[lkml]   [2010]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
    Patch in this message
    Subject[192/289] xhci: Remove excessive printks with shared IRQs.
    2.6.36-stable review patch.  If anyone has any objections, please let us know.


    From: Sarah Sharp <>

    commit 241b652f1995de138106afd2f2e4eda9f8a3c240 upstream.

    If the xHCI host controller shares an interrupt line with another device,
    the xHCI driver needs to check if the interrupt was generated by its
    hardware. Unfortunately, the user will see a ton of "Spurious interrupt."
    lines if the other hardware interrupts often. Lawrence found his dmesg
    output cluttered with this output when the xHCI host shared an interrupt
    with his i915 hardware.

    Remove the warning, as sharing an interrupt is a normal thing.

    This should be applied to the 2.6.36 stable tree.

    Signed-off-by: Sarah Sharp <>
    Reported-by: Lawrence Rust <>
    Signed-off-by: Greg Kroah-Hartman <>

    drivers/usb/host/xhci-ring.c | 1 -
    1 file changed, 1 deletion(-)

    --- a/drivers/usb/host/xhci-ring.c
    +++ b/drivers/usb/host/xhci-ring.c
    @@ -2028,7 +2028,6 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd

    if (!(status & STS_EINT)) {
    - xhci_warn(xhci, "Spurious interrupt.\n");
    return IRQ_NONE;
    xhci_dbg(xhci, "op reg status = %08x\n", status);

     \ /
      Last update: 2010-12-08 02:27    [W:0.019 / U:73.640 seconds]
    ©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site