lkml.org 
[lkml]   [2010]   [Oct]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 21/28] Staging: comedi: drivers: adq12b.c: Edit file so that checkpatch.pl has 0 errors and 2 warnings
    Date
    Changed a lot lines that made checkpatch.pl complain. Most  warnings were
    WARNING: please, no space for starting a line. The only remainig warnings are
    WARNING: line over 80 characters.

    Signed-off-by: Tracey Dent <tdent48227@gmail.com>
    ---
    drivers/staging/comedi/drivers/adq12b.c | 88 +++++++++++++++---------------
    1 files changed, 44 insertions(+), 44 deletions(-)

    diff --git a/drivers/staging/comedi/drivers/adq12b.c b/drivers/staging/comedi/drivers/adq12b.c
    index 4b47000..6e5f72f 100644
    --- a/drivers/staging/comedi/drivers/adq12b.c
    +++ b/drivers/staging/comedi/drivers/adq12b.c
    @@ -1,23 +1,23 @@
    /*
    - comedi/drivers/adq12b.c
    - driver for MicroAxial ADQ12-B data acquisition and control card
    + comedi/drivers/adq12b.c
    + driver for MicroAxial ADQ12-B data acquisition and control card

    - COMEDI - Linux Control and Measurement Device Interface
    - Copyright (C) 2000 David A. Schleef <ds@schleef.org>
    + COMEDI - Linux Control and Measurement Device Interface
    + Copyright (C) 2000 David A. Schleef <ds@schleef.org>

    - This program is free software; you can redistribute it and/or modify
    - it under the terms of the GNU General Public License as published by
    - the Free Software Foundation; either version 2 of the License, or
    - (at your option) any later version.
    + This program is free software; you can redistribute it and/or modify
    + it under the terms of the GNU General Public License as published by
    + the Free Software Foundation; either version 2 of the License, or
    + (at your option) any later version.

    - This program is distributed in the hope that it will be useful,
    - but WITHOUT ANY WARRANTY; without even the implied warranty of
    - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
    - GNU General Public License for more details.
    + This program is distributed in the hope that it will be useful,
    + but WITHOUT ANY WARRANTY; without even the implied warranty of
    + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
    + GNU General Public License for more details.

    - You should have received a copy of the GNU General Public License
    - along with this program; if not, write to the Free Software
    - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
    + You should have received a copy of the GNU General Public License
    + along with this program; if not, write to the Free Software
    + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.

    */
    /*
    @@ -30,50 +30,50 @@ Status: works

    Driver for the acquisition card ADQ12-B (without any add-on).

    - - Analog input is subdevice 0 (16 channels single-ended or 8 differential)
    - - Digital input is subdevice 1 (5 channels)
    - - Digital output is subdevice 1 (8 channels)
    - - The PACER is not supported in this version
    +- Analog input is subdevice 0 (16 channels single-ended or 8 differential)
    +- Digital input is subdevice 1 (5 channels)
    +- Digital output is subdevice 1 (8 channels)
    +- The PACER is not supported in this version

    If you do not specify any options, they will default to

    - # comedi_config /dev/comedi0 adq12b 0x300,0,0
    + # comedi_config /dev/comedi0 adq12b 0x300,0,0

    - option 1: I/O base address. The following table is provided as a help
    - of the hardware jumpers.
    + option 1: I/O base address. The following table is provided as a help
    + of the hardware jumpers.

    - address jumper JADR
    - 0x300 1 (factory default)
    - 0x320 2
    - 0x340 3
    - 0x360 4
    - 0x380 5
    - 0x3A0 6
    + address jumper JADR
    + 0x300 1 (factory default)
    + 0x320 2
    + 0x340 3
    + 0x360 4
    + 0x380 5
    + 0x3A0 6

    - option 2: unipolar/bipolar ADC selection: 0 -> bipolar, 1 -> unipolar
    + option 2: unipolar/bipolar ADC selection: 0 -> bipolar, 1 -> unipolar

    selection comedi_config option JUB
    bipolar 0 2-3 (factory default)
    unipolar 1 1-2

    - option 3: single-ended/differential AI selection: 0 -> SE, 1 -> differential
    + option 3: single-ended/differential AI selection: 0 -> SE, 1 -> differential

    selection comedi_config option JCHA JCHB
    - single-ended 0 1-2 1-2 (factory default)
    - differential 1 2-3 2-3
    + single-ended 0 1-2 1-2 (factory default)
    + differential 1 2-3 2-3

    - written by jeremy theler <thelerg@ib.cnea.gov.ar>
    + written by jeremy theler <thelerg@ib.cnea.gov.ar>

    - instituto balseiro
    - comision nacional de energia atomica
    - universidad nacional de cuyo
    - argentina
    + instituto balseiro
    + comision nacional de energia atomica
    + universidad nacional de cuyo
    + argentina

    - 21-feb-2008
    - + changed supported devices string (missused the [] and ())
    + 21-feb-2008
    + + changed supported devices string (missused the [] and ())

    - 13-oct-2007
    - + first try
    + 13-oct-2007
    + + first try


    */
    @@ -238,8 +238,8 @@ static int adq12b_attach(struct comedi_device *dev, struct comedi_devconfig *it)
    devpriv->unipolar = unipolar;
    devpriv->differential = differential;
    devpriv->digital_state = 0;
    -/* initialize channel and range to -1 so we make sure we always write
    - at least once to the CTREG in the instruction */
    +/*initialize channel and range to -1 so we make sure we always write
    + *at least once to the CTREG in the instruction */
    devpriv->last_channel = -1;
    devpriv->last_range = -1;

    --
    1.7.3.1.50.g1e633


    \
     
     \ /
      Last update: 2010-10-06 03:03    [W:4.161 / U:0.112 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site