lkml.org 
[lkml]   [2010]   [Dec]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 5/5] msm: add SMP support for msm
Date
Signed-off-by: Jeff Ohlstein <johlstei@codeaurora.org>
---
arch/arm/mach-msm/Kconfig | 1 +
arch/arm/mach-msm/Makefile | 1 +
arch/arm/mach-msm/headsmp.S | 40 ++++++++++
arch/arm/mach-msm/platsmp.c | 166 +++++++++++++++++++++++++++++++++++++++++++
4 files changed, 208 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-msm/headsmp.S
create mode 100644 arch/arm/mach-msm/platsmp.c

diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index ab5338f..8c57425 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -40,6 +40,7 @@ config ARCH_MSM8X60
bool "MSM8X60"
select MACH_MSM8X60_SURF if (!MACH_MSM8X60_RUMI3 && !MACH_MSM8X60_SIM \
&& !MACH_MSM8X60_FFA)
+ select ARCH_MSM_SCORPIONMP
select ARM_GIC
select CPU_V7
select MSM_V2_TLMM
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index 7a11b4a..1945f9c 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_MSM_SMD) += last_radio_log.o
obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.o

obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
+obj-$(CONFIG_SMP) += headsmp.o platsmp.o

obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o
obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
diff --git a/arch/arm/mach-msm/headsmp.S b/arch/arm/mach-msm/headsmp.S
new file mode 100644
index 0000000..d0c2143
--- /dev/null
+++ b/arch/arm/mach-msm/headsmp.S
@@ -0,0 +1,40 @@
+/*
+ * linux/arch/arm/mach-realview/headsmp.S
+ *
+ * Copyright (c) 2003 ARM Limited
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+ __INIT
+
+/*
+ * MSM specific entry point for secondary CPUs. This provides
+ * a "holding pen" into which all secondary cores are held until we're
+ * ready for them to initialise.
+ */
+ENTRY(msm_secondary_startup)
+ mrc p15, 0, r0, c0, c0, 5
+ and r0, r0, #15
+ adr r4, 1f
+ ldmia r4, {r5, r6}
+ sub r4, r4, r5
+ add r6, r6, r4
+pen: ldr r7, [r6]
+ cmp r7, r0
+ bne pen
+
+ /*
+ * we've been released from the holding pen: secondary_stack
+ * should now contain the SVC stack for this core
+ */
+ b secondary_startup
+
+ .align
+1: .long .
+ .long pen_release
diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c
new file mode 100644
index 0000000..0f427bc
--- /dev/null
+++ b/arch/arm/mach-msm/platsmp.c
@@ -0,0 +1,166 @@
+/*
+ * Copyright (C) 2002 ARM Ltd.
+ * All Rights Reserved
+ * Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/jiffies.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+
+#include <asm/hardware/gic.h>
+#include <asm/cacheflush.h>
+#include <asm/mach-types.h>
+
+#include <mach/msm_iomap.h>
+
+#include "scm-boot.h"
+
+#define VDD_SC1_ARRAY_CLAMP_GFS_CTL 0x15A0
+#define SCSS_CPU1CORE_RESET 0xD80
+#define SCSS_DBG_STATUS_CORE_PWRDUP 0xE64
+
+/* Mask for edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */
+#define GIC_PPI_EDGE_MASK 0xFFFFD7FF
+
+extern void msm_secondary_startup(void);
+/*
+ * control for which core is the next to come out of the secondary
+ * boot "holding pen".
+ */
+volatile int pen_release = -1;
+
+static DEFINE_SPINLOCK(boot_lock);
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+ /* Configure edge-triggered PPIs */
+ writel(GIC_PPI_EDGE_MASK, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4);
+
+ /*
+ * if any interrupts are already enabled for the primary
+ * core (e.g. timer irq), then they will not have been enabled
+ * for us: do so
+ */
+ gic_secondary_init(0);
+
+ /*
+ * let the primary processor know we're out of the
+ * pen, then head off into the C entry point
+ */
+ pen_release = -1;
+ smp_wmb();
+
+ /*
+ * Synchronise with the boot thread.
+ */
+ spin_lock(&boot_lock);
+ spin_unlock(&boot_lock);
+}
+
+static __cpuinit void prepare_cold_cpu(unsigned int cpu)
+{
+ int ret;
+ ret = scm_set_boot_addr(virt_to_phys(msm_secondary_startup),
+ SCM_FLAG_COLDBOOT_CPU1);
+ if (ret == 0) {
+ void *sc1_base_ptr;
+ sc1_base_ptr = ioremap_nocache(0x00902000, SZ_4K*2);
+ if (sc1_base_ptr) {
+ writel(0, sc1_base_ptr + VDD_SC1_ARRAY_CLAMP_GFS_CTL);
+ writel(0, sc1_base_ptr + SCSS_CPU1CORE_RESET);
+ writel(3, sc1_base_ptr + SCSS_DBG_STATUS_CORE_PWRDUP);
+ iounmap(sc1_base_ptr);
+ }
+ } else
+ printk(KERN_DEBUG "Failed to set secondary core boot "
+ "address\n");
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ unsigned long timeout;
+ static int cold_boot_done;
+
+ /* Only need to bring cpu out of reset this way once */
+ if (cold_boot_done == false) {
+ prepare_cold_cpu(cpu);
+ cold_boot_done = true;
+ }
+
+ /*
+ * set synchronisation state between this boot processor
+ * and the secondary one
+ */
+ spin_lock(&boot_lock);
+
+ /*
+ * The secondary processor is waiting to be released from
+ * the holding pen - release it, then wait for it to flag
+ * that it has been released by resetting pen_release.
+ *
+ * Note that "pen_release" is the hardware CPU ID, whereas
+ * "cpu" is Linux's internal ID.
+ */
+ pen_release = cpu;
+ __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
+ outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
+
+ /*
+ * Send the secondary CPU a soft interrupt, thereby causing
+ * the boot monitor to read the system wide flags register,
+ * and branch to the address found there.
+ */
+ smp_cross_call(cpumask_of(cpu), 1);
+
+ timeout = jiffies + (1 * HZ);
+ while (time_before(jiffies, timeout)) {
+ smp_rmb();
+ if (pen_release == -1)
+ break;
+
+ udelay(10);
+ }
+
+ /*
+ * now the secondary core is starting up let it run its
+ * calibrations, then wait for it to finish
+ */
+ spin_unlock(&boot_lock);
+
+ return pen_release != -1 ? -ENOSYS : 0;
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system. The msm8x60
+ * does not support the ARM SCU, so just set the possible cpu mask to
+ * NR_CPUS.
+ */
+void __init smp_init_cpus(void)
+{
+ unsigned int i;
+
+ for (i = 0; i < NR_CPUS; i++)
+ set_cpu_possible(i, true);
+}
+
+void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+{
+ int i;
+
+ /*
+ * Initialise the present map, which describes the set of CPUs
+ * actually populated at the present time.
+ */
+ for (i = 0; i < max_cpus; i++)
+ set_cpu_present(i, true);
+}
--
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.


\
 
 \ /
  Last update: 2010-12-17 09:33    [W:0.141 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site