lkml.org 
[lkml]   [2010]   [Feb]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 12/14] Regulators: wm8994 - clean up driver data after removal
Date
It is a good tone to reset driver data after unbinding the device.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---

drivers/regulator/wm8994-regulator.c | 11 +++++++----
1 files changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/regulator/wm8994-regulator.c b/drivers/regulator/wm8994-regulator.c
index d09e018..95454a4 100644
--- a/drivers/regulator/wm8994-regulator.c
+++ b/drivers/regulator/wm8994-regulator.c
@@ -26,7 +26,7 @@

struct wm8994_ldo {
int enable;
- int is_enabled;
+ bool is_enabled;
struct regulator_dev *regulator;
struct wm8994 *wm8994;
};
@@ -43,7 +43,7 @@ static int wm8994_ldo_enable(struct regulator_dev *rdev)
return 0;

gpio_set_value(ldo->enable, 1);
- ldo->is_enabled = 1;
+ ldo->is_enabled = true;

return 0;
}
@@ -57,7 +57,7 @@ static int wm8994_ldo_disable(struct regulator_dev *rdev)
return -EINVAL;

gpio_set_value(ldo->enable, 0);
- ldo->is_enabled = 0;
+ ldo->is_enabled = false;

return 0;
}
@@ -218,7 +218,7 @@ static __devinit int wm8994_ldo_probe(struct platform_device *pdev)

ldo->wm8994 = wm8994;

- ldo->is_enabled = 1;
+ ldo->is_enabled = true;

if (pdata->ldo[id].enable && gpio_is_valid(pdata->ldo[id].enable)) {
ldo->enable = pdata->ldo[id].enable;
@@ -263,6 +263,8 @@ static __devexit int wm8994_ldo_remove(struct platform_device *pdev)
{
struct wm8994_ldo *ldo = platform_get_drvdata(pdev);

+ platform_set_drvdata(pdev, NULL);
+
regulator_unregister(ldo->regulator);
if (gpio_is_valid(ldo->enable))
gpio_free(ldo->enable);
@@ -276,6 +278,7 @@ static struct platform_driver wm8994_ldo_driver = {
.remove = __devexit_p(wm8994_ldo_remove),
.driver = {
.name = "wm8994-ldo",
+ .owner = THIS_MODULE,
},
};



\
 
 \ /
  Last update: 2010-02-24 08:41    [W:0.186 / U:0.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site