lkml.org 
[lkml]   [2010]   [Dec]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC] sdhci: use ios->clock to know when sdhci is idle
Date
This allows sdhci to detect its own activity and to autosuspend
when not used

inspired from mmci: handle clock frequency 0 properly
From Linus Walleij <linus.walleij@stericsson.com>
author of mmc aggressive clock gating fw.

The idea of using mmc clock gating fw in order to power gate the
sdhci is simple (hope no too simplistic):
Whenever the mmc fw tells we dont need the MMC clock, we dont need
the sdhci power as well.

This does not mean that the child (card) is
suspended. In case of a Wifi SDIO card, the card will be suspended
and resumed according to the ifconfig up/down status.
Even if the Wifi interface is up, user might not use the network.
Sdhci can be powered off during those period. It is up to the HW
implementation to implement smart enough power gating to still
support enough always-on circuitry allowing to detect sdio
interrupts.

This patch goes on top of Yunpeng's patch available on patchwork:
378052 [v2,2/3] mmc: enable runtime PM support of sdhci host controller

CC: Chris Ball <cjb@laptop.org>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Alan Cox <alan@linux.intel.com>
CC: Takashi Iwai <tiwai@suse.de>
CC: Maxim Levitsky <maximlevitsky@gmail.com>
CC: Linus Walleij <linus.walleij@stericsson.com>
CC: Ohad Ben-Cohen <ohad@wizery.com>
CC: Yunpeng Gao <yunpeng.gao@intel.com>

Signed-off-by: Pierre Tardy <tardyp@gmail.com>
---
drivers/mmc/host/sdhci.c | 20 ++++++++++++++++++++
include/linux/mmc/sdhci.h | 1 +
2 files changed, 21 insertions(+), 0 deletions(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index a298fb0..a648330 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1161,6 +1161,7 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct sdhci_host *host;
unsigned long flags;
+ unsigned int lastclock;
u8 ctrl;

host = mmc_priv(mmc);
@@ -1171,6 +1172,24 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
goto out;

/*
+ * get/put runtime_pm usage counter at ios->clock transitions
+ * We need to do it before any other chip access, as sdhci could
+ * be power gated
+ */
+ lastclock = host->iosclock;
+ host->iosclock = ios->clock;
+ if (lastclock == 0 && ios->clock != 0) {
+ spin_unlock_irqrestore(&host->lock, flags);
+ pm_runtime_get_sync(&host->parent.dev);
+ spin_lock_irqsave(&host->lock, flags);
+ } else if (lastclock != 0 && ios->clock == 0) {
+ spin_unlock_irqrestore(&host->lock, flags);
+ pm_runtime_put_autosuspend(&host->parent.dev);
+ spin_lock_irqsave(&host->lock, flags);
+ /* no need to configure the rest.. */
+ goto out;
+ }
+ /*
* Reset the chip on each power off.
* Should clear out any weird states.
*/
@@ -1779,6 +1798,7 @@ struct sdhci_host *sdhci_alloc_host(struct device *dev,

host = mmc_priv(mmc);
host->mmc = mmc;
+ host->iosclock = 0;

return host;
}
diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
index 0d953f5..78c1528 100644
--- a/include/linux/mmc/sdhci.h
+++ b/include/linux/mmc/sdhci.h
@@ -114,6 +114,7 @@ struct sdhci_host {
unsigned int timeout_clk; /* Timeout freq (KHz) */

unsigned int clock; /* Current clock (MHz) */
+ unsigned int iosclock; /* Last clock asked via set_ios */
u8 pwr; /* Current voltage */

struct mmc_request *mrq; /* Current request */
--
1.7.1


\
 
 \ /
  Last update: 2010-12-22 14:23    [W:0.121 / U:0.628 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site