lkml.org 
[lkml]   [2010]   [Feb]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [linux-pm] [PATCH 8/9] PCI / ACPI / PM: Platform support for PCI PME wake-up (rev. 7)
On Mon, Feb 08, 2010 at 10:30:30PM +0100, Rafael J. Wysocki wrote:
> On Monday 08 February 2010, Rafael J. Wysocki wrote:
> > On Monday 08 February 2010, Gary Hade wrote:
> > > On Sat, Feb 06, 2010 at 09:11:56PM +0100, Rafael J. Wysocki wrote:
> > > > On Saturday 06 February 2010, Bjorn Helgaas wrote:
> > > > > On Sunday 10 January 2010 07:01:03 am Rafael J. Wysocki wrote:
> > > > > > From: Rafael J. Wysocki <rjw@sisk.pl>
> > > > > >
> > > > > > Although the majority of PCI devices can generate PMEs that in
> > > > > > principle may be used to wake up devices suspended at run time,
> > > > > > platform support is generally necessary to convert PMEs into wake-up
> > > > > > events that can be delivered to the kernel. If ACPI is used for this
> > > > > > purpose, a PME generated by a PCI device will trigger the ACPI GPE
> > > > > > associated with the device to generate an ACPI wake-up event that we
> > > > > > can set up a handler for, provided that everything is configured
> > > > > > correctly.
> > > > >
> > > > > I think acpiphp needs a little attention after this patch. Gary
> > > > > Hade noticed while testing Jesse's linux-next branch that acpiphp
> > > > > complains like this:
> > > > >
> > > > > acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> > > > > acpiphp: Slot [9] registered
> > > > > acpiphp: Slot [10] registered
> > > > > acpiphp_glue: failed to register interrupt notify handler
> > > > > acpiphp: Slot [6] registered
> > > > > acpiphp_glue: failed to register interrupt notify handler
> > > > >
> > > > > I reproduced this on an HP rx3600 (ia64), and found that acpiphp
> > > > > doesn't complain on commit 82533a617f453, but it *does* complain
> > > > > on commit fb3383bb4ac6e, which seems to be this patch.
> > > >
> > > > I can't see the possible reason looking at the code alone.
> > > >
> > > > Could you add a debug printk() printing the error code returned by
> > > > pci_acpi_add_hp_notifier() in acpiphp_glue.c:register_slot(), please?
> > >
> > > Rafael, On the system where I ran into the problem it returns
> > > AE_NOT_FOUND. See below.
> >
> > Thanks!
> >
> > Well, that means there's no struct acpi_device object associated with handle.
> >
> > I must admit I didn't take that into consideration, but it should be easily
> > fixable. I'll send a patch for that later today.
>
> Patch appended.
>
> If the theory is correct, it should fix the issue. Please test.

Well, acpiphp now loads OK with no disturbing messages:
[ 247.360878] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 247.385048] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 247.385459] acpiphp_glue: found PCI host-bus bridge with hot-pluggable slots
[ 247.385486] acpiphp_glue: found ACPI PCI Hotplug slot 1 at PCI 0000:02:01
[ 247.385519] acpiphp: Slot [1] registered
[ 247.386167] acpiphp_glue: found PCI host-bus bridge with hot-pluggable slots
[ 247.386196] acpiphp_glue: found ACPI PCI Hotplug slot 2 at PCI 0000:06:01
[ 247.386225] acpiphp: Slot [2] registered
[ 247.386828] acpiphp_glue: found PCI-to-PCI bridge at PCI 0000:0a:00.0
[ 247.386861] acpiphp_glue: found ACPI PCI Hotplug slot 3 at PCI 0000:0b:00
[ 247.386902] acpiphp: Slot [3] registered
[ 247.387564] acpiphp_glue: found PCI-to-PCI bridge at PCI 0000:0f:00.0
[ 247.387597] acpiphp_glue: found ACPI PCI Hotplug slot 4 at PCI 0000:10:00
[ 247.387620] acpiphp: Slot [4] registered
[ 247.388293] acpiphp_glue: found PCI-to-PCI bridge at PCI 0000:14:00.0
[ 247.388324] acpiphp_glue: found ACPI PCI Hotplug slot 5 at PCI 0000:15:00
[ 247.388347] acpiphp: Slot [5] registered
[ 247.389041] acpiphp_glue: found PCI-to-PCI bridge at PCI 0000:19:00.0
[ 247.389077] acpiphp_glue: found ACPI PCI Hotplug slot 6 at PCI 0000:1a:00
[ 247.389114] acpiphp: Slot [6] registered
[ 247.389736] acpiphp_glue: Bus 0000:1a has 1 slot
[ 247.389739] acpiphp_glue: Bus 0000:15 has 1 slot
[ 247.389742] acpiphp_glue: Bus 0000:10 has 1 slot
[ 247.389746] acpiphp_glue: Bus 0000:0b has 1 slot
[ 247.389748] acpiphp_glue: Bus 0000:06 has 1 slot
[ 247.389751] acpiphp_glue: Bus 0000:02 has 1 slot
[ 247.389753] acpiphp_glue: Total 6 slots

However, I didn't have a chance to confirm that hot-add of a
PCI card works correctly before someone else swiped the system
from me for a while. I will verify this when I get it back,
hopefully later today.

Gary

--
Gary Hade
System x Enablement
IBM Linux Technology Center
503-578-4503 IBM T/L: 775-4503
garyhade@us.ibm.com
http://www.ibm.com/linux/ltc



\
 
 \ /
  Last update: 2010-02-09 00:39    [W:0.201 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site