lkml.org 
[lkml]   [2010]   [Dec]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 9/9] ARM i.MX51 babbage: Add framebuffer support
From
2010/12/13 Sascha Hauer <s.hauer@pengutronix.de>:
> On Sun, Dec 12, 2010 at 09:37:38AM +0800, Liu Ying wrote:
>> Hello, Sascha,
>>
>> I have following 3 comments to this patch:
>> 1) I think DISP1_DATx pins need not be set specially, as they keep the
>> default register values.
>
> We do not want to depend on default register values in the Linux Kernel.
[LY] Ok. Please add disp1 related pins configuration, including
DISP1_HSYNC, DISP1_VSYNC and DISP1_CLK.
It will be fine to add disp2 related pins configuration also.
>
>> 2) Please define 'MX51_PAD_DI_GP4__IPU_DI2_PIN15' in
>> arch/arm/plat-mxc/include/mach/iomux-mx51.h, and rename the pin to be
>> 'MX51_PAD_DI_GP4__DI2_PIN15', as we name it according to the MX51
>> iomux reference manual.
>
> I'm not sure. Normally it's good practice to code the unit into the
> name. Otherwise we end up with names like MX51_PAD_xyz__TX which could
> be the tx pin of just about any unit.
>
>
>> 3) It is better to exchange the following two lines or just remove the
>> first line:
>> +       gpio_set_value(GPIO_DVI_RESET, 0);
>> +       gpio_direction_output(GPIO_DVI_RESET, 0);
>
> ok.
>
> Sascha
>
>
> --
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2010-12-14 07:49    [W:0.062 / U:0.596 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site