lkml.org 
[lkml]   [2010]   [Dec]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v16 17/17]An example how to alloc user buffer based on napi_gro_frags() interface.
Date
From: Xin Xiaohui <xiaohui.xin@intel.com>

This example is made on ixgbe driver which using napi_gro_frags().
It can get buffers from guest side directly using netdev_alloc_page()
and release guest buffers using netdev_free_page().

Signed-off-by: Xin Xiaohui <xiaohui.xin@intel.com>
---
drivers/net/ixgbe/ixgbe_main.c | 37 +++++++++++++++++++++++++++++++++----
1 files changed, 33 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index cd69080..807a51e 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -1032,7 +1032,14 @@ static inline void ixgbe_release_rx_desc(struct ixgbe_hw *hw,
static bool is_rx_buffer_mapped_as_page(struct ixgbe_rx_buffer *bi,
struct net_device *dev)
{
- return true;
+ return dev_is_mpassthru(dev);
+}
+
+static u32 get_page_skb_offset(struct net_device *dev)
+{
+ if (!dev_is_mpassthru(dev))
+ return 0;
+ return dev->mp_port->vnet_hlen;
}

/**
@@ -1105,7 +1112,8 @@ static void ixgbe_alloc_rx_buffers(struct ixgbe_adapter *adapter,
adapter->alloc_rx_page_failed++;
goto no_buffers;
}
- bi->page_skb_offset = 0;
+ bi->page_skb_offset =
+ get_page_skb_offset(adapter->netdev);
bi->dma = dma_map_page(&pdev->dev, bi->page_skb,
bi->page_skb_offset,
(PAGE_SIZE / 2),
@@ -1242,8 +1250,10 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
len = le16_to_cpu(rx_desc->wb.upper.length);
}

- if (is_no_buffer(rx_buffer_info))
+ if (is_no_buffer(rx_buffer_info)) {
+ printk("no buffers\n");
break;
+ }
cleaned = true;

if (!rx_buffer_info->mapped_as_page) {
@@ -1305,6 +1315,11 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
rx_buffer_info->page_skb,
rx_buffer_info->page_skb_offset,
len);
+ if (dev_is_mpassthru(netdev) &&
+ netdev->mp_port->hash)
+ skb_shinfo(skb)->destructor_arg =
+ netdev->mp_port->hash(netdev,
+ rx_buffer_info->page_skb);
rx_buffer_info->page_skb = NULL;
skb->len += len;
skb->data_len += len;
@@ -1322,7 +1337,8 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
upper_len);

if ((rx_ring->rx_buf_len > (PAGE_SIZE / 2)) ||
- (page_count(rx_buffer_info->page) != 1))
+ (page_count(rx_buffer_info->page) != 1) ||
+ dev_is_mpassthru(netdev))
rx_buffer_info->page = NULL;
else
get_page(rx_buffer_info->page);
@@ -6535,6 +6551,16 @@ static void ixgbe_netpoll(struct net_device *netdev)
}
#endif

+#if defined(CONFIG_MEDIATE_PASSTHRU) || defined(CONFIG_MEDIATE_PASSTHRU_MODULE)
+static int ixgbe_ndo_mp_port_prep(struct net_device *dev, struct mp_port *port)
+{
+ port->hdr_len = 128;
+ port->data_len = 2048;
+ port->npages = 1;
+ return 0;
+}
+#endif
+
static const struct net_device_ops ixgbe_netdev_ops = {
.ndo_open = ixgbe_open,
.ndo_stop = ixgbe_close,
@@ -6554,6 +6580,9 @@ static const struct net_device_ops ixgbe_netdev_ops = {
.ndo_set_vf_vlan = ixgbe_ndo_set_vf_vlan,
.ndo_set_vf_tx_rate = ixgbe_ndo_set_vf_bw,
.ndo_get_vf_config = ixgbe_ndo_get_vf_config,
+#if defined(CONFIG_MEDIATE_PASSTHRU) || defined(CONFIG_MEDIATE_PASSTHRU_MODULE)
+ .ndo_mp_port_prep = ixgbe_ndo_mp_port_prep,
+#endif
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = ixgbe_netpoll,
#endif
--
1.7.3


\
 
 \ /
  Last update: 2010-12-01 08:49    [W:0.077 / U:0.020 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site