lkml.org 
[lkml]   [2010]   [Feb]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[RFC 4/4] libata: Make sil680 do its own exec_command posting
    Date
    Use our own mmio area to avoid PCI posting. This avoids the rather slow
    paranoid implementation in the default handler.

    (Note - this is pure paranoia, brute force testing says the SIL680 is doing
    the work itself somewhere as does the fact its worked without it for years
    in the old IDE code)

    We cannot make this logic generic as
    - There are only a couple of potential SFF style users
    - The other one can come up in PIO only modes with no bmdma


    Signed-off-by: Alan Cox <alan@linux.intel.com>
    ---

    drivers/ata/pata_sil680.c | 30 ++++++++++++++++++++++++++----
    1 files changed, 26 insertions(+), 4 deletions(-)


    diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
    index a2ace48..065339d 100644
    --- a/drivers/ata/pata_sil680.c
    +++ b/drivers/ata/pata_sil680.c
    @@ -190,15 +190,37 @@ static void sil680_set_dmamode(struct ata_port *ap, struct ata_device *adev)
    pci_write_config_word(pdev, ua, ultra);
    }

    +/**
    + * sil680_sff_exec_command - issue ATA command to host controller
    + * @ap: port to which command is being issued
    + * @tf: ATA taskfile register set
    + *
    + * Issues ATA command, with proper synchronization with interrupt
    + * handler / other threads. Use our MMIO space for PCI posting to avoid
    + * a hideously slow cycle all the way to the device.
    + *
    + * LOCKING:
    + * spin_lock_irqsave(host lock)
    + */
    +void sil680_sff_exec_command(struct ata_port *ap,
    + const struct ata_taskfile *tf)
    +{
    + DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command);
    + iowrite8(tf->command, ap->ioaddr.command_addr);
    + ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
    +}
    +
    static struct scsi_host_template sil680_sht = {
    ATA_BMDMA_SHT(DRV_NAME),
    };

    +
    static struct ata_port_operations sil680_port_ops = {
    - .inherits = &ata_bmdma32_port_ops,
    - .cable_detect = sil680_cable_detect,
    - .set_piomode = sil680_set_piomode,
    - .set_dmamode = sil680_set_dmamode,
    + .inherits = &ata_bmdma32_port_ops,
    + .sff_exec_command = sil680_sff_exec_command,
    + .cable_detect = sil680_cable_detect,
    + .set_piomode = sil680_set_piomode,
    + .set_dmamode = sil680_set_dmamode,
    };

    /**


    \
     
     \ /
      Last update: 2010-02-17 14:41    [W:5.554 / U:0.008 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site