lkml.org 
[lkml]   [2010]   [Oct]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: booting "nosmp" kernel causing ACPI errors
    Hi,

    Please find attached both requested dumps without and with nosmp
    argument for 2.6.36 kernel compiled for SMP.

    Bernard


    Le 22/10/2010 02:48, Zhang Rui a écrit :
    > Hi, Bernard,
    >
    > On Sun, 2010-10-17 at 00:45 +0800, Bernard Pidoux wrote:
    >
    >> Hi,
    >>
    >> I observed ACPI errors when booting 2.6.35.7 kernel with "nosmp" argument.
    >> dmesg shows a warning message starting with :
    >> WARNING: at mm/page_alloc.c:1981 __alloc_pages_nodemask+0x5b4/0x6d0()
    >> +Hardware name: MS-7519
    >> +Modules linked in:
    >> +Pid: 1, comm: swapper Not tainted 2.6.35.7 #2
    >>
    >>
    > it seems that ACPI is trying to load an invalid table.
    > would you please attach the acpidump of your laptop, both with and
    > without "nosmp"?
    >
    > thanks,
    > rui
    >
    >> This is followed by ACPI error messages and /proc/interrupts show that
    >> interrupts 0-15 are then handled by XT-PIC-XT
    >> instead of IO-APIC-edge and IO-APIC-fasteoi when runing smp kernel.
    >>
    >> Here is lspci dump :
    >>
    >> 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller
    >> (rev 03)
    >> 00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root
    >> Port (rev 03)
    >> 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
    >> UHCI Controller #4
    >> 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
    >> UHCI Controller #5
    >> 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
    >> UHCI Controller #6
    >> 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2
    >> EHCI Controller #2
    >> 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio
    >> Controller
    >> 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express
    >> Root Port 1
    >> 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express
    >> Port 2
    >> 00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express
    >> Root Port 6
    >> 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
    >> UHCI Controller #1
    >> 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
    >> UHCI Controller #2
    >> 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
    >> UHCI Controller #3
    >> 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2
    >> EHCI Controller #1
    >> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
    >> 00:1f.0 ISA bridge: Intel Corporation 82801JIB (ICH10) LPC Interface
    >> Controller
    >> 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port
    >> SATA IDE Controller #1
    >> 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
    >> 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port
    >> SATA IDE Controller #2
    >> 01:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 8400
    >> GS] (rev a1)
    >> 02:00.0 IDE interface: JMicron Technology Corp. JMB368 IDE controller
    >> 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
    >> RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
    >>
    >> I observed the same issue with another machine with also an MSI
    >> motherboard but using a PCI bridge VIA VT8237/VX700
    >> even when booting with "pci=use_crs" argument.
    >>
    >> Attached is diff -ruN file between 2.6.35.7 kernel without and with
    >> "nosmp" boot argument.
    >>
    >> Bernard
    >>
    >>
    >
    >

    Initializing cgroup subsys cpuset
    Linux version 2.6.36 (root@f6bvp-11) (gcc version 4.4.3 (GCC) ) #1 SMP Thu Oct 28 17:33:07 CEST 2010
    Command line: BOOT_IMAGE=2.6.36 root=UUID=7d268bb1-5045-4ccc-92b7-28a228f7a484 resume=UUID=4ee3102a-966b-4bb8-8bd5-53d37cf5a2e8 splash=silent vga=788
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
    BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
    BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
    BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
    Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
    DMI 2.3 present.
    Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
    e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
    e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    last_pfn = 0x7fee0 max_arch_pfn = 0x400000000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-BFFFF uncachable
    C0000-CDFFF write-protect
    CE000-EFFFF uncachable
    F0000-F7FFF write-through
    F8000-F8FFF uncachable
    F9000-FFFFF write-through
    MTRR variable ranges enabled:
    0 base 000000000 mask F80000000 write-back
    1 base 0D0000000 mask FF8000000 write-combining
    2 base 07FF00000 mask FFFF00000 uncachable
    3 disabled
    4 disabled
    5 disabled
    6 disabled
    7 disabled
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    initial memory mapped : 0 - 20000000
    found SMP MP-table at [ffff8800000f39c0] f39c0
    init_memory_mapping: 0000000000000000-000000007fee0000
    0000000000 - 007fe00000 page 2M
    007fe00000 - 007fee0000 page 4k
    kernel direct mapping tables up to 7fee0000 @ 16000-1a000
    RAMDISK: 37ab6000 - 37ff0000
    ACPI: RSDP 00000000000f7910 00014 (v00 P4M890)
    ACPI: RSDT 000000007fee3040 00038 (v01 P4M890 AWRDACPI 42302E31 AWRD 00000000)
    ACPI: FACP 000000007fee30c0 00074 (v01 P4M890 AWRDACPI 42302E31 AWRD 00000000)
    ACPI: DSDT 000000007fee3180 06A65 (v01 P4M890 AWRDACPI 00001000 MSFT 0100000E)
    ACPI: FACS 000000007fee0000 00040
    ACPI: MCFG 000000007fee9d40 0003C (v01 P4M890 AWRDACPI 42302E31 AWRD 00000000)
    ACPI: APIC 000000007fee9c40 00090 (v01 P4M890 AWRDACPI 42302E31 AWRD 00000000)
    ACPI: SSDT 000000007fee9dc0 0019E (v01 PmRef Cpu0Ist 00003000 INTL 20041203)
    ACPI: SSDT 000000007feea250 002F1 (v01 PmRef CpuPm 00003000 INTL 20041203)
    ACPI: Local APIC address 0xfee00000
    [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880002000000-ffff880003bfffff] on node 0
    Zone PFN ranges:
    DMA 0x00000010 -> 0x00001000
    DMA32 0x00001000 -> 0x00100000
    Normal empty
    Movable zone start PFN for each node
    early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0007fee0
    On node 0 totalpages: 523887
    DMA zone: 56 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 3927 pages, LIFO batch:0
    DMA32 zone: 7109 pages used for memmap
    DMA32 zone: 512795 pages, LIFO batch:31
    ACPI: PM-Timer IO Port: 0x408
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
    ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 4, version 3, address 0xfec00000, GSI 0-23
    ACPI: IOAPIC (id[0x05] address[0xfecc0000] gsi_base[24])
    IOAPIC[1]: apic_id 5, version 3, address 0xfecc0000, GSI 24-47
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    SMP: Allowing 4 CPUs, 2 hotplug CPUs
    nr_irqs_gsi: 64
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    Allocating PCI resources starting at 7fef0000 (gap: 7fef0000:60110000)
    Booting paravirtualized kernel on bare hardware
    setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
    early_res array is doubled to 64 at [18000 - 187ff]
    PERCPU: Embedded 28 pages/cpu @ffff880001800000 s85440 r8192 d21056 u524288
    pcpu-alloc: s85440 r8192 d21056 u524288 alloc=1*2097152
    pcpu-alloc: [0] 0 1 2 3
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 516722
    Kernel command line: BOOT_IMAGE=2.6.36 root=UUID=7d268bb1-5045-4ccc-92b7-28a228f7a484 resume=UUID=4ee3102a-966b-4bb8-8bd5-53d37cf5a2e8 splash=silent vga=788
    PID hash table entries: 4096 (order: 3, 32768 bytes)
    Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
    Subtract (39 early reservations)
    #1 [0001000000 - 00016b3a48] TEXT DATA BSS
    #2 [0037ab6000 - 0037ff0000] RAMDISK
    #3 [00016b4000 - 00016b40ae] BRK
    #4 [00000f39d0 - 0000100000] BIOS reserved
    #5 [00000f39c0 - 00000f39d0] MP-table mpf
    #6 [000009f000 - 00000f2154] BIOS reserved
    #7 [00000f22b0 - 00000f39c0] BIOS reserved
    #8 [00000f2154 - 00000f22b0] MP-table mpc
    #9 [0000010000 - 0000012000] TRAMPOLINE
    #10 [0000012000 - 0000016000] ACPI WAKEUP
    #11 [0000016000 - 0000018000] PGTABLE
    #12 [00016b40c0 - 00016b50c0] BOOTMEM
    #13 [00016b3a80 - 00016b3c00] BOOTMEM
    #14 [0001eb6000 - 0001eb7000] BOOTMEM
    #15 [0001eb7000 - 0001eb8000] BOOTMEM
    #16 [0002000000 - 0003c00000] MEMMAP 0
    #17 [00016b3c00 - 00016b3d80] BOOTMEM
    #18 [00016b50c0 - 00016c10c0] BOOTMEM
    #19 [00016c2000 - 00016c3000] BOOTMEM
    #20 [00016b3d80 - 00016b3e06] BOOTMEM
    #21 [00016c10c0 - 00016c12b8] BOOTMEM
    #22 [00016b3e40 - 00016b3e60] BOOTMEM
    #23 [00016b3e80 - 00016b3f08] BOOTMEM
    #24 [00016b3f40 - 00016b3fc8] BOOTMEM
    #25 [0001800000 - 000181c000] BOOTMEM
    #26 [0001880000 - 000189c000] BOOTMEM
    #27 [0001900000 - 000191c000] BOOTMEM
    #28 [0001980000 - 000199c000] BOOTMEM
    #29 [00016c12c0 - 00016c12c8] BOOTMEM
    #30 [00016c1300 - 00016c1308] BOOTMEM
    #31 [00016c1340 - 00016c1350] BOOTMEM
    #32 [00016c1380 - 00016c13a0] BOOTMEM
    #33 [00016c13c0 - 00016c14f0] BOOTMEM
    #34 [00016c1500 - 00016c1550] BOOTMEM
    #35 [00016c1580 - 00016c15d0] BOOTMEM
    #36 [00016c3000 - 00016cb000] BOOTMEM
    #37 [000199c000 - 0001b9c000] BOOTMEM
    #38 [00016cb000 - 00017cb000] BOOTMEM
    Memory: 2051008k/2096000k available (3743k kernel code, 452k absent, 44540k reserved, 1934k data, 500k init)
    SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    Hierarchical RCU implementation.
    RCU-based detection of stalled CPUs is disabled.
    Verbose stalled-CPUs detection is disabled.
    NR_IRQS:512
    Console: colour dummy device 80x25
    console [tty0] enabled
    Fast TSC calibration using PIT
    Detected 2194.809 MHz processor.
    Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.61 BogoMIPS (lpj=8779236)
    pid_max: default: 32768 minimum: 301
    Security Framework initialized
    Mount-cache hash table entries: 256
    Initializing cgroup subsys ns
    Initializing cgroup subsys cpuacct
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    mce: CPU supports 6 MCE banks
    CPU0: Thermal monitoring enabled (TM1)
    using mwait in idle threads.
    Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    PEBS disabled due to CPU errata.
    ... version: 2
    ... bit width: 40
    ... generic registers: 2
    ... value mask: 000000ffffffffff
    ... max period: 000000007fffffff
    ... fixed-purpose events: 3
    ... event mask: 0000000700000003
    ACPI: Core revision 20100702
    Setting APIC routing to flat
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz stepping 0d
    Booting Node 0, Processors #1
    Brought up 2 CPUs
    Total of 2 processors activated (8778.93 BogoMIPS).
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    PCI: Using configuration type 1 for base access
    mtrr: your CPUs had inconsistent fixed MTRR settings
    mtrr: probably your BIOS does not setup all CPUs.
    mtrr: corrected configuration.
    bio: create slab <bio-0> at 0
    ACPI: EC: Look up EC in DSDT
    ACPI: SSDT 000000007feea1c0 00087 (v01 PmRef Cpu1Ist 00003000 INTL 20041203)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 00087 (v01 PmRef Cpu1Ist 00003000 INTL 20041203)
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: No dock devices found.
    PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
    pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x7ff00000-0xfebfffff] (ignored)
    pci 0000:00:00.0: reg 10: [mem 0xd0000000-0xd7ffffff pref]
    pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:02.0: PME# disabled
    pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:03.0: PME# disabled
    pci 0000:00:0b.0: reg 10: [io 0xfc00-0xfcff]
    pci 0000:00:0b.0: reg 14: [mem 0xdffff000-0xdffff0ff]
    pci 0000:00:0b.0: supports D1 D2
    pci 0000:00:0b.0: PME# supported from D1 D2 D3hot D3cold
    pci 0000:00:0b.0: PME# disabled
    pci 0000:00:0f.0: reg 10: [io 0xf800-0xf807]
    pci 0000:00:0f.0: reg 14: [io 0xf400-0xf403]
    pci 0000:00:0f.0: reg 18: [io 0xf000-0xf007]
    pci 0000:00:0f.0: reg 1c: [io 0xec00-0xec03]
    pci 0000:00:0f.0: reg 20: [io 0xe800-0xe80f]
    pci 0000:00:0f.0: reg 24: [io 0xe400-0xe4ff]
    pci 0000:00:0f.1: reg 20: [io 0xe000-0xe00f]
    pci 0000:00:10.0: reg 20: [io 0xdc00-0xdc1f]
    pci 0000:00:10.0: supports D1 D2
    pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:10.0: PME# disabled
    pci 0000:00:10.1: reg 20: [io 0xd800-0xd81f]
    pci 0000:00:10.1: supports D1 D2
    pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:10.1: PME# disabled
    pci 0000:00:10.2: reg 20: [io 0xd400-0xd41f]
    pci 0000:00:10.2: supports D1 D2
    pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:10.2: PME# disabled
    pci 0000:00:10.3: reg 20: [io 0xd000-0xd01f]
    pci 0000:00:10.3: supports D1 D2
    pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:10.3: PME# disabled
    pci 0000:00:10.4: reg 10: [mem 0xdfffe000-0xdfffe0ff]
    pci 0000:00:10.4: supports D1 D2
    pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:10.4: PME# disabled
    HPET not enabled in BIOS. You might try hpet=force boot option
    pci 0000:00:11.5: reg 10: [io 0xcc00-0xccff]
    pci 0000:00:11.5: supports D1 D2
    pci 0000:00:01.0: PCI bridge to [bus 01-01]
    pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
    pci 0000:00:01.0: bridge window [mem 0xdfc00000-0xdfcfffff]
    pci 0000:00:01.0: bridge window [mem 0xdfb00000-0xdfbfffff pref]
    pci 0000:02:00.0: reg 10: [mem 0xdc000000-0xdcffffff]
    pci 0000:02:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
    pci 0000:02:00.0: reg 1c: [mem 0xdd000000-0xddffffff 64bit]
    pci 0000:02:00.0: reg 24: [io 0xbc00-0xbc7f]
    pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    pci 0000:00:02.0: PCI bridge to [bus 02-02]
    pci 0000:00:02.0: bridge window [io 0xb000-0xbfff]
    pci 0000:00:02.0: bridge window [mem 0xdc000000-0xdeffffff]
    pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
    pci 0000:00:03.0: PCI bridge to [bus 03-03]
    pci 0000:00:03.0: bridge window [io 0xa000-0xafff]
    pci 0000:00:03.0: bridge window [mem 0xdfe00000-0xdfefffff]
    pci 0000:00:03.0: bridge window [mem 0xdfd00000-0xdfdfffff 64bit pref]
    pci_bus 0000:00: on NUMA node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXG._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0
    ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
    ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *5
    ACPI: PCI Interrupt Link [ALKA] (IRQs *20)
    ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
    ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
    ACPI: PCI Interrupt Link [ALKD] (IRQs *23), disabled.
    vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
    vgaarb: loaded
    PCI: Using ACPI for IRQ routing
    PCI: pci_cache_line_size set to 64 bytes
    reserve RAM buffer: 000000000009f000 - 000000000009ffff
    reserve RAM buffer: 000000007fee0000 - 000000007fffffff
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    Switching to clocksource tsc
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 15 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:01: [io 0x0400-0x047f] has been reserved
    system 00:01: [io 0x0500-0x050f] has been reserved
    system 00:02: [io 0x04d0-0x04d1] has been reserved
    system 00:02: [io 0x0290-0x0297] has been reserved
    system 00:02: [io 0x0880-0x088f] has been reserved
    system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
    system 00:0e: [mem 0x000cec00-0x000cffff] has been reserved
    system 00:0e: [mem 0x000f0000-0x000f7fff] could not be reserved
    system 00:0e: [mem 0x000f8000-0x000fbfff] could not be reserved
    system 00:0e: [mem 0x000fc000-0x000fffff] could not be reserved
    system 00:0e: [mem 0x7fee0000-0x7fefffff] could not be reserved
    system 00:0e: [mem 0xffff0000-0xffffffff] has been reserved
    system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
    system 00:0e: [mem 0x00100000-0x7fedffff] could not be reserved
    system 00:0e: [mem 0xfec00000-0xfec00fff] could not be reserved
    system 00:0e: [mem 0xfee00000-0xfee00fff] has been reserved
    system 00:0e: [mem 0xfff80000-0xfffeffff] has been reserved
    pci 0000:00:01.0: PCI bridge to [bus 01-01]
    pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
    pci 0000:00:01.0: bridge window [mem 0xdfc00000-0xdfcfffff]
    pci 0000:00:01.0: bridge window [mem 0xdfb00000-0xdfbfffff pref]
    pci 0000:02:00.0: BAR 6: assigned [mem 0xde000000-0xde01ffff pref]
    pci 0000:00:02.0: PCI bridge to [bus 02-02]
    pci 0000:00:02.0: bridge window [io 0xb000-0xbfff]
    pci 0000:00:02.0: bridge window [mem 0xdc000000-0xdeffffff]
    pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
    pci 0000:00:03.0: PCI bridge to [bus 03-03]
    pci 0000:00:03.0: bridge window [io 0xa000-0xafff]
    pci 0000:00:03.0: bridge window [mem 0xdfe00000-0xdfefffff]
    pci 0000:00:03.0: bridge window [mem 0xdfd00000-0xdfdfffff 64bit pref]
    pci 0000:00:01.0: setting latency timer to 64
    pci 0000:00:02.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27
    pci 0000:00:02.0: setting latency timer to 64
    pci 0000:00:03.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31
    pci 0000:00:03.0: setting latency timer to 64
    pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
    pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
    pci_bus 0000:01: resource 0 [io 0x9000-0x9fff]
    pci_bus 0000:01: resource 1 [mem 0xdfc00000-0xdfcfffff]
    pci_bus 0000:01: resource 2 [mem 0xdfb00000-0xdfbfffff pref]
    pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
    pci_bus 0000:02: resource 1 [mem 0xdc000000-0xdeffffff]
    pci_bus 0000:02: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
    pci_bus 0000:03: resource 0 [io 0xa000-0xafff]
    pci_bus 0000:03: resource 1 [mem 0xdfe00000-0xdfefffff]
    pci_bus 0000:03: resource 2 [mem 0xdfd00000-0xdfdfffff 64bit pref]
    NET: Registered protocol family 2
    IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
    TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    TCP: Hash tables configured (established 262144 bind 65536)
    TCP reno registered
    UDP hash table entries: 1024 (order: 3, 32768 bytes)
    UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
    NET: Registered protocol family 1
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    pci 0000:00:01.0: disabling DAC on VIA PCI bridge
    pci 0000:00:10.4: EHCI: BIOS handoff failed (BIOS bug?) 01010001
    pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
    pci 0000:02:00.0: Boot video device
    PCI: CLS 32 bytes, default 64
    Trying to unpack rootfs image as initramfs...
    Freeing initrd memory: 5352k freed
    audit: initializing netlink socket (disabled)
    type=2000 audit(1288281768.964:1): initialized
    HugeTLB registered 2 MB page size, pre-allocated 0 pages
    Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    msgmni has been set to 4016
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010100000, using 1875k, total 262144k
    vesafb: mode is 800x600x16, linelength=1600, pages=2
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
    Console: switching to colour frame buffer device 100x37
    fb0: VESA VGA frame buffer device
    Linux agpgart interface v0.103
    Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    brd: module loaded
    Uniform Multi-Platform E-IDE driver
    PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    input: AT Translated Set 2 keyboard as /class/input/input0
    registered taskstats version 1
    Freeing unused kernel memory: 500k freed
    nash-hotplug (533): /proc/533/oom_adj is deprecated, please use /proc/533/oom_score_adj instead.
    input: ImExPS/2 Logitech Wheel Mouse as /class/input/input1
    SCSI subsystem initialized
    libata version 3.00 loaded.
    pata_via 0000:00:0f.1: version 0.3.4
    ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
    pata_via 0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
    scsi0 : pata_via
    scsi1 : pata_via
    ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14
    ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe008 irq 15
    ata1.00: ATAPI: TSSTcorpCD/DVDW TS-H552B, TS05, max UDMA/33
    ata1.01: ATA-6: IC35L120AVV207-1, V24OA66A, max UDMA/100
    ata1.01: 241254720 sectors, multi 16: LBA48
    ata1.00: configured for UDMA/33
    ata1.01: configured for UDMA/100
    scsi 0:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-H552B TS05 PQ: 0 ANSI: 5
    scsi 0:0:1:0: Direct-Access ATA IC35L120AVV207-1 V24O PQ: 0 ANSI: 5
    sd 0:0:1:0: [sda] 241254720 512-byte logical blocks: (123 GB/115 GiB)
    sd 0:0:1:0: [sda] Write Protect is off
    sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 < sda5 >
    sd 0:0:1:0: [sda] Attached SCSI disk
    ata2.00: ATA-6: ST3120026A, 3.06, max UDMA/100
    ata2.00: 234441648 sectors, multi 16: LBA48
    ata2.00: limited to UDMA/33 due to 40-wire cable
    ata2.00: configured for UDMA/33
    scsi 1:0:0:0: Direct-Access ATA ST3120026A 3.06 PQ: 0 ANSI: 5
    sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
    sd 1:0:0:0: [sdb] Write Protect is off
    sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sdb: sdb1 sdb2 < sdb5 >
    sd 1:0:0:0: [sdb] Attached SCSI disk
    pata_acpi 0000:00:0f.0: PCI INT B -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
    pata_acpi 0000:00:0f.0: PCI INT B disabled
    sata_via 0000:00:0f.0: version 2.6
    sata_via 0000:00:0f.0: PCI INT B -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
    sata_via 0000:00:0f.0: routed to hard irq line 11
    scsi2 : sata_via
    scsi3 : sata_via
    ata3: SATA max UDMA/133 cmd 0xf800 ctl 0xf400 bmdma 0xe800 irq 20
    ata4: SATA max UDMA/133 cmd 0xf000 ctl 0xec00 bmdma 0xe808 irq 20
    ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
    ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
    EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: acl
    udev: starting version 153
    rtc_cmos 00:04: RTC can wake from S4
    rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one year, y3k, 242 bytes nvram
    ACPI: acpi_idle registered with cpuidle
    agpgart: Detected VIA P4M890 chipset
    agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
    sr0: scsi3-mmc drive: 1x/48x writer cd/rw xa/form2 cdda tray
    cdrom: Uniform CD-ROM driver Revision: 3.20
    sr 0:0:0:0: Attached scsi CD-ROM sr0
    input: Power Button as /class/input/input2
    ACPI: Power Button [PWRB]
    input: Sleep Button as /class/input/input3
    ACPI: Sleep Button [SLPB]
    input: Power Button as /class/input/input4
    ACPI: Power Button [PWRF]
    sr 0:0:0:0: Attached scsi generic sg0 type 5
    sd 0:0:1:0: Attached scsi generic sg1 type 0
    sd 1:0:0:0: Attached scsi generic sg2 type 0
    FDC 0 is a post-1991 82077
    8139too: 8139too Fast Ethernet driver 0.9.28
    8139too 0000:00:0b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
    8139too 0000:00:0b.0: eth0: RealTek RTL8139 at 0xffffc900100fc000, 00:16:17:b3:e9:6c, IRQ 21
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
    VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22
    VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
    EXT4-fs (sdb5): re-mounted. Opts: acl
    EXT3-fs: barriers not enabled
    kjournald starting. Commit interval 5 seconds
    EXT3-fs (sda5): using internal journal
    EXT3-fs (sda5): mounted filesystem with writeback data mode
    loop: module loaded
    Adding 4602584k swap on /dev/sda1. Priority:-1 extents:1 across:4602584k
    Adding 4088504k swap on /dev/sdb1. Priority:-2 extents:1 across:4088504k
    IPv6: Loaded, but administratively disabled, reboot required to enable
    eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
    NET: Registered protocol family 17
    martian source 192.168.0.68 from 89.78.79.137, on dev eth0
    ll header: 00:16:17:b3:e9:6c:00:07:cb:c5:1c:2a:08:00
    Initializing cgroup subsys cpuset
    Linux version 2.6.36 (root@f6bvp-11) (gcc version 4.4.3 (GCC) ) #1 SMP Thu Oct 28 17:33:07 CEST 2010
    Command line: BOOT_IMAGE=2.6.36 root=UUID=7d268bb1-5045-4ccc-92b7-28a228f7a484 nosmp resume=UUID=4ee3102a-966b-4bb8-8bd5-53d37cf5a2e8 splash=silent vga=788
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
    BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
    BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
    BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
    Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
    DMI 2.3 present.
    Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
    e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
    e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    last_pfn = 0x7fee0 max_arch_pfn = 0x400000000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-BFFFF uncachable
    C0000-CDFFF write-protect
    CE000-EFFFF uncachable
    F0000-F7FFF write-through
    F8000-F8FFF uncachable
    F9000-FFFFF write-through
    MTRR variable ranges enabled:
    0 base 000000000 mask F80000000 write-back
    1 base 0D0000000 mask FF8000000 write-combining
    2 base 07FF00000 mask FFFF00000 uncachable
    3 disabled
    4 disabled
    5 disabled
    6 disabled
    7 disabled
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    initial memory mapped : 0 - 20000000
    found SMP MP-table at [ffff8800000f39c0] f39c0
    init_memory_mapping: 0000000000000000-000000007fee0000
    0000000000 - 007fe00000 page 2M
    007fe00000 - 007fee0000 page 4k
    kernel direct mapping tables up to 7fee0000 @ 16000-1a000
    RAMDISK: 37ab6000 - 37ff0000
    ACPI: RSDP 00000000000f7910 00014 (v00 P4M890)
    ACPI: RSDT 000000007fee3040 00038 (v01 P4M890 AWRDACPI 42302E31 AWRD 00000000)
    ACPI: FACP 000000007fee30c0 00074 (v01 P4M890 AWRDACPI 42302E31 AWRD 00000000)
    ACPI: DSDT 000000007fee3180 06A65 (v01 P4M890 AWRDACPI 00001000 MSFT 0100000E)
    ACPI: FACS 000000007fee0000 00040
    ACPI: MCFG 000000007fee9d40 0003C (v01 P4M890 AWRDACPI 42302E31 AWRD 00000000)
    ACPI: APIC 000000007fee9c40 00090 (v01 P4M890 AWRDACPI 42302E31 AWRD 00000000)
    ACPI: SSDT 000000007fee9dc0 0019E (v01 PmRef Cpu0Ist 00003000 INTL 20041203)
    ACPI: SSDT 000000007feea250 002F1 (v01 PmRef CpuPm 00003000 INTL 20041203)
    ACPI: Local APIC address 0xfee00000
    [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880002000000-ffff880003bfffff] on node 0
    Zone PFN ranges:
    DMA 0x00000010 -> 0x00001000
    DMA32 0x00001000 -> 0x00100000
    Normal empty
    Movable zone start PFN for each node
    early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0007fee0
    On node 0 totalpages: 523887
    DMA zone: 56 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 3927 pages, LIFO batch:0
    DMA32 zone: 7109 pages used for memmap
    DMA32 zone: 512795 pages, LIFO batch:31
    ACPI: PM-Timer IO Port: 0x408
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
    ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    ACPI: Skipping IOAPIC probe due to 'noapic' option.
    Using ACPI for processor (LAPIC) configuration information
    Intel MultiProcessor Specification v1.4
    MPTABLE: OEM ID: OEM00000
    MPTABLE: Product ID: PROD00000000
    MPTABLE: APIC at: 0xFEE00000
    I/O APIC #4 Version 17 at 0xFEC00000.
    IOAPIC[0]: apic_id 4, version 3, address 0xfec00000, GSI 0-23
    I/O APIC #5 Version 17 at 0xFECC0000.
    IOAPIC[1]: apic_id 5, version 3, address 0xfecc0000, GSI 24-47
    Processors: 2
    2 Processors exceeds max_cpus limit of 0
    SMP: Allowing 1 CPUs, 0 hotplug CPUs
    nr_irqs_gsi: 64
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    Allocating PCI resources starting at 7fef0000 (gap: 7fef0000:60110000)
    Booting paravirtualized kernel on bare hardware
    setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
    PERCPU: Embedded 28 pages/cpu @ffff880001800000 s85440 r8192 d21056 u2097152
    early_res array is doubled to 64 at [18000 - 187ff]
    pcpu-alloc: s85440 r8192 d21056 u2097152 alloc=1*2097152
    pcpu-alloc: [0] 0
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 516722
    Kernel command line: BOOT_IMAGE=2.6.36 root=UUID=7d268bb1-5045-4ccc-92b7-28a228f7a484 nosmp resume=UUID=4ee3102a-966b-4bb8-8bd5-53d37cf5a2e8 splash=silent vga=788
    PID hash table entries: 4096 (order: 3, 32768 bytes)
    Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
    Subtract (36 early reservations)
    #1 [0001000000 - 00016b3a48] TEXT DATA BSS
    #2 [0037ab6000 - 0037ff0000] RAMDISK
    #3 [00016b4000 - 00016b40ae] BRK
    #4 [00000f39d0 - 0000100000] BIOS reserved
    #5 [00000f39c0 - 00000f39d0] MP-table mpf
    #6 [000009f000 - 00000f2154] BIOS reserved
    #7 [00000f22b0 - 00000f39c0] BIOS reserved
    #8 [00000f2154 - 00000f22b0] MP-table mpc
    #9 [0000010000 - 0000012000] TRAMPOLINE
    #10 [0000012000 - 0000016000] ACPI WAKEUP
    #11 [0000016000 - 0000018000] PGTABLE
    #12 [00016b40c0 - 00016b50c0] BOOTMEM
    #13 [00016b3a80 - 00016b3c00] BOOTMEM
    #14 [0001eb6000 - 0001eb7000] BOOTMEM
    #15 [0001eb7000 - 0001eb8000] BOOTMEM
    #16 [0002000000 - 0003c00000] MEMMAP 0
    #17 [00016b3c00 - 00016b3d80] BOOTMEM
    #18 [00016b50c0 - 00016c10c0] BOOTMEM
    #19 [00016c2000 - 00016c3000] BOOTMEM
    #20 [00016b3d80 - 00016b3e06] BOOTMEM
    #21 [00016c10c0 - 00016c12b8] BOOTMEM
    #22 [00016b3e40 - 00016b3e60] BOOTMEM
    #23 [00016b3e80 - 00016b3f0e] BOOTMEM
    #24 [00016b3f40 - 00016b3fce] BOOTMEM
    #25 [0001800000 - 000181c000] BOOTMEM
    #26 [00016c12c0 - 00016c12c8] BOOTMEM
    #27 [00016c1300 - 00016c1308] BOOTMEM
    #28 [00016c1340 - 00016c1344] BOOTMEM
    #29 [00016c1380 - 00016c1388] BOOTMEM
    #30 [00016c13c0 - 00016c1510] BOOTMEM
    #31 [00016c1540 - 00016c15c0] BOOTMEM
    #32 [00016c15c0 - 00016c1640] BOOTMEM
    #33 [00016c3000 - 00016cb000] BOOTMEM
    #34 [000181c000 - 0001a1c000] BOOTMEM
    #35 [00016cb000 - 00017cb000] BOOTMEM
    Memory: 2051344k/2096000k available (3743k kernel code, 452k absent, 44204k reserved, 1934k data, 500k init)
    SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    Hierarchical RCU implementation.
    RCU-based detection of stalled CPUs is disabled.
    Verbose stalled-CPUs detection is disabled.
    NR_IRQS:512
    Console: colour dummy device 80x25
    console [tty0] enabled
    Fast TSC calibration using PIT
    Detected 2194.356 MHz processor.
    Calibrating delay loop (skipped), value calculated using timer frequency.. 4388.71 BogoMIPS (lpj=8777424)
    pid_max: default: 32768 minimum: 301
    Security Framework initialized
    Mount-cache hash table entries: 256
    Initializing cgroup subsys ns
    Initializing cgroup subsys cpuacct
    CPU: Unsupported number of siblings 2
    mce: CPU supports 6 MCE banks
    CPU0: Thermal monitoring enabled (TM1)
    using mwait in idle threads.
    Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    PEBS disabled due to CPU errata.
    ... version: 2
    ... bit width: 40
    ... generic registers: 2
    ... value mask: 000000ffffffffff
    ... max period: 000000007fffffff
    ... fixed-purpose events: 3
    ... event mask: 0000000700000003
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 16k freed
    ACPI: Core revision 20100702
    ACPI: setting ELCR to 0200 (from 0e20)
    Setting APIC routing to flat
    SMP mode deactivated.
    SMP disabled
    Brought up 1 CPUs
    Total of 1 processors activated (4388.71 BogoMIPS).
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: Look up EC in DSDT
    ACPI: SSDT 000000007feea1c0 00087 (v01 PmRef Cpu1Ist 00003000 INTL 20041203)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 00087 (v01 PmRef Cpu1Ist 00003000 INTL 20041203)
    ------------[ cut here ]------------
    WARNING: at mm/page_alloc.c:1984 __alloc_pages_nodemask+0x5d2/0x6a0()
    Hardware name: MS-7258
    Modules linked in:
    Pid: 1, comm: swapper Not tainted 2.6.36 #1
    Call Trace:
    [<ffffffff8104adaa>] warn_slowpath_common+0x7a/0xb0
    [<ffffffff8104adf5>] warn_slowpath_null+0x15/0x20
    [<ffffffff810b8572>] __alloc_pages_nodemask+0x5d2/0x6a0
    [<ffffffff81031ddb>] ? __ioremap_caller+0x25b/0x380
    [<ffffffff81031fc2>] ? ioremap_nocache+0x12/0x20
    [<ffffffff81394fc4>] ? acpi_os_map_memory+0x12/0x1e
    [<ffffffff8124bc00>] ? acpi_ex_system_memory_space_handler+0x0/0x1e0
    [<ffffffff810b8652>] __get_free_pages+0x12/0x50
    [<ffffffff810e68cf>] __kmalloc+0xef/0x100
    [<ffffffff81247711>] acpi_os_allocate+0x25/0x27
    [<ffffffff81247898>] acpi_ex_load_op+0xd8/0x290
    [<ffffffff8124a09e>] acpi_ex_opcode_1A_1T_0R+0x25/0x4b
    [<ffffffff8124193c>] acpi_ds_exec_end_op+0xea/0x3d6
    [<ffffffff81253bee>] acpi_ps_parse_loop+0x7d9/0x95f
    [<ffffffff810e5dc1>] ? kmem_cache_alloc+0x81/0xb0
    [<ffffffff810e5dc1>] ? kmem_cache_alloc+0x81/0xb0
    [<ffffffff81252d1d>] acpi_ps_parse_aml+0x9a/0x2b9
    [<ffffffff812543fb>] acpi_ps_execute_method+0x1cd/0x29e
    [<ffffffff8124f82d>] acpi_ns_evaluate+0xe1/0x1a8
    [<ffffffff8124f2a5>] acpi_evaluate_object+0xf9/0x1f2
    [<ffffffff8123a8c3>] acpi_processor_set_pdc+0x15e/0x185
    [<ffffffff8123ab98>] early_init_pdc+0xbc/0xc0
    [<ffffffff8125119a>] acpi_ns_walk_namespace+0xb9/0x177
    [<ffffffff8123aadc>] ? early_init_pdc+0x0/0xc0
    [<ffffffff8123aadc>] ? early_init_pdc+0x0/0xc0
    [<ffffffff8124f145>] acpi_walk_namespace+0x85/0xbf
    [<ffffffff815c66a2>] ? acpi_init+0x0/0x121
    [<ffffffff815c68f9>] acpi_early_processor_set_pdc+0x3a/0x53
    [<ffffffff815c6579>] acpi_bus_init+0xb5/0x1de
    [<ffffffff811f718e>] ? kobject_create_and_add+0x3e/0x80
    [<ffffffff815c6713>] acpi_init+0x71/0x121
    [<ffffffff8100204e>] do_one_initcall+0x3e/0x180
    [<ffffffff815a2767>] kernel_init+0x159/0x1e3
    [<ffffffff8100bc24>] kernel_thread_helper+0x4/0x10
    [<ffffffff815a260e>] ? kernel_init+0x0/0x1e3
    [<ffffffff8100bc20>] ? kernel_thread_helper+0x0/0x10
    ---[ end trace 4eaa2a86a8e2da22 ]---
    ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._PDC] (Node ffff88007f8430f0), AE_NO_MEMORY
    ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU3._PDC] (Node ffff88007f843190), AE_NO_MEMORY
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S4 S5)
    ACPI: Using PIC for interrupt routing
    ACPI: No dock devices found.
    PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
    pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x7ff00000-0xfebfffff] (ignored)
    pci 0000:00:00.0: reg 10: [mem 0xd0000000-0xd7ffffff pref]
    pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:02.0: PME# disabled
    pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:03.0: PME# disabled
    pci 0000:00:0b.0: reg 10: [io 0xfc00-0xfcff]
    pci 0000:00:0b.0: reg 14: [mem 0xdffff000-0xdffff0ff]
    pci 0000:00:0b.0: supports D1 D2
    pci 0000:00:0b.0: PME# supported from D1 D2 D3hot D3cold
    pci 0000:00:0b.0: PME# disabled
    pci 0000:00:0f.0: reg 10: [io 0xf800-0xf807]
    pci 0000:00:0f.0: reg 14: [io 0xf400-0xf403]
    pci 0000:00:0f.0: reg 18: [io 0xf000-0xf007]
    pci 0000:00:0f.0: reg 1c: [io 0xec00-0xec03]
    pci 0000:00:0f.0: reg 20: [io 0xe800-0xe80f]
    pci 0000:00:0f.0: reg 24: [io 0xe400-0xe4ff]
    pci 0000:00:0f.1: reg 20: [io 0xe000-0xe00f]
    pci 0000:00:10.0: reg 20: [io 0xdc00-0xdc1f]
    pci 0000:00:10.0: supports D1 D2
    pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:10.0: PME# disabled
    pci 0000:00:10.1: reg 20: [io 0xd800-0xd81f]
    pci 0000:00:10.1: supports D1 D2
    pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:10.1: PME# disabled
    pci 0000:00:10.2: reg 20: [io 0xd400-0xd41f]
    pci 0000:00:10.2: supports D1 D2
    pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:10.2: PME# disabled
    pci 0000:00:10.3: reg 20: [io 0xd000-0xd01f]
    pci 0000:00:10.3: supports D1 D2
    pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:10.3: PME# disabled
    pci 0000:00:10.4: reg 10: [mem 0xdfffe000-0xdfffe0ff]
    pci 0000:00:10.4: supports D1 D2
    pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:10.4: PME# disabled
    HPET not enabled in BIOS. You might try hpet=force boot option
    pci 0000:00:11.5: reg 10: [io 0xcc00-0xccff]
    pci 0000:00:11.5: supports D1 D2
    pci 0000:00:01.0: PCI bridge to [bus 01-01]
    pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
    pci 0000:00:01.0: bridge window [mem 0xdfc00000-0xdfcfffff]
    pci 0000:00:01.0: bridge window [mem 0xdfb00000-0xdfbfffff pref]
    pci 0000:02:00.0: reg 10: [mem 0xdc000000-0xdcffffff]
    pci 0000:02:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
    pci 0000:02:00.0: reg 1c: [mem 0xdd000000-0xddffffff 64bit]
    pci 0000:02:00.0: reg 24: [io 0xbc00-0xbc7f]
    pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    pci 0000:00:02.0: PCI bridge to [bus 02-02]
    pci 0000:00:02.0: bridge window [io 0xb000-0xbfff]
    pci 0000:00:02.0: bridge window [mem 0xdc000000-0xdeffffff]
    pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
    pci 0000:00:03.0: PCI bridge to [bus 03-03]
    pci 0000:00:03.0: bridge window [io 0xa000-0xafff]
    pci 0000:00:03.0: bridge window [mem 0xdfe00000-0xdfefffff]
    pci 0000:00:03.0: bridge window [mem 0xdfd00000-0xdfdfffff 64bit pref]
    pci_bus 0000:00: on NUMA node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXG._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0
    ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
    ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *5
    ACPI: PCI Interrupt Link [ALKA] (IRQs *20)
    ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
    ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
    ACPI: PCI Interrupt Link [ALKD] (IRQs *23), disabled.
    vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
    vgaarb: loaded
    PCI: Using ACPI for IRQ routing
    PCI: pci_cache_line_size set to 64 bytes
    reserve RAM buffer: 000000000009f000 - 000000000009ffff
    reserve RAM buffer: 000000007fee0000 - 000000007fffffff
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    Switching to clocksource tsc
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 15 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:01: [io 0x0400-0x047f] has been reserved
    system 00:01: [io 0x0500-0x050f] has been reserved
    system 00:02: [io 0x04d0-0x04d1] has been reserved
    system 00:02: [io 0x0290-0x0297] has been reserved
    system 00:02: [io 0x0880-0x088f] has been reserved
    system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
    system 00:0e: [mem 0x000cec00-0x000cffff] has been reserved
    system 00:0e: [mem 0x000f0000-0x000f7fff] could not be reserved
    system 00:0e: [mem 0x000f8000-0x000fbfff] could not be reserved
    system 00:0e: [mem 0x000fc000-0x000fffff] could not be reserved
    system 00:0e: [mem 0x7fee0000-0x7fefffff] could not be reserved
    system 00:0e: [mem 0xffff0000-0xffffffff] has been reserved
    system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
    system 00:0e: [mem 0x00100000-0x7fedffff] could not be reserved
    system 00:0e: [mem 0xfec00000-0xfec00fff] has been reserved
    system 00:0e: [mem 0xfee00000-0xfee00fff] has been reserved
    system 00:0e: [mem 0xfff80000-0xfffeffff] has been reserved
    pci 0000:00:01.0: PCI bridge to [bus 01-01]
    pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
    pci 0000:00:01.0: bridge window [mem 0xdfc00000-0xdfcfffff]
    pci 0000:00:01.0: bridge window [mem 0xdfb00000-0xdfbfffff pref]
    pci 0000:02:00.0: BAR 6: assigned [mem 0xde000000-0xde01ffff pref]
    pci 0000:00:02.0: PCI bridge to [bus 02-02]
    pci 0000:00:02.0: bridge window [io 0xb000-0xbfff]
    pci 0000:00:02.0: bridge window [mem 0xdc000000-0xdeffffff]
    pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
    pci 0000:00:03.0: PCI bridge to [bus 03-03]
    pci 0000:00:03.0: bridge window [io 0xa000-0xafff]
    pci 0000:00:03.0: bridge window [mem 0xdfe00000-0xdfefffff]
    pci 0000:00:03.0: bridge window [mem 0xdfd00000-0xdfdfffff 64bit pref]
    pci 0000:00:01.0: setting latency timer to 64
    ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
    PCI: setting IRQ 11 as level-triggered
    pci 0000:00:02.0: PCI INT A -> Link[LNK1] -> GSI 11 (level, low) -> IRQ 11
    pci 0000:00:02.0: setting latency timer to 64
    pci 0000:00:03.0: PCI INT A -> Link[LNK1] -> GSI 11 (level, low) -> IRQ 11
    pci 0000:00:03.0: setting latency timer to 64
    pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
    pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
    pci_bus 0000:01: resource 0 [io 0x9000-0x9fff]
    pci_bus 0000:01: resource 1 [mem 0xdfc00000-0xdfcfffff]
    pci_bus 0000:01: resource 2 [mem 0xdfb00000-0xdfbfffff pref]
    pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
    pci_bus 0000:02: resource 1 [mem 0xdc000000-0xdeffffff]
    pci_bus 0000:02: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
    pci_bus 0000:03: resource 0 [io 0xa000-0xafff]
    pci_bus 0000:03: resource 1 [mem 0xdfe00000-0xdfefffff]
    pci_bus 0000:03: resource 2 [mem 0xdfd00000-0xdfdfffff 64bit pref]
    NET: Registered protocol family 2
    IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
    TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    TCP: Hash tables configured (established 262144 bind 65536)
    TCP reno registered
    UDP hash table entries: 1024 (order: 3, 32768 bytes)
    UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
    NET: Registered protocol family 1
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    pci 0000:00:01.0: disabling DAC on VIA PCI bridge
    pci 0000:00:10.4: EHCI: BIOS handoff failed (BIOS bug?) 01010001
    pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
    pci 0000:02:00.0: Boot video device
    PCI: CLS 32 bytes, default 64
    Trying to unpack rootfs image as initramfs...
    Freeing initrd memory: 5352k freed
    audit: initializing netlink socket (disabled)
    type=2000 audit(1288282720.828:1): initialized
    HugeTLB registered 2 MB page size, pre-allocated 0 pages
    Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    msgmni has been set to 4017
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010100000, using 1875k, total 262144k
    vesafb: mode is 800x600x16, linelength=1600, pages=2
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
    Console: switching to colour frame buffer device 100x37
    fb0: VESA VGA frame buffer device
    Linux agpgart interface v0.103
    Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    brd: module loaded
    Uniform Multi-Platform E-IDE driver
    PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    input: AT Translated Set 2 keyboard as /class/input/input0
    input: ImExPS/2 Logitech Wheel Mouse as /class/input/input1
    registered taskstats version 1
    Freeing unused kernel memory: 500k freed
    nash-hotplug (523): /proc/523/oom_adj is deprecated, please use /proc/523/oom_score_adj instead.
    SCSI subsystem initialized
    libata version 3.00 loaded.
    pata_via 0000:00:0f.1: version 0.3.4
    ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
    PCI: setting IRQ 10 as level-triggered
    pata_via 0000:00:0f.1: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
    pata_via 0000:00:0f.1: VIA VLink IRQ fixup, from 255 to 10
    scsi0 : pata_via
    scsi1 : pata_via
    ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14
    ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe008 irq 15
    ata1.00: ATAPI: TSSTcorpCD/DVDW TS-H552B, TS05, max UDMA/33
    ata1.01: ATA-6: IC35L120AVV207-1, V24OA66A, max UDMA/100
    ata1.01: 241254720 sectors, multi 16: LBA48
    ata1.00: configured for UDMA/33
    ata1.01: configured for UDMA/100
    scsi 0:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-H552B TS05 PQ: 0 ANSI: 5
    scsi 0:0:1:0: Direct-Access ATA IC35L120AVV207-1 V24O PQ: 0 ANSI: 5
    sd 0:0:1:0: [sda] 241254720 512-byte logical blocks: (123 GB/115 GiB)
    sd 0:0:1:0: [sda] Write Protect is off
    sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 < sda5 >
    sd 0:0:1:0: [sda] Attached SCSI disk
    ata2.00: ATA-6: ST3120026A, 3.06, max UDMA/100
    ata2.00: 234441648 sectors, multi 16: LBA48
    ata2.00: limited to UDMA/33 due to 40-wire cable
    ata2.00: configured for UDMA/33
    scsi 1:0:0:0: Direct-Access ATA ST3120026A 3.06 PQ: 0 ANSI: 5
    sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
    sd 1:0:0:0: [sdb] Write Protect is off
    sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sdb: sdb1 sdb2 < sdb5 >
    sd 1:0:0:0: [sdb] Attached SCSI disk
    ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
    pata_acpi 0000:00:0f.0: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
    pata_acpi 0000:00:0f.0: PCI INT B disabled
    sata_via 0000:00:0f.0: version 2.6
    sata_via 0000:00:0f.0: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
    sata_via 0000:00:0f.0: routed to hard irq line 11
    irq 11: nobody cared (try booting with the "irqpoll" option)
    Pid: 542, comm: modprobe Tainted: G W 2.6.36 #1
    Call Trace:
    <IRQ> [<ffffffff8109f5e6>] __report_bad_irq+0x26/0xa0
    [<ffffffff8109f7ec>] note_interrupt+0x18c/0x1d0
    [<ffffffff810a053d>] handle_level_irq+0xdd/0x100
    [<ffffffff81012c09>] ? read_tsc+0x9/0x20
    [<ffffffff8100e0dd>] handle_irq+0x1d/0x30
    [<ffffffff8100d5d7>] do_IRQ+0x67/0xf0
    [<ffffffff813a5693>] ret_from_intr+0x0/0x11
    [<ffffffff81050e03>] ? __do_softirq+0x63/0x140
    [<ffffffff8100bd1c>] ? call_softirq+0x1c/0x30
    [<ffffffff8100e085>] ? do_softirq+0x65/0xa0
    [<ffffffff81050bcd>] ? irq_exit+0x7d/0x90
    [<ffffffff8100d5e0>] ? do_IRQ+0x70/0xf0
    [<ffffffff813a5693>] ? ret_from_intr+0x0/0x11
    <EOI> [<ffffffff813a517b>] ? _raw_spin_unlock_irqrestore+0xb/0x20
    [<ffffffff8109e883>] ? __setup_irq+0x1b3/0x340
    [<ffffffffa0062cf0>] ? ata_bmdma_interrupt+0x0/0x200 [libata]
    [<ffffffff8109f2b9>] ? request_threaded_irq+0xf9/0x160
    [<ffffffff810a08dc>] ? devm_request_threaded_irq+0x6c/0xc0
    [<ffffffffa0062cf0>] ? ata_bmdma_interrupt+0x0/0x200 [libata]
    [<ffffffffa0062cf0>] ? ata_bmdma_interrupt+0x0/0x200 [libata]
    [<ffffffffa004f0b4>] ? ata_host_activate+0x94/0x110 [libata]
    [<ffffffff812d9e71>] ? pcibios_set_master+0x21/0xa0
    [<ffffffffa00ac8b1>] ? svia_init_one+0x581/0x640 [sata_via]
    [<ffffffff8120ec02>] ? local_pci_probe+0x12/0x20
    [<ffffffff8120fc00>] ? pci_device_probe+0x80/0xb0
    [<ffffffff812976aa>] ? driver_sysfs_add+0x7a/0xb0
    [<ffffffff812977ed>] ? driver_probe_device+0x8d/0x1a0
    [<ffffffff81297c33>] ? __driver_attach+0x93/0xa0
    [<ffffffff81297ba0>] ? __driver_attach+0x0/0xa0
    [<ffffffff81296ad8>] ? bus_for_each_dev+0x68/0x90
    [<ffffffff81297629>] ? driver_attach+0x19/0x20
    [<ffffffff81296d98>] ? bus_add_driver+0xb8/0x260
    [<ffffffffa00b1000>] ? svia_init+0x0/0x20 [sata_via]
    [<ffffffff81297d88>] ? driver_register+0x78/0x140
    [<ffffffffa00b1000>] ? svia_init+0x0/0x20 [sata_via]
    [<ffffffff8120fe71>] ? __pci_register_driver+0x51/0xd0
    [<ffffffffa00b101e>] ? svia_init+0x1e/0x20 [sata_via]
    [<ffffffff8100204e>] ? do_one_initcall+0x3e/0x180
    [<ffffffff8107f1cb>] ? sys_init_module+0xbb/0x200
    [<ffffffff8100ae02>] ? system_call_fastpath+0x16/0x1b
    handlers:
    [<ffffffffa0062cf0>] (ata_bmdma_interrupt+0x0/0x200 [libata])
    Disabling IRQ #11
    scsi2 : sata_via
    scsi3 : sata_via
    ata3: SATA max UDMA/133 cmd 0xf800 ctl 0xf400 bmdma 0xe800 irq 11
    ata4: SATA max UDMA/133 cmd 0xf000 ctl 0xec00 bmdma 0xe808 irq 11
    ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
    ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
    EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: acl
    udev: starting version 153
    agpgart: Detected VIA P4M890 chipset
    agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
    rtc_cmos 00:04: RTC can wake from S4
    rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one year, y3k, 242 bytes nvram
    input: Power Button as /class/input/input2
    ACPI: Power Button [PWRB]
    input: Sleep Button as /class/input/input3
    ACPI: Sleep Button [SLPB]
    input: Power Button as /class/input/input4
    ACPI: Power Button [PWRF]
    ACPI: acpi_idle registered with cpuidle
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    FDC 0 is a post-1991 82077
    8139too: 8139too Fast Ethernet driver 0.9.28
    ACPI: PCI Interrupt Link [LNKF] BIOS reported IRQ 0, using IRQ 10
    ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
    8139too 0000:00:0b.0: PCI INT A -> Link[LNKF] -> GSI 10 (level, low) -> IRQ 10
    8139too 0000:00:0b.0: eth0: RealTek RTL8139 at 0xffffc900100fe000, 00:16:17:b3:e9:6c, IRQ 10
    sr0: scsi3-mmc drive: 1x/48x writer cd/rw xa/form2 cdda tray
    cdrom: Uniform CD-ROM driver Revision: 3.20
    sr 0:0:0:0: Attached scsi CD-ROM sr0
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    sr 0:0:0:0: Attached scsi generic sg0 type 5
    sd 0:0:1:0: Attached scsi generic sg1 type 0
    sd 1:0:0:0: Attached scsi generic sg2 type 0
    8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
    ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
    VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    irq 11: nobody cared (try booting with the "irqpoll" option)
    Pid: 786, comm: modprobe Tainted: G W 2.6.36 #1
    Call Trace:
    <IRQ> [<ffffffff8109f5e6>] __report_bad_irq+0x26/0xa0
    [<ffffffff8109f7ec>] note_interrupt+0x18c/0x1d0
    [<ffffffff810a053d>] handle_level_irq+0xdd/0x100
    [<ffffffff81012c09>] ? read_tsc+0x9/0x20
    [<ffffffff8100e0dd>] handle_irq+0x1d/0x30
    [<ffffffff8100d5d7>] do_IRQ+0x67/0xf0
    [<ffffffff813a5693>] ret_from_intr+0x0/0x11
    [<ffffffff81050e03>] ? __do_softirq+0x63/0x140
    [<ffffffff8100bd1c>] ? call_softirq+0x1c/0x30
    [<ffffffff8100e085>] ? do_softirq+0x65/0xa0
    [<ffffffff81050bcd>] ? irq_exit+0x7d/0x90
    [<ffffffff8100d5e0>] ? do_IRQ+0x70/0xf0
    [<ffffffff813a5693>] ? ret_from_intr+0x0/0x11
    <EOI> [<ffffffff813a517b>] ? _raw_spin_unlock_irqrestore+0xb/0x20
    [<ffffffff8109e883>] ? __setup_irq+0x1b3/0x340
    [<ffffffff8120c318>] ? __pci_request_region+0xa8/0x170
    [<ffffffffa0292600>] ? snd_via8233_interrupt+0x0/0x140 [snd_via82xx]
    [<ffffffff8109f2b9>] ? request_threaded_irq+0xf9/0x160
    [<ffffffffa02933be>] ? snd_via82xx_probe+0x306/0xe23 [snd_via82xx]
    [<ffffffff811479fe>] ? sysfs_addrm_finish+0x2e/0xd0
    [<ffffffff811480b7>] ? sysfs_add_one+0x27/0xd0
    [<ffffffff8120ec02>] ? local_pci_probe+0x12/0x20
    [<ffffffff8120fc00>] ? pci_device_probe+0x80/0xb0
    [<ffffffff812976aa>] ? driver_sysfs_add+0x7a/0xb0
    [<ffffffff812977ed>] ? driver_probe_device+0x8d/0x1a0
    [<ffffffff81297c33>] ? __driver_attach+0x93/0xa0
    [<ffffffff81297ba0>] ? __driver_attach+0x0/0xa0
    [<ffffffff81296ad8>] ? bus_for_each_dev+0x68/0x90
    [<ffffffff81297629>] ? driver_attach+0x19/0x20
    [<ffffffff81296d98>] ? bus_add_driver+0xb8/0x260
    [<ffffffffa0299000>] ? alsa_card_via82xx_init+0x0/0x20 [snd_via82xx]
    [<ffffffff81297d88>] ? driver_register+0x78/0x140
    [<ffffffffa0299000>] ? alsa_card_via82xx_init+0x0/0x20 [snd_via82xx]
    [<ffffffff8120fe71>] ? __pci_register_driver+0x51/0xd0
    [<ffffffffa029901e>] ? alsa_card_via82xx_init+0x1e/0x20 [snd_via82xx]
    [<ffffffff8100204e>] ? do_one_initcall+0x3e/0x180
    [<ffffffff8107f1cb>] ? sys_init_module+0xbb/0x200
    [<ffffffff8100ae02>] ? system_call_fastpath+0x16/0x1b
    handlers:
    [<ffffffffa0062cf0>] (ata_bmdma_interrupt+0x0/0x200 [libata])
    [<ffffffffa0292600>] (snd_via8233_interrupt+0x0/0x140 [snd_via82xx])
    Disabling IRQ #11
    VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
    EXT4-fs (sdb5): re-mounted. Opts: acl
    EXT3-fs: barriers not enabled
    kjournald starting. Commit interval 5 seconds
    EXT3-fs (sda5): using internal journal
    EXT3-fs (sda5): mounted filesystem with writeback data mode
    loop: module loaded
    Adding 4602584k swap on /dev/sda1. Priority:-1 extents:1 across:4602584k
    Adding 4088504k swap on /dev/sdb1. Priority:-2 extents:1 across:4088504k
    IPv6: Loaded, but administratively disabled, reboot required to enable
    eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
    spurious 8259A interrupt: IRQ7.
    \
     
     \ /
      Last update: 2010-10-29 21:47    [W:0.110 / U:0.172 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site