lkml.org 
[lkml]   [2010]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    Date
    From
    Subject[1/8, v6] NUMA Hotplug Emulator: documentation
    From: Shaohui Zheng <shaohui.zheng@intel.com>

    add a text file Documentation/x86/x86_64/numa_hotplug_emulator.txt
    to explain the usage for the hotplug emulator.

    Reviewed-By: Randy Dunlap <randy.dunlap@oracle.com>
    Signed-off-by: Haicheng Li <haicheng.li@intel.com>
    Signed-off-by: Shaohui Zheng <shaohui.zheng@intel.com>
    ---
    Index: linux-hpe4/Documentation/x86/x86_64/numa_hotplug_emulator.txt
    ===================================================================
    --- /dev/null 1970-01-01 00:00:00.000000000 +0000
    +++ linux-hpe4/Documentation/x86/x86_64/numa_hotplug_emulator.txt 2010-11-30 09:48:52.257622002 +0800
    @@ -0,0 +1,104 @@
    +NUMA Hotplug Emulator for x86_64
    +---------------------------------------------------
    +
    +NUMA hotplug emulator is able to emulate NUMA Node Hotplug
    +thru a pure software way. It intends to help people easily debug
    +and test node/CPU/memory hotplug related stuff on a
    +none-NUMA-hotplug-support machine, even a UMA machine and virtual
    +environment.
    +
    +1) Node hotplug emulation:
    +
    +Adds a numa=possible=<N> command line option to set an additional N nodes
    +as being possible for memory hotplug. This set of possible nodes
    +control nr_node_ids and the sizes of several dynamically allocated node
    +arrays.
    +
    +This allows memory hotplug to create new nodes for newly added memory
    +rather than binding it to existing nodes.
    +
    +For emulation on x86, it would be possible to set aside memory for hotplugged
    +nodes (say, anything above 2G) and to add an additional four nodes as being
    +possible on boot with
    +
    + mem=2G numa=possible=4
    +
    +and then creating a new 128M node at runtime:
    +
    + # echo 128M@0x80000000 > /sys/kernel/debug/node/add_node
    + On node 1 totalpages: 0
    + init_memory_mapping: 0000000080000000-0000000088000000
    + 0080000000 - 0088000000 page 2M
    +
    +Once the new node has been added, its memory can be onlined. If this
    +memory represents memory section 16, for example:
    +
    + # echo online > /sys/devices/system/memory/memory16/state
    + Built 2 zonelists in Node order, mobility grouping on. Total pages: 514846
    + Policy zone: Normal
    + [ The memory section(s) mapped to a particular node are visible via
    + /sys/devices/system/node/node1, in this example. ]
    +
    +2) CPU hotplug emulation:
    +
    +The emulator reserve CPUs throu grub parameter, the reserved CPUs can be
    +hot-add/hot-remove in software method, it emulates the process of physical
    +cpu hotplug.
    +
    +When hotplugging a CPU with emulator, we are using a logical CPU to emulate the CPU
    +socket hotplug process. For the CPU supported SMT, some logical CPUs are in the
    +same socket, but it may located in different NUMA node after we have emulator.
    +We put the logical CPU into a fake CPU socket, and assign it a unique
    +phys_proc_id. For the fake socket, we put one logical CPU in only.
    +
    + - to hide CPUs
    + - Using boot option "maxcpus=N" hide CPUs
    + N is the number of CPUs to initialize; the reset will be hidden.
    + - Using boot option "cpu_hpe=on" to enable CPU hotplug emulation
    + when cpu_hpe is enabled, the rest CPUs will not be initialized
    +
    + - to hot-add CPU to node
    + $ echo nid > cpu/probe
    +
    + - to hot-remove CPU
    + $ echo nid > cpu/release
    +
    +3) Memory hotplug emulation:
    +
    +The emulator reserves memory before OS boots, the reserved memory region is
    +removed from e820 table, and they can be hot-added via the probe interface.
    +this interface was extended to support adding memory to the specified node. It
    +maintains backwards compatibility.
    +
    +The difficulty of Memory Release is well-known, we have no plan for it until now.
    +
    + - reserve memory thru a kernel boot paramter
    + mem=1024m
    +
    + - add a memory section to node 3
    + $ echo 0x40000000,3 > memory/probe
    + OR
    + $ echo 1024m,3 > memory/probe
    + OR
    + $ echo "physical_address=0x40000000 numa_node=3" > memory/probe
    +
    +4) Script for hotplug testing
    +
    +These scripts provides convenience when we hot-add memory/cpu in batch.
    +
    +- Online all memory sections:
    +for m in /sys/devices/system/memory/memory*;
    +do
    + echo online > $m/state;
    +done
    +
    +- CPU Online:
    +for c in /sys/devices/system/cpu/cpu*;
    +do
    + echo 1 > $c/online;
    +done
    +
    +- David Rientjes <rientjes@google.com>
    +- Haicheng Li <haicheng.li@intel.com>
    +- Shaohui Zheng <shaohui.zheng@intel.com>
    + Nov 2010
    --
    Thanks & Regards,
    Shaohui




    \
     
     \ /
      Last update: 2010-11-30 09:47    [W:0.028 / U:118.180 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site