lkml.org 
[lkml]   [2010]   [Feb]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [Acpi4asus-user] ACPI device for ASUS EEEPC 1101HA not added
On Mon, 1 Feb 2010, andrej.gelenberg@udo.edu wrote:

> Hi,
>
> you need to whitelist your eee pc for OSI(Linux) in drivers/acpi/blacklist.c
> like this:
>
> + /*
> + * On newer Eeepc, the interface used by eeepc-laptop (ASUS010)
> + * is disabled without _OSI(Linux)
> + */
> + {
> + .callback = dmi_enable_osi_linux,
> + .ident = "Asus Eeepc-1101HA",
> + .matches = {
> + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer INC."),
> + DMI_MATCH(DMI_PRODUCT_NAME, "1101HA"),
> + },
> + },

Not necessarily the right fix. We have gone to a lot of trouble
to discourage BIOS vendors from depending on the ill-defined OSI(Linux),
so I hesitate to invoke it -- even for a workaround.

The problem at hand is that ASUS010 is not enabled for an OS
that claims compatibility with Win7 (MSOS() == MSW7) below.

Scope (\_SB)
{
Name (ATKP, Zero)
Device (ATKD)
{
Name (_HID, "ASUS010")
Name (_UID, 0x01010100)
Method (_STA, 0, NotSerialized)
{
If (LEqual (MSOS (), MSW7))
{
Return (Zero)
}
Else
{
Return (0x0F)
}

Return (Zero)
Return (0x0F)
}

(heh, see any indication of lack of quality in this code?:-)

MSOS() does this:

Scope (\)
{
Name (OSLX, 0x10)
Name (OSMS, 0x20)
Name (MS98, 0x21)
Name (MSME, 0x22)
Name (MS2K, 0x23)
Name (MSXP, 0x24)
Name (MSVT, 0x25)
Name (MSW7, 0x26)
Name (OSFG, Ones)
Method (MSOS, 0, NotSerialized)
{
If (LNotEqual (OSFG, Ones))
{
Return (OSFG)
}

Store (Zero, OSFG)
If (CondRefOf (_OSI, Local0))
{
If (_OSI ("Windows 2001"))
{
Store (MSXP, OSFG)
}

If (_OSI ("Windows 2001 SP1"))
{
Store (MSXP, OSFG)
}

If (_OSI ("Windows 2001 SP2"))
{
Store (MSXP, OSFG)
}

If (_OSI ("Windows 2006"))
{
Store (MSVT, OSFG)
}

If (_OSI ("Windows 2009"))
{
Store (MSW7, OSFG)
}

If (_OSI ("Linux"))
{
Store (OSLX, OSFG)
}

Return (OSFG)
}
Else


So I expect if you apply no patch, but boot with 'acpi_osi="!Windows 2009"'
then that would also work properly, as OSFG above will be set
to "MSVT" instead of "OSLX".

Looking through the DSDT, there are no references to OSLX or MSVT,
or MSXP, for that matter. However, there is an additional reference
to MSV7 in the temperature reading part of thermal zone TZ00,
that looks like some sort of OS-specific initialization, perhaps
a workaround. So also check that /proc/acpi/thermal_zone/*/temperature
still work before and after.

thanks,
-Len Brown, Intel Open Source Technology Center




\
 
 \ /
  Last update: 2010-02-02 07:05    [W:0.122 / U:0.864 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site