lkml.org 
[lkml]   [2010]   [Oct]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 03/12] davinci: add ssp config for tnetv107x evm board
Date
This patch adds SSP configuration and pin muxing info for tnetv107x
evm boards.

Signed-off-by: Cyril Chemparathy <cyril@ti.com>
---
arch/arm/mach-davinci/board-tnetv107x-evm.c | 15 +++++++++++++++
1 files changed, 15 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c
index a6db854..c74ea66 100644
--- a/arch/arm/mach-davinci/board-tnetv107x-evm.c
+++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c
@@ -33,6 +33,7 @@
#include <mach/edma.h>
#include <mach/mux.h>
#include <mach/cp_intc.h>
+#include <mach/ti_ssp.h>
#include <mach/tnetv107x.h>

#define EVM_MMC_WP_GPIO 21
@@ -99,6 +100,12 @@ static const short uart1_pins[] __initdata = {
-1
};

+static const short ssp_pins[] __initdata = {
+ TNETV107X_SSP0_0, TNETV107X_SSP0_1, TNETV107X_SSP0_2,
+ TNETV107X_SSP1_0, TNETV107X_SSP1_1, TNETV107X_SSP1_2,
+ TNETV107X_SSP1_3, -1
+};
+
static struct mtd_partition nand_partitions[] = {
/* bootloader (U-Boot, etc) in first 12 sectors */
{
@@ -196,17 +203,25 @@ static struct matrix_keypad_platform_data keypad_config = {
.no_autorepeat = 0,
};

+static struct ti_ssp_data ssp_config = {
+ .out_clock = 250 * 1000,
+ .dev_data = {
+ },
+};
+
static struct tnetv107x_device_info evm_device_info __initconst = {
.serial_config = &serial_config,
.mmc_config[1] = &mmc_config, /* controller 1 */
.nand_config[0] = &nand_config, /* chip select 0 */
.keypad_config = &keypad_config,
+ .ssp_config = &ssp_config,
};

static __init void tnetv107x_evm_board_init(void)
{
davinci_cfg_reg_list(sdio1_pins);
davinci_cfg_reg_list(uart1_pins);
+ davinci_cfg_reg_list(ssp_pins);

tnetv107x_devices_init(&evm_device_info);
}
--
1.7.0.4


\
 
 \ /
  Last update: 2010-10-26 22:23    [W:0.198 / U:1.080 seconds]
©2003-2014 Jasper Spaans. Advertise on this site