lkml.org 
[lkml]   [2010]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH 3/5] powerpc/5200: dts: remove unused properties
    On Tue, Nov 16, 2010 at 12:50:10PM -0800, John Bonesio wrote:
    > This patch remove unused properties in dts files in preparation of refactoring
    > the dts files for MPC5200b based boards.
    >
    > Signed-off-by: John Bonesio <bones@secretlab.ca>
    > ---
    >
    > arch/powerpc/boot/dts/cm5200.dts | 2 --
    > arch/powerpc/boot/dts/lite5200b.dts | 3 ---
    > arch/powerpc/boot/dts/media5200.dts | 2 --
    > arch/powerpc/boot/dts/motionpro.dts | 2 --
    > arch/powerpc/boot/dts/pcm030.dts | 2 --
    > arch/powerpc/boot/dts/pcm032.dts | 2 --
    > 6 files changed, 0 insertions(+), 13 deletions(-)
    >
    > diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts
    > index 9369dcd..d549897 100644
    > --- a/arch/powerpc/boot/dts/cm5200.dts
    > +++ b/arch/powerpc/boot/dts/cm5200.dts
    > @@ -230,8 +230,6 @@
    > reg = <0 0 0x2000000>;
    > bank-width = <2>;
    > device-width = <2>;
    > - #size-cells = <1>;
    > - #address-cells = <1>;
    > };
    > };
    > };
    > diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
    > index a74b790..c0a4e45 100644
    > --- a/arch/powerpc/boot/dts/lite5200b.dts
    > +++ b/arch/powerpc/boot/dts/lite5200b.dts
    > @@ -174,7 +174,6 @@
    >
    > psc@2000 { // PSC1
    > compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
    > - cell-index = <0>;
    > reg = <0x2000 0x100>;
    > interrupts = <2 1 0>;
    > };
    > @@ -198,7 +197,6 @@
    > // PSC4 in uart mode example
    > //serial@2600 { // PSC4
    > // compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
    > - // cell-index = <3>;
    > // reg = <0x2600 0x100>;
    > // interrupts = <2 11 0>;
    > //};
    > @@ -206,7 +204,6 @@
    > // PSC5 in uart mode example
    > //serial@2800 { // PSC5
    > // compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
    > - // cell-index = <4>;
    > // reg = <0x2800 0x100>;
    > // interrupts = <2 12 0>;
    > //};

    How about deleting the commented out nodes entirely since they can now
    be captured in the mpc5200.dtsi file.

    > diff --git a/arch/powerpc/boot/dts/media5200.dts b/arch/powerpc/boot/dts/media5200.dts
    > index a70ef68..e027f45 100644
    > --- a/arch/powerpc/boot/dts/media5200.dts
    > +++ b/arch/powerpc/boot/dts/media5200.dts
    > @@ -185,8 +185,6 @@
    > // PSC6 in uart mode
    > console: psc@2c00 { // PSC6
    > compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
    > - cell-index = <5>;
    > - port-number = <0>; // Logical port assignment
    > reg = <0x2c00 0x100>;
    > interrupts = <2 4 0>;
    > };
    > diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts
    > index f6261ea..3ab4666 100644
    > --- a/arch/powerpc/boot/dts/motionpro.dts
    > +++ b/arch/powerpc/boot/dts/motionpro.dts
    > @@ -277,8 +277,6 @@
    > reg = <0 0 0x01000000>;
    > bank-width = <2>;
    > device-width = <2>;
    > - #size-cells = <1>;
    > - #address-cells = <1>;
    > };
    > };
    > };
    > diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts
    > index 3a4f554..f3e30bb 100644
    > --- a/arch/powerpc/boot/dts/pcm030.dts
    > +++ b/arch/powerpc/boot/dts/pcm030.dts
    > @@ -196,7 +196,6 @@
    >
    > psc@2400 { /* PSC3 in UART mode */
    > compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
    > - cell-index = <2>;
    > reg = <0x2400 0x100>;
    > interrupts = <2 3 0>;
    > };
    > @@ -207,7 +206,6 @@
    >
    > psc@2c00 { /* PSC6 in UART mode */
    > compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
    > - cell-index = <5>;
    > reg = <0x2c00 0x100>;
    > interrupts = <2 4 0>;
    > };
    > diff --git a/arch/powerpc/boot/dts/pcm032.dts b/arch/powerpc/boot/dts/pcm032.dts
    > index 17596c7..e0f2702 100644
    > --- a/arch/powerpc/boot/dts/pcm032.dts
    > +++ b/arch/powerpc/boot/dts/pcm032.dts
    > @@ -196,7 +196,6 @@
    >
    > psc@2400 { /* PSC3 in UART mode */
    > compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
    > - cell-index = <2>;
    > reg = <0x2400 0x100>;
    > interrupts = <2 3 0>;
    > };
    > @@ -207,7 +206,6 @@
    >
    > psc@2c00 { /* PSC6 in UART mode */
    > compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
    > - cell-index = <5>;
    > reg = <0x2c00 0x100>;
    > interrupts = <2 4 0>;
    > };
    >


    \
     
     \ /
      Last update: 2010-11-17 06:07    [W:0.032 / U:179.164 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site