lkml.org 
[lkml]   [2010]   [Dec]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC/PATCH 2/2] mfd: twl4030-irq: move to threaded_irq
Date
... and while at that, also start using
handle_nested_irq() as we should.

Signed-off-by: Felipe Balbi <balbi@ti.com>
---
drivers/mfd/twl4030-irq.c | 133 ++++++++++++++-------------------------------
1 files changed, 42 insertions(+), 91 deletions(-)

diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c
index 5d3a147..e88d0c6 100644
--- a/drivers/mfd/twl4030-irq.c
+++ b/drivers/mfd/twl4030-irq.c
@@ -278,91 +278,56 @@ static const struct sih sih_modules_twl5031[8] = {

static unsigned twl4030_irq_base;

-static struct completion irq_event;
-
/*
* This thread processes interrupts reported by the Primary Interrupt Handler.
*/
-static int twl4030_irq_thread(void *data)
+static irqreturn_t twl4030_irq_thread(int irq, void *unused)
{
- long irq = (long)data;
- static unsigned i2c_errors;
- static const unsigned max_i2c_errors = 100;
-
-
- current->flags |= PF_NOFREEZE;
-
- while (!kthread_should_stop()) {
- int ret;
- int module_irq;
- u8 pih_isr;
-
- /* Wait for IRQ, then read PIH irq status (also blocking) */
- wait_for_completion_interruptible(&irq_event);
-
- ret = twl_i2c_read_u8(TWL4030_MODULE_PIH, &pih_isr,
- REG_PIH_ISR_P1);
- if (ret) {
- pr_warning("twl4030: I2C error %d reading PIH ISR\n",
- ret);
- if (++i2c_errors >= max_i2c_errors) {
- printk(KERN_ERR "Maximum I2C error count"
- " exceeded. Terminating %s.\n",
- __func__);
- break;
- }
- complete(&irq_event);
- continue;
- }
+ int ret;
+ int module_irq;
+ u8 pih_isr;

- /* these handlers deal with the relevant SIH irq status */
- local_irq_disable();
- for (module_irq = twl4030_irq_base;
- pih_isr;
- pih_isr >>= 1, module_irq++) {
- if (pih_isr & 0x1) {
- struct irq_desc *d = irq_to_desc(module_irq);
-
- if (!d) {
- pr_err("twl4030: Invalid SIH IRQ: %d\n",
- module_irq);
- return -EINVAL;
- }
-
- /* These can't be masked ... always warn
- * if we get any surprises.
- */
- if (d->status & IRQ_DISABLED)
- note_interrupt(module_irq, d,
- IRQ_NONE);
- else
- d->handle_irq(module_irq, d);
+ disable_irq_nosync(irq);
+
+ ret = twl_i2c_read_u8(TWL4030_MODULE_PIH, &pih_isr,
+ REG_PIH_ISR_P1);
+ if (ret) {
+ pr_warning("twl4030: I2C error %d reading PIH ISR\n",
+ ret);
+ return IRQ_NONE;
+ }
+
+ /* these handlers deal with the relevant SIH irq status */
+ local_irq_disable();
+ for (module_irq = twl4030_irq_base;
+ pih_isr;
+ pih_isr >>= 1, module_irq++) {
+ if (pih_isr & 0x1) {
+ struct irq_desc *d = irq_to_desc(module_irq);
+
+ if (!d) {
+ pr_err("twl4030: Invalid SIH IRQ: %d\n",
+ module_irq);
+ return IRQ_NONE;
}
- }
- local_irq_enable();

- enable_irq(irq);
+ /* These can't be masked ... always warn
+ * if we get any surprises.
+ */
+ if (d->status & IRQ_DISABLED)
+ note_interrupt(module_irq, d,
+ IRQ_NONE);
+ else
+ handle_nested_irq(module_irq);
+ }
}

+ local_irq_enable();
+ enable_irq(irq);
+
return 0;
}

-/*
- * handle_twl4030_pih() is the desc->handle method for the twl4030 interrupt.
- * This is a chained interrupt, so there is no desc->action method for it.
- * Now we need to query the interrupt controller in the twl4030 to determine
- * which module is generating the interrupt request. However, we can't do i2c
- * transactions in interrupt context, so we must defer that work to a kernel
- * thread. All we do here is acknowledge and mask the interrupt and wakeup
- * the kernel thread.
- */
-static irqreturn_t handle_twl4030_pih(int irq, void *devid)
-{
- /* Acknowledge, clear *AND* mask the interrupt... */
- disable_irq_nosync(irq);
- complete(devid);
- return IRQ_HANDLED;
-}
/*----------------------------------------------------------------------*/

/*
@@ -788,7 +753,6 @@ int twl4030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)

int status;
int i;
- struct task_struct *task;

/*
* Mask and clear all TWL4030 interrupts since initially we do
@@ -830,28 +794,15 @@ int twl4030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)
goto fail;
}

- /* install an irq handler to demultiplex the TWL4030 interrupt */
-
-
- init_completion(&irq_event);
-
- status = request_irq(irq_num, handle_twl4030_pih, IRQF_DISABLED,
- "TWL4030-PIH", &irq_event);
+ status = request_threaded_irq(irq_num, NULL, twl4030_irq_thread,
+ IRQF_DISABLED, "TWL4030-PIH", NULL);
if (status < 0) {
pr_err("twl4030: could not claim irq%d: %d\n", irq_num, status);
goto fail_rqirq;
}

- task = kthread_run(twl4030_irq_thread, (void *)(long)irq_num,
- "twl4030-irq");
- if (IS_ERR(task)) {
- pr_err("twl4030: could not create irq %d thread!\n", irq_num);
- status = PTR_ERR(task);
- goto fail_kthread;
- }
- return status;
-fail_kthread:
- free_irq(irq_num, &irq_event);
+ return 0;
+
fail_rqirq:
/* clean up twl4030_sih_setup */
fail:
--
1.7.3.4.598.g85356


\
 
 \ /
  Last update: 2010-12-28 15:03    [W:0.064 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site