lkml.org 
[lkml]   [2010]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] regulator: Convert WM831x drivers to use get_voltage_sel()
Date
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/regulator/wm831x-dcdc.c | 14 +++++++-------
drivers/regulator/wm831x-ldo.c | 18 +++++++++---------
2 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/drivers/regulator/wm831x-dcdc.c b/drivers/regulator/wm831x-dcdc.c
index 71da6b2..8b0d2c4 100644
--- a/drivers/regulator/wm831x-dcdc.c
+++ b/drivers/regulator/wm831x-dcdc.c
@@ -377,14 +377,14 @@ static int wm831x_buckv_set_suspend_voltage(struct regulator_dev *rdev,
return wm831x_set_bits(wm831x, reg, WM831X_DC1_SLP_VSEL_MASK, vsel);
}

-static int wm831x_buckv_get_voltage(struct regulator_dev *rdev)
+static int wm831x_buckv_get_voltage_sel(struct regulator_dev *rdev)
{
struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);

if (dcdc->dvs_gpio && dcdc->dvs_gpio_state)
- return wm831x_buckv_list_voltage(rdev, dcdc->dvs_vsel);
+ return dcdc->dvs_vsel;
else
- return wm831x_buckv_list_voltage(rdev, dcdc->on_vsel);
+ return dcdc->on_vsel;
}

/* Current limit options */
@@ -426,7 +426,7 @@ static int wm831x_buckv_get_current_limit(struct regulator_dev *rdev)

static struct regulator_ops wm831x_buckv_ops = {
.set_voltage = wm831x_buckv_set_voltage,
- .get_voltage = wm831x_buckv_get_voltage,
+ .get_voltage_sel = wm831x_buckv_get_voltage_sel,
.list_voltage = wm831x_buckv_list_voltage,
.set_suspend_voltage = wm831x_buckv_set_suspend_voltage,
.set_current_limit = wm831x_buckv_set_current_limit,
@@ -678,7 +678,7 @@ static int wm831x_buckp_set_suspend_voltage(struct regulator_dev *rdev,
return wm831x_buckp_set_voltage_int(rdev, reg, uV, uV, &selector);
}

-static int wm831x_buckp_get_voltage(struct regulator_dev *rdev)
+static int wm831x_buckp_get_voltage_sel(struct regulator_dev *rdev)
{
struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
struct wm831x *wm831x = dcdc->wm831x;
@@ -689,12 +689,12 @@ static int wm831x_buckp_get_voltage(struct regulator_dev *rdev)
if (val < 0)
return val;

- return wm831x_buckp_list_voltage(rdev, val & WM831X_DC3_ON_VSEL_MASK);
+ return val & WM831X_DC3_ON_VSEL_MASK;
}

static struct regulator_ops wm831x_buckp_ops = {
.set_voltage = wm831x_buckp_set_voltage,
- .get_voltage = wm831x_buckp_get_voltage,
+ .get_voltage_sel = wm831x_buckp_get_voltage_sel,
.list_voltage = wm831x_buckp_list_voltage,
.set_suspend_voltage = wm831x_buckp_set_suspend_voltage,

diff --git a/drivers/regulator/wm831x-ldo.c b/drivers/regulator/wm831x-ldo.c
index 9594e71..c94fc5b 100644
--- a/drivers/regulator/wm831x-ldo.c
+++ b/drivers/regulator/wm831x-ldo.c
@@ -160,7 +160,7 @@ static int wm831x_gp_ldo_set_suspend_voltage(struct regulator_dev *rdev,
return wm831x_gp_ldo_set_voltage_int(rdev, reg, uV, uV, &selector);
}

-static int wm831x_gp_ldo_get_voltage(struct regulator_dev *rdev)
+static int wm831x_gp_ldo_get_voltage_sel(struct regulator_dev *rdev)
{
struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
struct wm831x *wm831x = ldo->wm831x;
@@ -173,7 +173,7 @@ static int wm831x_gp_ldo_get_voltage(struct regulator_dev *rdev)

ret &= WM831X_LDO1_ON_VSEL_MASK;

- return wm831x_gp_ldo_list_voltage(rdev, ret);
+ return ret;
}

static unsigned int wm831x_gp_ldo_get_mode(struct regulator_dev *rdev)
@@ -293,7 +293,7 @@ static unsigned int wm831x_gp_ldo_get_optimum_mode(struct regulator_dev *rdev,

static struct regulator_ops wm831x_gp_ldo_ops = {
.list_voltage = wm831x_gp_ldo_list_voltage,
- .get_voltage = wm831x_gp_ldo_get_voltage,
+ .get_voltage_sel = wm831x_gp_ldo_get_voltage_sel,
.set_voltage = wm831x_gp_ldo_set_voltage,
.set_suspend_voltage = wm831x_gp_ldo_set_suspend_voltage,
.get_mode = wm831x_gp_ldo_get_mode,
@@ -465,7 +465,7 @@ static int wm831x_aldo_set_suspend_voltage(struct regulator_dev *rdev,
return wm831x_aldo_set_voltage_int(rdev, reg, uV, uV, &selector);
}

-static int wm831x_aldo_get_voltage(struct regulator_dev *rdev)
+static int wm831x_aldo_get_voltage_sel(struct regulator_dev *rdev)
{
struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
struct wm831x *wm831x = ldo->wm831x;
@@ -478,7 +478,7 @@ static int wm831x_aldo_get_voltage(struct regulator_dev *rdev)

ret &= WM831X_LDO7_ON_VSEL_MASK;

- return wm831x_aldo_list_voltage(rdev, ret);
+ return ret;
}

static unsigned int wm831x_aldo_get_mode(struct regulator_dev *rdev)
@@ -559,7 +559,7 @@ static int wm831x_aldo_get_status(struct regulator_dev *rdev)

static struct regulator_ops wm831x_aldo_ops = {
.list_voltage = wm831x_aldo_list_voltage,
- .get_voltage = wm831x_aldo_get_voltage,
+ .get_voltage_sel = wm831x_aldo_get_voltage_sel,
.set_voltage = wm831x_aldo_set_voltage,
.set_suspend_voltage = wm831x_aldo_set_suspend_voltage,
.get_mode = wm831x_aldo_get_mode,
@@ -718,7 +718,7 @@ static int wm831x_alive_ldo_set_suspend_voltage(struct regulator_dev *rdev,
return wm831x_alive_ldo_set_voltage_int(rdev, reg, uV, uV, &selector);
}

-static int wm831x_alive_ldo_get_voltage(struct regulator_dev *rdev)
+static int wm831x_alive_ldo_get_voltage_sel(struct regulator_dev *rdev)
{
struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
struct wm831x *wm831x = ldo->wm831x;
@@ -731,7 +731,7 @@ static int wm831x_alive_ldo_get_voltage(struct regulator_dev *rdev)

ret &= WM831X_LDO11_ON_VSEL_MASK;

- return wm831x_alive_ldo_list_voltage(rdev, ret);
+ return ret;
}

static int wm831x_alive_ldo_get_status(struct regulator_dev *rdev)
@@ -753,7 +753,7 @@ static int wm831x_alive_ldo_get_status(struct regulator_dev *rdev)

static struct regulator_ops wm831x_alive_ldo_ops = {
.list_voltage = wm831x_alive_ldo_list_voltage,
- .get_voltage = wm831x_alive_ldo_get_voltage,
+ .get_voltage_sel = wm831x_alive_ldo_get_voltage_sel,
.set_voltage = wm831x_alive_ldo_set_voltage,
.set_suspend_voltage = wm831x_alive_ldo_set_suspend_voltage,
.get_status = wm831x_alive_ldo_get_status,
--
1.7.1


\
 
 \ /
  Last update: 2010-12-10 18:31    [from the cache]
©2003-2011 Jasper Spaans