lkml.org 
[lkml]   [2010]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH/RFC] core: add a function to safely try to get device driver owner
Date
On Tuesday, November 30, 2010 21:43:09 Laurent Pinchart wrote:
> Hi Greg,
>
> On Tuesday 30 November 2010 19:32:25 Greg KH wrote:
> > On Tue, Nov 30, 2010 at 06:55:54PM +0100, Laurent Pinchart wrote:
> > > On Tuesday 30 November 2010 18:15:09 Greg KH wrote:
> > > > On Tue, Nov 30, 2010 at 06:09:46PM +0100, Guennadi Liakhovetski wrote:
> > > > > On Tue, 30 Nov 2010, Greg KH wrote:
> > > > > > On Tue, Nov 30, 2010 at 12:11:42AM +0100, Guennadi Liakhovetski
> wrote:
> > > > > > > On Mon, 29 Nov 2010, Greg KH wrote:
> > > > > > > > On Mon, Nov 29, 2010 at 11:10:50PM +0100, Guennadi Liakhovetski
> > >
> > > wrote:
> > > > > > > > > On Mon, 29 Nov 2010, Greg KH wrote:
> > > [snip]
> > >
> > > > > > > > > > Wait, what? The device is already bound to a driver,
> > > > > > > > > > right, so why would you care about "locking" the module
> > > > > > > > > > into memory? What could this possibly be used for?
> > > > > > > > >
> > > > > > > > > To protect against rmmod -> driver_unregister -> dev->driver
> > > > > > > > > = NULL?
> > > > > > > >
> > > > > > > > But again, why would some other driver ever care about what
> > > > > > > > some random dev->driver would be?
> > > > > > >
> > > > > > > It's not a random one, call it a "companion device."
> > > > > >
> > > > > > Ok, but again go back to Jon's original proposal to just call the
> > > > > > functions in that driver from yours, causing the implicit module
> > > > > > ordering issue to be automatically resolved.
> > > > >
> > > > > Greg, in this specific case - yes, I could do this. But (1) there is
> > > > > no need for that - both drivers implement and use the v4l2-subdev
> > > > > API and thus stay generic. In the host driver this adds the
> > > > > convenience, that it doesn't have to call to the CSI2 driver
> > > > > explicitly at all - it just calls the v4l2-subdev function like
> > > > > "call .s_mbus_fmt for all subdev drivers" and the function is called
> > > > > for the sensor and the CSI2 driver. (2) what about the other
> > > > > location I pointed out earlier in the v4l2 core? There drivers are
> > > > > absolutely generic. I also suspect these are not the only cases,
> > > > > where this helper would come in handy. I added the media list to CC
> > > > > for any more opinions on this matter.
> > > >
> > > > I agree, it probably would not solve all of the different issues that
> > > > people might have for this type of thing, and this isn't the first time
> > > > I've heard it be requested either.
> > > >
> > > > But, this patch is just trying to increment a module owner of a device
> > > > that is bound to a driver, which is the wrong level to be thinking of
> > > > it.
> > > >
> > > > If you request a module to be loaded, what would possibly cause it to
> > > > be unbound that you need to have this "safely" in place? Why would
> > > > the module be unloaded? And if it was unloaded, doesn't that imply
> > > > that someone else wanted it unloaded so keeping that from happening
> > > > would be a bit rude, right?
> > >
> > > It depends on your definition of rude. I would consider the kernel even
> > > more rude if it accepted my unload request and then crashed.
> >
> > I totally agree, and that is a bug that should be fixed, but shouldn't
> > have anything to do with this proposed interface (i.e. locking the
> > module in place is not the proper fix.)
> >
> > > I've recently run into a problem similar to Guennadi's with the OMAP3 ISP
> > > driver. The driver instantiates several V4L2 I2C sub-devices for the
> > > camera sensors and the lens and flash controllers. The sub-device
> > > drivers get platform data when they're probed, and receive callbacks to
> > > the board code to turn power on/off and configure clocks (it's a bit
> > > more complex than just that, but you get the idea). The board code
> > > callbacks then call to the OMAP3 ISP driver to configure clocks, because
> > > the sensor clock is provided by the OMAP3 ISP.
> > >
> > > Now, when the user opens the sensor's subdev device node
> > > (/dev/v4l-subdev*), the subdev open function will turn the sensor clock
> > > on. To do that it will call the OMAP3 ISP driver through board code. If
> > > the OMAP3 ISP driver is unloaded at that point things will go pretty
> > > bad.
> >
> > Then the interface to call that driver should be properly reference
> > counted, right? That has nothing to do with the driver core locking
> > modules into place.
> >
> > > The way we deal with this is to try_module_get() on the OMAP3 ISP driver
> > > in the subdev open() handlers. I'm of course opened to alternatives.
> >
> > Do it like the rest of the kernel does it, lock the module in place with
> > the module pointer it passed to you before calling open in that module.
> > Nothing new here at all.
>
> That doesn't work in this case, because we have two modules. Module A is the
> master and instantiates an I2C device handled by module B. Module B creates a
> character device and sets itself as the owner. When the corresponding device
> node is opened, module B's refcount is incremented, but module A refcount
> isn't, even though module B can call to module A through board code using
> function pointers provided in the platform data.

All this is pretty easy to add to the way subdevs are handled in v4l. The reason
nothing along those lines has been implemented yet is simply that it isn't
necessary at the moment. But once subdevs can have device nodes, then we need to
add it.

This definitely does not belong to the kernel core, it's a v4l core framework
thing.

Regards,

Hans

--
Hans Verkuil - video4linux developer - sponsored by Cisco


\
 
 \ /
  Last update: 2010-11-30 23:21    [W:0.126 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site