
    +#define RATOC_VENDOR_ID 0x0584
    +#define RATOC_PRODUCT_ID_USB60F 0xb020
    +
    +/*
    + * DIEBOLD BCS SE923
    + */
    +#define DIEBOLD_BCS_SE923_PID 0xfb99
    +
    +/*
    + * Atmel STK541
    + */
    +#define ATMEL_VID 0x03eb /* Vendor ID */
    +#define STK541_PID 0x2109 /* Zigbee Controller */
    +
    +/*
    + * Dresden Elektronic Sensor Terminal Board
    + */
    +#define DE_VID 0x1cf1 /* Vendor ID */
    +#define STB_PID 0x0001 /* Sensor Terminal Board */
    +#define WHT_PID 0x0004 /* Wireless Handheld Terminal */
    +
    +/*
    + * Blackfin gnICE JTAG
    + * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice
    + */
    +#define ADI_VID 0x0456
    +#define ADI_GNICE_PID 0xF000
    +#define ADI_GNICEPLUS_PID 0xF001
    +
    +/*
    + * JETI SPECTROMETER SPECBOS 1201
    + * http://www.jeti.com/products/sys/scb/scb1201.php
    + */
    +#define JETI_VID 0x0c6c
    +#define JETI_SPC1201_PID 0x04b2
    +
    +/*
    + * Marvell SheevaPlug
    + */
    +#define MARVELL_VID 0x9e88
    +#define MARVELL_SHEEVAPLUG_PID 0x9e8f
    +
    +#define FTDI_TURTELIZER_PID 0xBDC8 /* JTAG/RS-232 adapter by egnite GmBH */
    +
    +/*
    + * GN Otometrics (http://www.otometrics.com)
    + * Submitted by Ville Sundberg.
    + */
    +#define GN_OTOMETRICS_VID 0x0c33 /* Vendor ID */
    +#define AURICAL_USB_PID 0x0010 /* Aurical USB Audiometer */
    +
    +/*
    + * Bayer Ascensia Contour blood glucose meter USB-converter cable.
    + * http://winglucofacts.com/cables/
    + */
    +#define BAYER_VID 0x1A79
    +#define BAYER_CONTOUR_CABLE_PID 0x6001
    +
    +/*
    + * Marvell OpenRD Base, Client
    + * http://www.open-rd.org
    + * OpenRD Base, Client use VID 0x0403
    + */
    +#define MARVELL_OPENRD_PID 0x9e90
    +
    +/*
    + * Hameg HO820 and HO870 interface (using VID 0x0403)
    + */
    +#define HAMEG_HO820_PID 0xed74
    +#define HAMEG_HO870_PID 0xed71
    +

    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2010-03-13 01:49    [W:4.383 / U:0.028 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site