lkml.org 
[lkml]   [2010]   [Feb]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjecti915 drm/kms crash
Hello,

I get the following crash on a Fujitu/Siemens ST6012 Tablet PC (kms enabled):

...
[ 0.442322] [drm] Initialized drm 1.1.0 20060810
[ 0.442478] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.442612] i915 0000:00:02.0: setting latency timer to 64
[ 0.464043] i915 0000:00:02.0: irq 26 for MSI/MSI-X
[ 0.464053] [drm] set up 31M of stolen space
[ 0.566509] ------------[ cut here ]------------
[ 0.566642] WARNING: at drivers/gpu/drm/drm_crtc_helper.c:1035 drm_helper_initial_config+0x41/0x5a()
[ 0.566853] Hardware name: STYLISTIC ST6012
[ 0.566978] No connectors reported connected with modes
[ 0.567106] Modules linked in:
[ 0.567273] Pid: 1, comm: swapper Not tainted 2.6.32.7 #3
[ 0.567402] Call Trace:
[ 0.567528] [<ffffffff8129894b>] ? drm_helper_initial_config+0x41/0x5a
[ 0.567661] [<ffffffff8129894b>] ? drm_helper_initial_config+0x41/0x5a
[ 0.567795] [<ffffffff810458dd>] ? warn_slowpath_common+0x77/0xa3
[ 0.567926] [<ffffffff81045965>] ? warn_slowpath_fmt+0x51/0x59
[ 0.568070] [<ffffffff812c8848>] ? intel_crt_detect+0x26a/0x311
[ 0.568202] [<ffffffff81298818>] ? drm_helper_probe_single_connector_modes+0x1df/0x26b
[ 0.568413] [<ffffffff812988d9>] ? drm_helper_probe_connector_modes+0x35/0x66
[ 0.568622] [<ffffffff8129894b>] ? drm_helper_initial_config+0x41/0x5a
[ 0.568756] [<ffffffff812ad9c4>] ? i915_driver_load+0xf26/0xff2
[ 0.568889] [<ffffffff812a2d92>] ? drm_sysfs_device_add+0x7d/0x9e
[ 0.569025] [<ffffffff812a1072>] ? drm_get_dev+0x39e/0x488
[ 0.569158] [<ffffffff8122b652>] ? local_pci_probe+0x12/0x16
[ 0.569289] [<ffffffff8122c27a>] ? pci_device_probe+0xba/0xe3
[ 0.569422] [<ffffffff812dfa2f>] ? driver_probe_device+0x8d/0x128
[ 0.569554] [<ffffffff812dfb19>] ? __driver_attach+0x4f/0x6f
[ 0.569685] [<ffffffff812dfaca>] ? __driver_attach+0x0/0x6f
[ 0.569816] [<ffffffff812df2d4>] ? bus_for_each_dev+0x43/0x74
[ 0.569947] [<ffffffff812dec94>] ? bus_add_driver+0x116/0x25f
[ 0.570079] [<ffffffff812dfdb3>] ? driver_register+0xa7/0x111
[ 0.570210] [<ffffffff81738053>] ? i915_init+0x0/0x51
[ 0.570341] [<ffffffff8122c4b5>] ? __pci_register_driver+0x50/0xb7
[ 0.570472] [<ffffffff81738053>] ? i915_init+0x0/0x51
[ 0.570603] [<ffffffff81009051>] ? do_one_initcall+0x50/0x148
[ 0.570735] [<ffffffff81713629>] ? kernel_init+0x150/0x1a6
[ 0.570866] [<ffffffff81713140>] ? early_idt_handler+0x0/0x71
[ 0.570998] [<ffffffff8100cb5a>] ? child_rip+0xa/0x20
[ 0.571128] [<ffffffff81713140>] ? early_idt_handler+0x0/0x71
[ 0.571259] [<ffffffff817134d9>] ? kernel_init+0x0/0x1a6
[ 0.571389] [<ffffffff8100cb50>] ? child_rip+0x0/0x20
[ 0.571522] ---[ end trace 6e64936bd3455b79 ]---

This is a vanilla Kernel (2.6.32.7)/ Debian testing system.

Linux (without framebuffer) and X.org used to work fine on Debian stable,
but I needed to upgrade for a newer Version of Mesa.

Regards

Sven

--
The main thing to note is that when you choose open source you don't
get a Windows operating system.
(from http://www.dell.com/ubuntu)
/me is giggls@ircnet, http://sven.gegg.us/ on the Web


\
 
 \ /
  Last update: 2010-02-02 18:03    [W:4.188 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site