lkml.org 
[lkml]   [2010]   [Feb]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/3] SCRIPTS: s/should/must/ for all ERRORs
On Wed, 10 Feb 2010 01:41:03 +0100 Richard Hartmann wrote:

>
> Signed-off-by: Richard Hartmann <richih.mailinglist@gmail.com>
> ---

Well, I will gladly disagree. checkpatch is an advisory tool.
It has no such final authority to enforce /must/.

/must/ would OK on syntax errors that must be fixed before they will compile.


> scripts/checkpatch.pl | 32 ++++++++++++++++----------------
> 1 files changed, 16 insertions(+), 16 deletions(-)
>
> diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
> index d5405aa..96ca9f0 100755
> --- a/scripts/checkpatch.pl
> +++ b/scripts/checkpatch.pl
> @@ -1355,7 +1355,7 @@ sub process {
> my $ptr = substr($blank, 0, length($utf8_prefix)) . "^";
> my $hereptr = "$hereline$ptr\n";
>
> - ERROR("Invalid UTF-8, patch and commit message should be encoded in UTF-8\n" . $hereptr);
> + ERROR("Invalid UTF-8, patch and commit message must be encoded in UTF-8\n" . $hereptr);
> }
>
> # ignore non-hunk lines and lines being removed
> @@ -1408,7 +1408,7 @@ sub process {
> if ($rawline =~ /^\+\s* \t\s*\S/ ||
> $rawline =~ /^\+\s* \s*/) {
> my $herevet = "$here\n" . cat_vet($rawline) . "\n";
> - ERROR("code indent should use tabs where possible\n" . $herevet);
> + ERROR("code indent must use tabs where possible\n" . $herevet);
> }
>
> # check we are in a valid C source file if not then ignore this hunk
> @@ -1515,7 +1515,7 @@ sub process {
> }
> }
> if ($err ne '') {
> - ERROR("switch and case should be at the same indent\n$hereline$err");
> + ERROR("switch and case must be at the same indent\n$hereline$err");
> }
> }
>
> @@ -1543,7 +1543,7 @@ sub process {
> #print "pre<$pre_ctx>\nline<$line>\nctx<$ctx>\nnext<$lines[$ctx_ln - 1]>\n";
>
> if ($ctx !~ /{\s*/ && defined($lines[$ctx_ln -1]) && $lines[$ctx_ln - 1] =~ /^\+\s*{/) {
> - ERROR("that open brace { should be on the previous line\n" .
> + ERROR("that open brace { must be on the previous line\n" .
> "$here\n$ctx\n$lines[$ctx_ln - 1]\n");
> }
> if ($level == 0 && $pre_ctx !~ /}\s*while\s*\($/ &&
> @@ -1682,7 +1682,7 @@ sub process {
> # check for initialisation to aggregates open brace on the next line
> if ($line =~ /^.\s*{/ &&
> $prevline =~ /(?:^|[^=])=\s*$/) {
> - ERROR("that open brace { should be on the previous line\n" . $hereprev);
> + ERROR("that open brace { must be on the previous line\n" . $hereprev);
> }
>
> #
> @@ -1777,7 +1777,7 @@ sub process {
>
> #print "from<$from> to<$to>\n";
> if ($from ne $to) {
> - ERROR("\"(foo$from)\" should be \"(foo$to)\"\n" . $herecurr);
> + ERROR("\"(foo$from)\" must be \"(foo$to)\"\n" . $herecurr);
> }
> } elsif ($line =~ m{\b$NonptrType(\s*(?:$Modifier\b\s*|\*\s*)+)($Ident)}) {
> my ($from, $to, $ident) = ($1, $1, $2);
> @@ -1794,7 +1794,7 @@ sub process {
>
> #print "from<$from> to<$to> ident<$ident>\n";
> if ($from ne $to && $ident !~ /^$Modifier$/) {
> - ERROR("\"foo${from}bar\" should be \"foo${to}bar\"\n" . $herecurr);
> + ERROR("\"foo${from}bar\" must be \"foo${to}bar\"\n" . $herecurr);
> }
> }
>
> @@ -2188,7 +2188,7 @@ sub process {
> $stat_real = "[...]\n$stat_real";
> }
>
> - ERROR("trailing statements should be on next line\n" . $herecurr . $stat_real);
> + ERROR("trailing statements must be on next line\n" . $herecurr . $stat_real);
> }
> }
>
> @@ -2212,12 +2212,12 @@ sub process {
> my $s = $1;
> $s =~ s/$;//g; # Remove any comments
> if ($s !~ /^\s*(?:\sif|(?:{|)\s*\\?\s*$)/) {
> - ERROR("trailing statements should be on next line\n" . $herecurr);
> + ERROR("trailing statements must be on next line\n" . $herecurr);
> }
> }
> # if should not continue a brace
> if ($line =~ /}\s*if\b/) {
> - ERROR("trailing statements should be on next line\n" .
> + ERROR("trailing statements must be on next line\n" .
> $herecurr);
> }
> # case and default should not have general statements after them
> @@ -2227,14 +2227,14 @@ sub process {
> \s*return\s+
> )/xg)
> {
> - ERROR("trailing statements should be on next line\n" . $herecurr);
> + ERROR("trailing statements must be on next line\n" . $herecurr);
> }
>
> # Check for }<nl>else {, these must be at the same
> # indent level to be relevant to each other.
> if ($prevline=~/}\s*$/ and $line=~/^.\s*else\s*/ and
> $previndent == $indent) {
> - ERROR("else should follow close brace '}'\n" . $hereprev);
> + ERROR("else must follow close brace '}'\n" . $hereprev);
> }
>
> if ($prevline=~/}\s*$/ and $line=~/^.\s*while\s*/ and
> @@ -2247,7 +2247,7 @@ sub process {
> $s =~ s/\n.*//g;
>
> if ($s =~ /^\s*;/) {
> - ERROR("while should follow close brace '}'\n" . $hereprev);
> + ERROR("while must follow close brace '}'\n" . $hereprev);
> }
> }
>
> @@ -2356,7 +2356,7 @@ sub process {
> if ($rest !~ /while\s*\(/ &&
> $dstat !~ /$exceptions/)
> {
> - ERROR("Macros with multiple statements should be enclosed in a do - while loop\n" . "$here\n$ctx\n");
> + ERROR("Macros with multiple statements must be enclosed in a do - while loop\n" . "$here\n$ctx\n");
> }
>
> } elsif ($ctx !~ /;/) {
> @@ -2366,7 +2366,7 @@ sub process {
> $dstat !~ /^\.$Ident\s*=/ &&
> $dstat =~ /$Operators/)
> {
> - ERROR("Macros with complex values should be enclosed in parenthesis\n" . "$here\n$ctx\n");
> + ERROR("Macros with complex values must be enclosed in parenthesis\n" . "$here\n$ctx\n");
> }
> }
> }
> @@ -2564,7 +2564,7 @@ sub process {
> # storage class and type.
> if ($line =~ /\b$Type\s+$Inline\b/ ||
> $line =~ /\b$Inline\s+$Storage\b/) {
> - ERROR("inline keyword should sit between storage class and type\n" . $herecurr);
> + ERROR("inline keyword must sit between storage class and type\n" . $herecurr);
> }
>
> # Check for __inline__ and __inline, prefer inline
> --

---
~Randy


\
 
 \ /
  Last update: 2010-02-10 17:51    [W:1.573 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site