lkml.org 
[lkml]   [2010]   [Feb]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 8/9] PCI / ACPI / PM: Platform support for PCI PME wake-up (rev. 7)
On Mon, Feb 08, 2010 at 08:17:14PM +0100, Rafael J. Wysocki wrote:
> On Monday 08 February 2010, Gary Hade wrote:
> > On Sat, Feb 06, 2010 at 09:11:56PM +0100, Rafael J. Wysocki wrote:
> > > On Saturday 06 February 2010, Bjorn Helgaas wrote:
> > > > On Sunday 10 January 2010 07:01:03 am Rafael J. Wysocki wrote:
> > > > > From: Rafael J. Wysocki <rjw@sisk.pl>
> > > > >
> > > > > Although the majority of PCI devices can generate PMEs that in
> > > > > principle may be used to wake up devices suspended at run time,
> > > > > platform support is generally necessary to convert PMEs into wake-up
> > > > > events that can be delivered to the kernel. If ACPI is used for this
> > > > > purpose, a PME generated by a PCI device will trigger the ACPI GPE
> > > > > associated with the device to generate an ACPI wake-up event that we
> > > > > can set up a handler for, provided that everything is configured
> > > > > correctly.
> > > >
> > > > I think acpiphp needs a little attention after this patch. Gary
> > > > Hade noticed while testing Jesse's linux-next branch that acpiphp
> > > > complains like this:
> > > >
> > > > acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> > > > acpiphp: Slot [9] registered
> > > > acpiphp: Slot [10] registered
> > > > acpiphp_glue: failed to register interrupt notify handler
> > > > acpiphp: Slot [6] registered
> > > > acpiphp_glue: failed to register interrupt notify handler
> > > >
> > > > I reproduced this on an HP rx3600 (ia64), and found that acpiphp
> > > > doesn't complain on commit 82533a617f453, but it *does* complain
> > > > on commit fb3383bb4ac6e, which seems to be this patch.
> > >
> > > I can't see the possible reason looking at the code alone.
> > >
> > > Could you add a debug printk() printing the error code returned by
> > > pci_acpi_add_hp_notifier() in acpiphp_glue.c:register_slot(), please?
> >
> > Rafael, On the system where I ran into the problem it returns
> > AE_NOT_FOUND. See below.
>
> Thanks!
>
> Well, that means there's no struct acpi_device object associated with handle.

Yes, I also added code to pci_acpi_add_hp_notifier() that
confirms the -ENODEV return from acpi_bus_get_device() for
non-populated slots.

I thought it was kind of curious that Bjorn's message seemed
to indicate that acpiphp actually loaded on his system when
it did not load on mine. It turns out that the load failure
on my system was apparently due to all of the hotpluggable
slots being non-populated. After booting with a card
present in slot 3, register_slot() got some AE_OK returns
from pci_acpi_add_hp_notifier() _and_ the acpiphp load
succeeded. See below.

>
> I must admit I didn't take that into consideration, but it should be easily
> fixable. I'll send a patch for that later today.

Thanks. I'll give it a test drive when I see it.

Gary

--
Gary Hade
System x Enablement
IBM Linux Technology Center
503-578-4503 IBM T/L: 775-4503
garyhade@us.ibm.com
http://www.ibm.com/linux/ltc

[ 120.320794] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 120.341939] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 120.341960] pci_acpi_add_hp_notifier: acpi_bus_get_device_ret=0
[ 120.342027] pci_acpi_add_hp_notifier: acpi_bus_get_device_ret=0
[ 120.342043] pci_acpi_add_hp_notifier: acpi_bus_get_device_ret=0
[ 120.342073] pci_acpi_add_hp_notifier: acpi_bus_get_device_ret=0
[ 120.342105] pci_acpi_add_hp_notifier: acpi_bus_get_device_ret=0
[ 120.342151] pci_acpi_add_hp_notifier: acpi_bus_get_device_ret=0
[ 120.342191] pci_acpi_add_hp_notifier: acpi_bus_get_device_ret=0
[ 120.342232] pci_acpi_add_hp_notifier: acpi_bus_get_device_ret=0
[ 120.342440] acpiphp: Slot [1] registered
[ 120.342445] pci_acpi_add_hp_notifier: acpi_bus_get_device_ret=-19
[ 120.342448] register_slot: status=0x5
[ 120.342450] acpiphp_glue: failed to register interrupt notify handler
[ 120.342576] acpiphp: Slot [2] registered
[ 120.342580] pci_acpi_add_hp_notifier: acpi_bus_get_device_ret=-19
[ 120.342582] register_slot: status=0x5
[ 120.342584] acpiphp_glue: failed to register interrupt notify handler
[ 120.342744] acpiphp: Slot [3] registered
[ 120.342748] pci_acpi_add_hp_notifier: acpi_bus_get_device_ret=0
[ 120.342751] register_slot: status=0x0
[ 120.342886] pci_acpi_add_hp_notifier: acpi_bus_get_device_ret=0
[ 120.342889] register_slot: status=0x0
[ 120.342966] pci_acpi_add_hp_notifier: acpi_bus_get_device_ret=0
[ 120.342973] register_slot: status=0x0
[ 120.343049] pci_acpi_add_hp_notifier: acpi_bus_get_device_ret=0
[ 120.343054] register_slot: status=0x0
[ 120.343128] pci_acpi_add_hp_notifier: acpi_bus_get_device_ret=0
[ 120.343133] register_slot: status=0x0
[ 120.343209] pci_acpi_add_hp_notifier: acpi_bus_get_device_ret=0
[ 120.343215] register_slot: status=0x0
[ 120.343290] pci_acpi_add_hp_notifier: acpi_bus_get_device_ret=0
[ 120.343295] register_slot: status=0x0
[ 120.343368] pci_acpi_add_hp_notifier: acpi_bus_get_device_ret=0
[ 120.343374] register_slot: status=0x0
[ 120.343378] pci_acpi_add_hp_notifier: acpi_bus_get_device_ret=0
[ 120.343381] init_bridge_misc: status=0x0
[ 120.343640] acpiphp: Slot [4] registered
[ 120.343645] pci_acpi_add_hp_notifier: acpi_bus_get_device_ret=-19
[ 120.343647] register_slot: status=0x5
[ 120.343649] acpiphp_glue: failed to register interrupt notify handler
[ 120.343881] acpiphp: Slot [5] registered
[ 120.343885] pci_acpi_add_hp_notifier: acpi_bus_get_device_ret=-19
[ 120.343887] register_slot: status=0x5
[ 120.343889] acpiphp_glue: failed to register interrupt notify handler
[ 120.344225] acpiphp: Slot [6] registered
[ 120.344234] pci_acpi_add_hp_notifier: acpi_bus_get_device_ret=-19
[ 120.344242] register_slot: status=0x5
[ 120.344249] acpiphp_glue: failed to register interrupt notify handler



\
 
 \ /
  Last update: 2010-02-08 22:15    [from the cache]
©2003-2011 Jasper Spaans