lkml.org 
[lkml]   [2010]   [Feb]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 35/35] x86: make 32bit apic flat to physflat switch like 64bit
kill def_to_bigsmp
and move switch from default to bigsmp at default_setup_apic_routing...
so make default_setup_apic_routing more like 64 bit
also make the dmi relate code to be __init/__initdata

-v2: refresh it according to change in upstream

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/include/asm/apic.h | 3 -
arch/x86/include/asm/mpspec.h | 1 -
arch/x86/kernel/apic/bigsmp_32.c | 48 +---------------
arch/x86/kernel/apic/probe_32.c | 115 ++++++++++++++++++++------------------
arch/x86/kernel/apic/probe_64.c | 2 +-
arch/x86/kernel/setup.c | 2 -
arch/x86/kernel/smpboot.c | 2 +-
7 files changed, 65 insertions(+), 108 deletions(-)
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index b4ac2cd..d544523 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -456,9 +456,6 @@ static inline void default_wait_for_init_deassert(atomic_t *deassert)
return;
}

-extern void generic_bigsmp_probe(void);
-
-
#ifdef CONFIG_X86_LOCAL_APIC

#include <asm/smp.h>
diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h
index d8bf23a..b4b295c 100644
--- a/arch/x86/include/asm/mpspec.h
+++ b/arch/x86/include/asm/mpspec.h
@@ -23,7 +23,6 @@ extern int pic_mode;

#define MAX_IRQ_SOURCES 256

-extern unsigned int def_to_bigsmp;
extern u8 apicid_2_node[];

#ifdef CONFIG_X86_NUMAQ
diff --git a/arch/x86/kernel/apic/bigsmp_32.c b/arch/x86/kernel/apic/bigsmp_32.c
index cb804c5..350d60e 100644
--- a/arch/x86/kernel/apic/bigsmp_32.c
+++ b/arch/x86/kernel/apic/bigsmp_32.c
@@ -7,7 +7,6 @@
#include <linux/cpumask.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/dmi.h>
#include <linux/smp.h>

#include <asm/apicdef.h>
@@ -73,13 +72,6 @@ static void bigsmp_init_apic_ldr(void)
apic_write(APIC_LDR, val);
}

-static void bigsmp_setup_apic_routing(void)
-{
- printk(KERN_INFO
- "Enabling APIC mode: Physflat. Using %d I/O APICs\n",
- nr_ioapics);
-}
-
static int bigsmp_apicid_to_node(int logical_apicid)
{
return apicid_2_node[hard_smp_processor_id()];
@@ -154,52 +146,16 @@ static void bigsmp_send_IPI_all(int vector)
bigsmp_send_IPI_mask(cpu_online_mask, vector);
}

-static int dmi_bigsmp; /* can be set by dmi scanners */
-
-static int hp_ht_bigsmp(const struct dmi_system_id *d)
-{
- printk(KERN_NOTICE "%s detected: force use of apic=bigsmp\n", d->ident);
- dmi_bigsmp = 1;
-
- return 0;
-}
-
-
-static const struct dmi_system_id bigsmp_dmi_table[] = {
- { hp_ht_bigsmp, "HP ProLiant DL760 G2",
- { DMI_MATCH(DMI_BIOS_VENDOR, "HP"),
- DMI_MATCH(DMI_BIOS_VERSION, "P44-"),
- }
- },
-
- { hp_ht_bigsmp, "HP ProLiant DL740",
- { DMI_MATCH(DMI_BIOS_VENDOR, "HP"),
- DMI_MATCH(DMI_BIOS_VERSION, "P47-"),
- }
- },
- { } /* NULL entry stops DMI scanning */
-};
-
static void bigsmp_vector_allocation_domain(int cpu, struct cpumask *retmask)
{
cpumask_clear(retmask);
cpumask_set_cpu(cpu, retmask);
}

-static int probe_bigsmp(void)
-{
- if (def_to_bigsmp)
- dmi_bigsmp = 1;
- else
- dmi_check_system(bigsmp_dmi_table);
-
- return dmi_bigsmp;
-}
-
struct apic apic_bigsmp = {

.name = "bigsmp",
- .probe = probe_bigsmp,
+ .probe = NULL,
.acpi_madt_oem_check = NULL,
.apic_id_registered = bigsmp_apic_id_registered,

@@ -217,7 +173,7 @@ struct apic apic_bigsmp = {
.init_apic_ldr = bigsmp_init_apic_ldr,

.ioapic_phys_id_map = bigsmp_ioapic_phys_id_map,
- .setup_apic_routing = bigsmp_setup_apic_routing,
+ .setup_apic_routing = NULL,
.multi_timer_check = NULL,
.apicid_to_node = bigsmp_apicid_to_node,
.cpu_to_logical_apicid = bigsmp_cpu_to_logical_apicid,
diff --git a/arch/x86/kernel/apic/probe_32.c b/arch/x86/kernel/apic/probe_32.c
index 99d2fe0..874f9a3 100644
--- a/arch/x86/kernel/apic/probe_32.c
+++ b/arch/x86/kernel/apic/probe_32.c
@@ -14,6 +14,8 @@
#include <linux/ctype.h>
#include <linux/init.h>
#include <linux/errno.h>
+#include <linux/dmi.h>
+
#include <asm/fixmap.h>
#include <asm/mpspec.h>
#include <asm/apicdef.h>
@@ -52,40 +54,6 @@ static int __init print_ipi_mode(void)
}
late_initcall(print_ipi_mode);

-void __init default_setup_apic_routing(void)
-{
- int version = apic_version[boot_cpu_physical_apicid];
-
- if (num_possible_cpus() > 8) {
- switch (boot_cpu_data.x86_vendor) {
- case X86_VENDOR_INTEL:
- if (!APIC_XAPIC(version)) {
- def_to_bigsmp = 0;
- break;
- }
- /* If P4 and above fall through */
- case X86_VENDOR_AMD:
- def_to_bigsmp = 1;
- }
- }
-
-#ifdef CONFIG_X86_BIGSMP
- generic_bigsmp_probe();
-#endif
-
- if (apic->setup_apic_routing)
- apic->setup_apic_routing();
-}
-
-static void setup_apic_flat_routing(void)
-{
-#ifdef CONFIG_X86_IO_APIC
- printk(KERN_INFO
- "Enabling APIC mode: Flat. Using %d I/O APICs\n",
- nr_ioapics);
-#endif
-}
-
static void default_vector_allocation_domain(int cpu, struct cpumask *retmask)
{
/*
@@ -101,16 +69,10 @@ static void default_vector_allocation_domain(int cpu, struct cpumask *retmask)
cpumask_bits(retmask)[0] = APIC_ALL_CPUS;
}

-/* should be called last. */
-static int probe_default(void)
-{
- return 1;
-}
-
struct apic apic_default = {

.name = "default",
- .probe = probe_default,
+ .probe = NULL,
.acpi_madt_oem_check = NULL,
.apic_id_registered = default_apic_id_registered,

@@ -128,7 +90,7 @@ struct apic apic_default = {
.init_apic_ldr = default_init_apic_ldr,

.ioapic_phys_id_map = default_ioapic_phys_id_map,
- .setup_apic_routing = setup_apic_flat_routing,
+ .setup_apic_routing = NULL,
.multi_timer_check = NULL,
.apicid_to_node = default_apicid_to_node,
.cpu_to_logical_apicid = default_cpu_to_logical_apicid,
@@ -217,24 +179,70 @@ static int __init parse_apic(char *arg)
}
early_param("apic", parse_apic);

-void __init generic_bigsmp_probe(void)
+static int dmi_bigsmp __initdata; /* can be set by dmi scanners */
+
+static int __init hp_ht_bigsmp(const struct dmi_system_id *d)
+{
+ printk(KERN_NOTICE "%s detected: force use of apic=bigsmp\n", d->ident);
+ dmi_bigsmp = 1;
+
+ return 0;
+}
+
+static struct dmi_system_id bigsmp_dmi_table[] __initdata = {
+ { hp_ht_bigsmp, "HP ProLiant DL760 G2",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "HP"),
+ DMI_MATCH(DMI_BIOS_VERSION, "P44-"),
+ }
+ },
+
+ { hp_ht_bigsmp, "HP ProLiant DL740",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "HP"),
+ DMI_MATCH(DMI_BIOS_VERSION, "P47-"),
+ }
+ },
+ { } /* NULL entry stops DMI scanning */
+};
+
+static inline const char *get_apic_name(struct apic *apic)
+{
+ if (apic == &apic_default)
+ return "flat";
+#ifdef CONFIG_X86_BIGSMP
+ if (apic == &apic_bigsmp)
+ return "physical flat";
+#endif
+ return apic->name;
+}
+
+void __init default_setup_apic_routing(void)
{
#ifdef CONFIG_X86_BIGSMP
/*
- * This routine is used to switch to bigsmp mode when
- * - There is no apic= option specified by the user
- * - generic_apic_probe() has chosen apic_default as the sub_arch
- * - we find more than 8 CPUs in acpi LAPIC listing with xAPIC support
+ * make sure we go to bigsmp according to real nr_cpu_ids
*/
-
if (!cmdline_apic && apic == &apic_default) {
- if (apic_bigsmp.probe()) {
+ if (nr_cpu_ids > 8)
apic = &apic_bigsmp;
- printk(KERN_INFO "Overriding APIC driver with %s\n",
- apic->name);
+ else {
+ dmi_check_system(bigsmp_dmi_table);
+ if (dmi_bigsmp)
+ apic = &apic_bigsmp;
}
+ if (apic != &apic_default)
+ printk(KERN_INFO "Overriding APIC driver with %s\n",
+ get_apic_name(apic));
}
#endif
+ if (apic->setup_apic_routing)
+ apic->setup_apic_routing();
+ else {
+#ifdef CONFIG_X86_IO_APIC
+ printk(KERN_INFO
+ "Enabling APIC mode: %s. Using %d I/O APICs\n",
+ get_apic_name(apic), nr_ioapics);
+#endif
+ }
}

void __init generic_apic_probe(void)
@@ -242,14 +250,13 @@ void __init generic_apic_probe(void)
if (!cmdline_apic) {
int i;
for (i = 0; apic_probe[i]; i++) {
+ if (!apic_probe[i]->probe)
+ continue;
if (apic_probe[i]->probe()) {
apic = apic_probe[i];
break;
}
}
- /* Not visible without early console */
- if (!apic_probe[i])
- panic("Didn't find an APIC driver");
}
printk(KERN_INFO "Using APIC driver %s\n", apic->name);
}
diff --git a/arch/x86/kernel/apic/probe_64.c b/arch/x86/kernel/apic/probe_64.c
index 83e9be4..ea25de8 100644
--- a/arch/x86/kernel/apic/probe_64.c
+++ b/arch/x86/kernel/apic/probe_64.c
@@ -67,7 +67,7 @@ void __init default_setup_apic_routing(void)
}
#endif

- if (apic == &apic_flat && num_possible_cpus() > 8)
+ if (apic == &apic_flat && nr_cpu_ids > 8)
apic = &apic_physflat;

printk(KERN_INFO "Setting APIC routing to %s\n", apic->name);
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index d49e168..17759b7 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -184,8 +184,6 @@ static void set_mca_bus(int x)
#endif
}

-unsigned int def_to_bigsmp;
-
/* for MCA, but anyone else can use it if they want */
unsigned int machine_id;
unsigned int machine_submodel_id;
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 51ec4b6..2a25e74 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -950,7 +950,7 @@ static int __init smp_sanity_check(unsigned max_cpus)
preempt_disable();

#if !defined(CONFIG_X86_BIGSMP) && defined(CONFIG_X86_32)
- if (def_to_bigsmp && nr_cpu_ids > 8) {
+ if (apic == &apic_default && nr_cpu_ids > 8) {
unsigned int cpu;
unsigned nr;

--
1.6.4.2


\
 
 \ /
  Last update: 2010-02-10 10:27    [from the cache]
©2003-2014 Jasper Spaans. Advertise on this site