lkml.org 
[lkml]   [2010]   [Oct]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ARM: imx: Add some core definitions for MX53
On 10/27/2010 04:09 AM, Uwe Kleine-König wrote:
> Hello,
>
> On Wed, Oct 27, 2010 at 09:29:59AM +0100, Grant Likely wrote:
>>> ---
>>> arch/arm/plat-mxc/include/mach/iomux-mx53.h | 301 +++++++++++++++++++
>>> arch/arm/plat-mxc/include/mach/mx53.h | 433 +++++++++++++++++++++++++++
>>
>> Hi Dinh.
>>
>> In general, these definitions should not be added until they are
>> actually needed by driver code.
> ack.
>
>> Also, from my understanding, the mx53 is very similar to the mx51.
>> If I'm correct, then they should be sharing the same set of #defines.
> Note, I asked for a seperate header file. See
> http://thread.gmane.org/gmane.linux.kernel/1051001/focus=1051352
>
>> What is the diff between *mx51.h and *mx53.h?
> Just from a quick look at least some base addresses are different.
> (e.g. MX51_DEBUG_BASE_ADDRESS = 0x60000000, MX53_DEBUG_BASE_ADDRESS =
> 0x40000000; SPBA0, AIPS1 and AIPS2 differ, too)

It is quite simple for these buses. Subtract 0x20000000 from MX51
address and you have the MX53 address. MX53 has some additional
peripherals, but otherwise the common peripherals are all at the same
relative offsets. A 3rd MX5 derivative also has the same memory map as
MX53 with slightly different peripheral mix.

Rob


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2010-10-27 15:39    [W:0.068 / U:29.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site