lkml.org 
[lkml]   [2010]   [Feb]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRE: Gianfar driver failing on MPC8641D based board
Date
From


>-----Original Message-----
>From: Anton Vorontsov [mailto:avorontsov@ru.mvista.com]
>Sent: Friday, February 26, 2010 8:45 AM
>To: Paul Gortmaker
>Cc: Martyn Welch; linuxppc-dev list; netdev@vger.kernel.org;
>linux-kernel@vger.kernel.org; Kumar Gopalpet-B05799;
>davem@davemloft.net; Kumar Gala
>Subject: Re: Gianfar driver failing on MPC8641D based board
>
>On Thu, Feb 25, 2010 at 07:53:30PM -0500, Paul Gortmaker wrote:
>[...]
>> I was able to reproduce it on an 8641D and bisected it down to this:
>>
>> -----------
>> commit a3bc1f11e9b867a4f49505ecac486a33af248b2e
>> Author: Anton Vorontsov <avorontsov@ru.mvista.com>
>> Date: Tue Nov 10 14:11:10 2009 +0000
>>
>> gianfar: Revive SKB recycling
>
>Thanks for the bisect. I have a guess why tx hangs in SMP
>case. Could anyone try the patch down below?
>
>[...]
>> ...which probably explains why you weren't seeing it on non-SMP.
>> I'd imagine it would show up on any of the e500mc boards too.
>
>Yeah.. Pity, I don't have SMP boards anymore. I'll try to get
>one though.
>
>
>diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
>index 8bd3c9f..3ff3bd0 100644
>--- a/drivers/net/gianfar.c
>+++ b/drivers/net/gianfar.c
>@@ -2614,6 +2614,8 @@ static int gfar_poll(struct napi_struct
>*napi, int budget)
> tx_queue = priv->tx_queue[rx_queue->qindex];
>
> tx_cleaned += gfar_clean_tx_ring(tx_queue);
>+ if (!tx_cleaned && !tx_queue->num_txbdfree)
>+ tx_cleaned += 1; /* don't
>complete napi */
> rx_cleaned_per_queue =
>gfar_clean_rx_ring(rx_queue,
>
>budget_per_queue);
> rx_cleaned += rx_cleaned_per_queue;
>

Anton,

There is also one more issue that I have been observing with the patch
"gianfar: Revive SKB recycling".
The issue is when I do a IPV4 forwarding test scenario with
bidirectional flows (SMP environment). I am using Spirent smart bits
(smartflow) for automation testing and I frequently observe smart flow
reporting "Rx packet counte greater than Tx packet count. Duplicate
packets might have been received".

To just get over the issue I have removed this patch and I didn't see
the issue.

To a certain extent I could get over the problem by using atomic_t for
num_txbdfree (atomic_add and atomic_dec instructions for updating the
num_txbdfree) and completely removing the spin_locks in the tx routines.

Also, I feel we might want to make some more changes to the
gfar_clean_tx_ring( ) and gfar_start_xmit() routines so that they can
operate parallely.

I am really sorry for not posting it a bit earlier as I am caught up
with some urgent issues.

--

Thanks
Sandeep


\
 
 \ /
  Last update: 2010-02-26 06:01    [from the cache]
©2003-2011 Jasper Spaans