lkml.org 
[lkml]   [2010]   [Oct]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [RFC PATCH 0/2] SL351x (Gemini) ethernet driver
From
2010/10/29 Michał Mirosław <mirq-linux@rere.qmqm.pl>:
> This is a driver for SL351x (Gemini) SoC ethernet peripheral.
> Based on work by Paulius Zaleckas and GPLd code from Raidsonic
> and other NAS vendors.
>
> This is work in progress. Please comment and test if you can.
> Patches are against 2.6.37-rc (current Linus' tree) but should
> apply to 2.6.36. You probably also need patches for PATA from
>        git://git.berlios.de/gemini-board ib4220

Nice to hear!

> Known bugs:
>  - repeatable bad HW calculated TCP csum
>    happens for only some packets in a TCP stream
>    looks like it doesn't like some data pattern or timing
>    (difference between correct and generated csum is the same
>    when the packet is retransmitted with changed header/TCP tstamp)
>  - TX DMA hangs sometimes (needs module reload when that happens)
>    with debugging printks disabled and HW TX csum enabled

AFAIK DMA hangs are associated with HW checksum errors. So generally
disabling HW csum is the best solution so far. If I am not wrong, OpenWRT
does just this in their patches.

DMA hangs happen for other reasons as well and main cause seems to be MII
interface. If timing is wrong or some noise gets onto PCB tracks it is
very likely
that DMA will hang. Also using both ports at one time increases posibility of
hang.

>  - unsynced counters
>
> I started to work on Paulius' code to find out why the TX DMA hangs
> happen, but then I realized that complete rewrite was a better way
> to understand how the hardware works and why it doesn't. As a "bonus"
> this got some additional features:
>  - ethtool support
>  - 64-bit counters
>  - proper cleanup on ifdown/module unload
>  - better DMA API usage
>  - cleaned up code
>  - a lot of tx/rx debugging printks
>  - based on 2.6.36 DMA and netdev interfaces
>
> TODO:
>  - NAPI
>  - MTU changing

Super cool! NAPI shouldn't be very hard...

> For normal use tx-csum and tso have to be disabled:
>   ethtool -K eth0 tso off tx off
>
> Tested on Raidsonic IcyBox 4220-B (dual SATA NAS).
>
> I'm also interested in getting copies of various GPL packages for
> StorLink SL3516. I already have following packages (md5sum):
>
> 89991e543eb2e473e3d380ac9a4cd8b4  GPL_source_code(Raidsonic).zip
> 6ba8b833c429794315f0a73ce2961bd8  Gemini_v2_6_0-n.tgz
> fe87e97a33554bcab8284d25ff86e383  n299_n199_1.00.24_GPL.tar.bz2
> eca8994354368304ca3b5bd1429c20bb  sl-boot_1.0.9.tgz
> eafd6497074fe0651459bf38c39d66bd  vt4kern-1.5.tar.bz2.tar

I will see what I can provide you when I get home.

>
> Best Regards,
> Michał Mirosław
>
> ---
>
> Michał Mirosław (2):
>  Gemini: create platform device for ethernet in Raidsonic IB-4220B
>  Gemini: SL351x Ethernet driver
>
>  arch/arm/mach-gemini/board-nas4220b.c    |   53 +
>  arch/arm/mach-gemini/common.h            |    2 +
>  arch/arm/mach-gemini/devices.c           |   52 +
>  arch/arm/mach-gemini/include/mach/gmac.h |   21 +
>  drivers/net/Kconfig                      |    7 +
>  drivers/net/Makefile                     |    1 +
>  drivers/net/sl351x.c                     | 1706 ++++++++++++++++++++++++++++++
>  drivers/net/sl351x_hw.h                  | 1423 +++++++++++++++++++++++++
>  8 files changed, 3265 insertions(+), 0 deletions(-)
>  create mode 100644 arch/arm/mach-gemini/include/mach/gmac.h
>  create mode 100644 drivers/net/sl351x.c
>  create mode 100644 drivers/net/sl351x_hw.h
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2010-10-29 13:17    [W:0.052 / U:0.816 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site