lkml.org 
[lkml]   [2010]   [Nov]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] x86, acpi: Handle all SRAT cpu entries even have cpu num limitation

Recent Intel new system have different order in MADT, aka will list all thread0
at first, then all thread1.
But SRAT table still old order, it will list cpus in one socket all together.

If the user have compiled limited NR_CPUS or boot with nr_cpus=, could have missed
to put some cpus apic id to node mapping into apicid_to_node[].

for example for 4 sockets system with 64 cpus with nr_cpus=32 will get crash...

[ 9.106288] Total of 32 processors activated (136190.88 BogoMIPS).
[ 9.235021] divide error: 0000 [#1] SMP
[ 9.235315] last sysfs file:
[ 9.235481] CPU 1
[ 9.235592] Modules linked in:
[ 9.245398]
[ 9.245478] Pid: 2, comm: kthreadd Not tainted 2.6.37-rc1-tip-yh-01782-ge92ef79-dirty #274 /Sun Fire x4800
[ 9.265415] RIP: 0010:[<ffffffff81075a8f>] [<ffffffff81075a8f>] select_task_rq_fair+0x4f0/0x623
[ 9.265835] RSP: 0000:ffff88103f8d1c40 EFLAGS: 00010046
[ 9.285550] RAX: 0000000000000000 RBX: ffff88103f887de0 RCX: 0000000000000000
[ 9.305356] RDX: 0000000000000000 RSI: 0000000000000200 RDI: 0000000000000200
[ 9.305711] RBP: ffff88103f8d1d10 R08: 0000000000000200 R09: ffff88103f887e38
[ 9.325709] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
[ 9.326038] R13: ffff88107e80dfb0 R14: 0000000000000001 R15: ffff88103f887e40
[ 9.345655] FS: 0000000000000000(0000) GS:ffff88107e800000(0000) knlGS:0000000000000000
[ 9.365503] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 9.365776] CR2: 0000000000000000 CR3: 0000000002417000 CR4: 00000000000006e0
[ 9.385583] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 9.405368] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 9.405713] Process kthreadd (pid: 2, threadinfo ffff88103f8d0000, task ffff88305c8aa2d0)
[ 9.425563] Stack:
[ 9.425668] ffff88103f8d1cb0 0000000000000046 0000000000000000 0000000200000000
[ 9.445509] 0000000000000000 0000000100000000 0000000000000046 ffffffff82bd1ce0
[ 9.465350] 000000015c8aa2d0 00000000001d2540 00000000001d2540 0000007d3f8d1d28
[ 9.465763] Call Trace:
[ 9.465875] [<ffffffff810747c3>] wake_up_new_task+0x3c/0x10e
[ 9.485486] [<ffffffff8107b2e3>] do_fork+0x28c/0x35f
[ 9.485753] [<ffffffff810ab832>] ? __lock_acquire+0x1801/0x1813
[ 9.505474] [<ffffffff8106f2bd>] ? finish_task_switch+0x80/0xf4
[ 9.525264] [<ffffffff8106f286>] ? finish_task_switch+0x49/0xf4
[ 9.525575] [<ffffffff8109da72>] ? local_clock+0x2b/0x3c
[ 9.545281] [<ffffffff8103da76>] kernel_thread+0x70/0x72
[ 9.545544] [<ffffffff81097c83>] ? kthread+0x0/0xa8
[ 9.545797] [<ffffffff81037990>] ? kernel_thread_helper+0x0/0x10
[ 9.565519] [<ffffffff81098099>] kthreadd+0xe8/0x12b
[ 9.585185] [<ffffffff81037994>] kernel_thread_helper+0x4/0x10
[ 9.585485] [<ffffffff81cd793c>] ? restore_args+0x0/0x30
[ 9.605192] [<ffffffff81097fb1>] ? kthreadd+0x0/0x12b
[ 9.605479] [<ffffffff81037990>] ? kernel_thread_helper+0x0/0x10
[ 9.625295] Code: a0 be 00 02 00 00 ff c2 48 63 d2 e8 f8 67 3b 00 3b 05 86 8e 52 01 48 89 c7 89 45 c8 7c c1 48 8b 45 b0 8b 4b 08 31 d2 48 c1 e0 0a <48> f7 f1 45 85 e4 75 08 48 3b 45 b8 72 08 eb 0d 48 89 45 a8 eb
[ 9.645938] RIP [<ffffffff81075a8f>] select_task_rq_fair+0x4f0/0x623
[ 9.665356] RSP <ffff88103f8d1c40>
[ 9.665568] ---[ end trace 2296156d35fdfc87 ]---
So let just parse all cpu entries in SRAT.

Also add apicid checking with MAX_LOCAL_APIC, in case We could out of boundaries of
apicid_to_node[].

it should fix following bug too.
https://bugzilla.kernel.org/show_bug.cgi?id=22662

Reported-and-Tested-by: Wu Fengguang <fengguang.wu@intel.com>
Reported-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>

---
arch/x86/kernel/acpi/boot.c | 7 +++++++
arch/x86/mm/srat_64.c | 8 ++++++++
drivers/acpi/numa.c | 14 ++++++++++++--
3 files changed, 27 insertions(+), 2 deletions(-)
Index: linux-2.6/arch/x86/kernel/acpi/boot.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/acpi/boot.c
+++ linux-2.6/arch/x86/kernel/acpi/boot.c
@@ -198,6 +198,13 @@ static void __cpuinit acpi_register_lapi
{
unsigned int ver = 0;

+#ifdef CONFIG_X86_64
+ if (id >= (MAX_APICS-1)) {
+ printk(KERN_INFO PREFIX "skipped apicid that is too big\n");
+ return;
+ }
+#endif
+
if (!enabled) {
++disabled_cpus;
return;
Index: linux-2.6/arch/x86/mm/srat_64.c
===================================================================
--- linux-2.6.orig/arch/x86/mm/srat_64.c
+++ linux-2.6/arch/x86/mm/srat_64.c
@@ -134,6 +134,10 @@ acpi_numa_x2apic_affinity_init(struct ac
}

apic_id = pa->apic_id;
+ if (apic_id >= MAX_LOCAL_APIC) {
+ printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%04x -> Node %u skipped that apicid too big\n", pxm, apic_id, node);
+ return;
+ }
apicid_to_node[apic_id] = node;
node_set(node, cpu_nodes_parsed);
acpi_numa = 1;
@@ -168,6 +172,10 @@ acpi_numa_processor_affinity_init(struct
apic_id = (pa->apic_id << 8) | pa->local_sapic_eid;
else
apic_id = pa->apic_id;
+ if (apic_id >= MAX_LOCAL_APIC) {
+ printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%02x -> Node %u skipped apicid that is too big\n", pxm, apic_id, node);
+ return;
+ }
apicid_to_node[apic_id] = node;
node_set(node, cpu_nodes_parsed);
acpi_numa = 1;
Index: linux-2.6/drivers/acpi/numa.c
===================================================================
--- linux-2.6.orig/drivers/acpi/numa.c
+++ linux-2.6/drivers/acpi/numa.c
@@ -275,13 +275,23 @@ acpi_table_parse_srat(enum acpi_srat_typ
int __init acpi_numa_init(void)
{
int ret = 0;
+ int nr_cpu_entries = nr_cpu_ids;
+
+#ifdef CONFIG_X86_64
+ /*
+ * Should not limit number with cpu num that will handle,
+ * SRAT cpu entries could have different order with that in MADT.
+ * So go over all cpu entries in SRAT to get apicid to node mapping.
+ */
+ nr_cpu_entries = MAX_LOCAL_APIC;
+#endif

/* SRAT: Static Resource Affinity Table */
if (!acpi_table_parse(ACPI_SIG_SRAT, acpi_parse_srat)) {
acpi_table_parse_srat(ACPI_SRAT_TYPE_X2APIC_CPU_AFFINITY,
- acpi_parse_x2apic_affinity, nr_cpu_ids);
+ acpi_parse_x2apic_affinity, nr_cpu_entries);
acpi_table_parse_srat(ACPI_SRAT_TYPE_CPU_AFFINITY,
- acpi_parse_processor_affinity, nr_cpu_ids);
+ acpi_parse_processor_affinity, nr_cpu_entries);
ret = acpi_table_parse_srat(ACPI_SRAT_TYPE_MEMORY_AFFINITY,
acpi_parse_memory_affinity,
NR_NODE_MEMBLKS);

\
 
 \ /
  Last update: 2010-11-14 02:43    [from the cache]
©2003-2011 Jasper Spaans