lkml.org 
[lkml]   [2010]   [Oct]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/2] opticon: use generic code where possible
Date
Use usb_serial_generic_XXX instead of custom code (wherever possible).
Both code size and private data are reduced considerably.

Signed-off-by: Alon Ziv <alon-git@nolaviz.org>
---
drivers/usb/serial/opticon.c | 411 +++++-------------------------------------
1 files changed, 44 insertions(+), 367 deletions(-)

diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index eda1f92..f7dd851 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -31,54 +31,19 @@ MODULE_DEVICE_TABLE(usb, id_table);

/* This structure holds all of the individual device information */
struct opticon_private {
- struct usb_device *udev;
- struct usb_serial *serial;
- struct usb_serial_port *port;
- unsigned char *bulk_in_buffer;
- struct urb *bulk_read_urb;
- int buffer_size;
- u8 bulk_address;
- spinlock_t lock; /* protects the following flags */
- bool throttled;
- bool actually_throttled;
bool rts;
- int outstanding_urbs;
};

/* max number of write urbs in flight */
#define URB_UPPER_LIMIT 4

-static void opticon_bulk_callback(struct urb *urb)
+static void opticon_process_read_urb(struct urb *urb)
{
- struct opticon_private *priv = urb->context;
+ struct usb_serial_port *port = urb->context;
+ struct opticon_private *priv = usb_get_serial_data(port->serial);
unsigned char *data = urb->transfer_buffer;
- struct usb_serial_port *port = priv->port;
- int status = urb->status;
- struct tty_struct *tty;
- int result;
int data_length;
-
- dbg("%s - port %d", __func__, port->number);
-
- switch (status) {
- case 0:
- /* success */
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d",
- __func__, status);
- return;
- default:
- dbg("%s - nonzero urb status received: %d",
- __func__, status);
- goto exit;
- }
-
- usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length,
- data);
+ struct tty_struct *tty;

if (urb->actual_length > 2) {
data_length = urb->actual_length - 2;
@@ -87,10 +52,10 @@ static void opticon_bulk_callback(struct urb *urb)
* Data from the device comes with a 2 byte header:
*
* <0x00><0x00>data...
- * This is real data to be sent to the tty layer
- * <0x00><0x01)level
- * This is a RTS level change, the third byte is the RTS
- * value (0 for low, 1 for high).
+ * This is real data to be sent to the tty layer
+ * <0x00><0x01>level
+ * This is a RTS level change, the third byte is the RTS
+ * value (0 for low, 1 for high).
*/
if ((data[0] == 0x00) && (data[1] == 0x00)) {
/* real data, send it to the tty layer */
@@ -108,269 +73,71 @@ static void opticon_bulk_callback(struct urb *urb)
else
priv->rts = true;
} else {
- dev_dbg(&priv->udev->dev,
+ dev_dbg(&port->dev,
"Unknown data packet received from the device:"
" %2x %2x\n",
data[0], data[1]);
}
}
} else {
- dev_dbg(&priv->udev->dev,
+ dev_dbg(&port->dev,
"Improper amount of data received from the device, "
"%d bytes", urb->actual_length);
}
-
-exit:
- spin_lock(&priv->lock);
-
- /* Continue trying to always read if we should */
- if (!priv->throttled) {
- usb_fill_bulk_urb(priv->bulk_read_urb, priv->udev,
- usb_rcvbulkpipe(priv->udev,
- priv->bulk_address),
- priv->bulk_in_buffer, priv->buffer_size,
- opticon_bulk_callback, priv);
- result = usb_submit_urb(priv->bulk_read_urb, GFP_ATOMIC);
- if (result)
- dev_err(&port->dev,
- "%s - failed resubmitting read urb, error %d\n",
- __func__, result);
- } else
- priv->actually_throttled = true;
- spin_unlock(&priv->lock);
-}
-
-static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port)
-{
- struct opticon_private *priv = usb_get_serial_data(port->serial);
- unsigned long flags;
- int result = 0;
-
- dbg("%s - port %d", __func__, port->number);
-
- spin_lock_irqsave(&priv->lock, flags);
- priv->throttled = false;
- priv->actually_throttled = false;
- priv->port = port;
- spin_unlock_irqrestore(&priv->lock, flags);
-
- /* Start reading from the device */
- usb_fill_bulk_urb(priv->bulk_read_urb, priv->udev,
- usb_rcvbulkpipe(priv->udev,
- priv->bulk_address),
- priv->bulk_in_buffer, priv->buffer_size,
- opticon_bulk_callback, priv);
- result = usb_submit_urb(priv->bulk_read_urb, GFP_KERNEL);
- if (result)
- dev_err(&port->dev,
- "%s - failed resubmitting read urb, error %d\n",
- __func__, result);
- return result;
-}
-
-static void opticon_close(struct usb_serial_port *port)
-{
- struct opticon_private *priv = usb_get_serial_data(port->serial);
-
- dbg("%s - port %d", __func__, port->number);
-
- /* shutdown our urbs */
- usb_kill_urb(priv->bulk_read_urb);
-}
-
-static void opticon_write_bulk_callback(struct urb *urb)
-{
- struct opticon_private *priv = urb->context;
- int status = urb->status;
- unsigned long flags;
-
- /* free up the transfer buffer, as usb_free_urb() does not do this */
- kfree(urb->transfer_buffer);
-
- /* setup packet may be set if we're using it for writing */
- kfree(urb->setup_packet);
-
- if (status)
- dbg("%s - nonzero write bulk status received: %d",
- __func__, status);
-
- spin_lock_irqsave(&priv->lock, flags);
- --priv->outstanding_urbs;
- spin_unlock_irqrestore(&priv->lock, flags);
-
- usb_serial_port_softint(priv->port);
}

static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count)
{
- struct opticon_private *priv = usb_get_serial_data(port->serial);
- struct usb_serial *serial = port->serial;
- struct urb *urb;
- unsigned char *buffer;
- unsigned long flags;
- int status;
-
dbg("%s - port %d", __func__, port->number);

- spin_lock_irqsave(&priv->lock, flags);
- if (priv->outstanding_urbs > URB_UPPER_LIMIT) {
- spin_unlock_irqrestore(&priv->lock, flags);
- dbg("%s - write limit hit", __func__);
- return 0;
- }
- priv->outstanding_urbs++;
- spin_unlock_irqrestore(&priv->lock, flags);
-
- buffer = kmalloc(count, GFP_ATOMIC);
- if (!buffer) {
- dev_err(&port->dev, "out of memory\n");
- count = -ENOMEM;
- goto error_no_buffer;
- }
-
- urb = usb_alloc_urb(0, GFP_ATOMIC);
- if (!urb) {
- dev_err(&port->dev, "no more free urbs\n");
- count = -ENOMEM;
- goto error_no_urb;
- }
-
- memcpy(buffer, buf, count);
-
- usb_serial_debug_data(debug, &port->dev, __func__, count, buffer);
-
- if (port->bulk_out_endpointAddress) {
- usb_fill_bulk_urb(urb, serial->dev,
- usb_sndbulkpipe(serial->dev,
- port->bulk_out_endpointAddress),
- buffer, count, opticon_write_bulk_callback, priv);
- } else {
- struct usb_ctrlrequest *dr;
-
- dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_NOIO);
- if (!dr)
- return -ENOMEM;
-
- dr->bRequestType = USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT;
- dr->bRequest = 0x01;
- dr->wValue = 0;
- dr->wIndex = 0;
- dr->wLength = cpu_to_le16(count);
-
- usb_fill_control_urb(urb, serial->dev,
- usb_sndctrlpipe(serial->dev, 0),
- (unsigned char *)dr, buffer, count,
- opticon_write_bulk_callback, priv);
- }
-
- /* send it down the pipe */
- status = usb_submit_urb(urb, GFP_ATOMIC);
- if (status) {
- dev_err(&port->dev,
- "%s - usb_submit_urb(write bulk) failed with status = %d\n",
- __func__, status);
- count = status;
- goto error;
- }
-
- /* we are done with this urb, so let the host driver
- * really free it when it is finished with it */
- usb_free_urb(urb);
-
- return count;
-error:
- usb_free_urb(urb);
-error_no_urb:
- kfree(buffer);
-error_no_buffer:
- spin_lock_irqsave(&priv->lock, flags);
- --priv->outstanding_urbs;
- spin_unlock_irqrestore(&priv->lock, flags);
- return count;
+ if (port->bulk_out_endpointAddress)
+ return usb_serial_generic_write(tty, port, buf, count);
+ else
+ return usb_control_msg(port->serial->dev,
+ usb_sndctrlpipe(port->serial->dev, 0),
+ 0x01,
+ USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
+ 0, 0,
+ (void *)buf, count, 100);
}

static int opticon_write_room(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
- struct opticon_private *priv = usb_get_serial_data(port->serial);
- unsigned long flags;
-
- dbg("%s - port %d", __func__, port->number);
-
- /*
- * We really can take almost anything the user throws at us
- * but let's pick a nice big number to tell the tty
- * layer that we have lots of free space, unless we don't.
- */
- spin_lock_irqsave(&priv->lock, flags);
- if (priv->outstanding_urbs > URB_UPPER_LIMIT * 2 / 3) {
- spin_unlock_irqrestore(&priv->lock, flags);
- dbg("%s - write limit hit", __func__);
- return 0;
- }
- spin_unlock_irqrestore(&priv->lock, flags);
-
- return 2048;
+ if (port->bulk_out_endpointAddress)
+ return usb_serial_generic_write_room(tty);
+ else
+ return 64;
}

static void opticon_throttle(struct tty_struct *tty)
{
- struct usb_serial_port *port = tty->driver_data;
- struct opticon_private *priv = usb_get_serial_data(port->serial);
- unsigned long flags;
-
- dbg("%s - port %d", __func__, port->number);
- spin_lock_irqsave(&priv->lock, flags);
- priv->throttled = true;
- spin_unlock_irqrestore(&priv->lock, flags);
+ usb_serial_generic_throttle(tty);
}


static void opticon_unthrottle(struct tty_struct *tty)
{
- struct usb_serial_port *port = tty->driver_data;
- struct opticon_private *priv = usb_get_serial_data(port->serial);
- unsigned long flags;
- int result, was_throttled;
-
- dbg("%s - port %d", __func__, port->number);
-
- spin_lock_irqsave(&priv->lock, flags);
- priv->throttled = false;
- was_throttled = priv->actually_throttled;
- priv->actually_throttled = false;
- spin_unlock_irqrestore(&priv->lock, flags);
-
- priv->bulk_read_urb->dev = port->serial->dev;
- if (was_throttled) {
- result = usb_submit_urb(priv->bulk_read_urb, GFP_ATOMIC);
- if (result)
- dev_err(&port->dev,
- "%s - failed submitting read urb, error %d\n",
- __func__, result);
- }
+ usb_serial_generic_unthrottle(tty);
}

static int opticon_tiocmget(struct tty_struct *tty, struct file *file)
{
struct usb_serial_port *port = tty->driver_data;
struct opticon_private *priv = usb_get_serial_data(port->serial);
- unsigned long flags;
int result = 0;

dbg("%s - port %d", __func__, port->number);

- spin_lock_irqsave(&priv->lock, flags);
if (priv->rts)
result = TIOCM_RTS;
- spin_unlock_irqrestore(&priv->lock, flags);

dbg("%s - %x", __func__, result);
return result;
}

-static int get_serial_info(struct opticon_private *priv,
+static int get_serial_info(struct usb_serial_port *port,
struct serial_struct __user *serial)
{
struct serial_struct tmp;
@@ -382,9 +149,7 @@ static int get_serial_info(struct opticon_private *priv,

/* fake emulate a 16550 uart to make userspace code happy */
tmp.type = PORT_16550A;
- tmp.line = priv->serial->minor;
- tmp.port = 0;
- tmp.irq = 0;
+ tmp.line = port->serial->minor;
tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
tmp.xmit_fifo_size = 1024;
tmp.baud_base = 9600;
@@ -400,26 +165,27 @@ static int opticon_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
struct usb_serial_port *port = tty->driver_data;
- struct opticon_private *priv = usb_get_serial_data(port->serial);

dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);

switch (cmd) {
case TIOCGSERIAL:
- return get_serial_info(priv,
+ return get_serial_info(port,
(struct serial_struct __user *)arg);
}

return -ENOIOCTLCMD;
}

-static int opticon_startup(struct usb_serial *serial)
+static int opticon_attach(struct usb_serial *serial)
{
struct opticon_private *priv;
- struct usb_host_interface *intf;
- int i;
- int retval = -ENOMEM;
- bool bulk_in_found = false;
+
+ if (serial->num_bulk_in != 1 || serial->num_bulk_out > 1) {
+ dev_err(&serial->dev->dev,
+ "Error - the proper endpoints were not found!\n");
+ return -EINVAL;
+ }

/* create our private serial structure */
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
@@ -427,70 +193,9 @@ static int opticon_startup(struct usb_serial *serial)
dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__);
return -ENOMEM;
}
- spin_lock_init(&priv->lock);
- priv->serial = serial;
- priv->port = serial->port[0];
- priv->udev = serial->dev;
-
- /* find our bulk endpoint */
- intf = serial->interface->altsetting;
- for (i = 0; i < intf->desc.bNumEndpoints; ++i) {
- struct usb_endpoint_descriptor *endpoint;
-
- endpoint = &intf->endpoint[i].desc;
- if (!usb_endpoint_is_bulk_in(endpoint))
- continue;
-
- priv->bulk_read_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!priv->bulk_read_urb) {
- dev_err(&priv->udev->dev, "out of memory\n");
- goto error;
- }
-
- priv->buffer_size = le16_to_cpu(endpoint->wMaxPacketSize) * 2;
- priv->bulk_in_buffer = kmalloc(priv->buffer_size, GFP_KERNEL);
- if (!priv->bulk_in_buffer) {
- dev_err(&priv->udev->dev, "out of memory\n");
- goto error;
- }
-
- priv->bulk_address = endpoint->bEndpointAddress;
-
- /* set up our bulk urb */
- usb_fill_bulk_urb(priv->bulk_read_urb, priv->udev,
- usb_rcvbulkpipe(priv->udev,
- endpoint->bEndpointAddress),
- priv->bulk_in_buffer, priv->buffer_size,
- opticon_bulk_callback, priv);
-
- bulk_in_found = true;
- break;
- }
-
- if (!bulk_in_found) {
- dev_err(&priv->udev->dev,
- "Error - the proper endpoints were not found!\n");
- goto error;
- }

usb_set_serial_data(serial, priv);
return 0;
-
-error:
- usb_free_urb(priv->bulk_read_urb);
- kfree(priv->bulk_in_buffer);
- kfree(priv);
- return retval;
-}
-
-static void opticon_disconnect(struct usb_serial *serial)
-{
- struct opticon_private *priv = usb_get_serial_data(serial);
-
- dbg("%s", __func__);
-
- usb_kill_urb(priv->bulk_read_urb);
- usb_free_urb(priv->bulk_read_urb);
}

static void opticon_release(struct usb_serial *serial)
@@ -499,44 +204,17 @@ static void opticon_release(struct usb_serial *serial)

dbg("%s", __func__);

- kfree(priv->bulk_in_buffer);
kfree(priv);
}

-static int opticon_suspend(struct usb_interface *intf, pm_message_t message)
-{
- struct usb_serial *serial = usb_get_intfdata(intf);
- struct opticon_private *priv = usb_get_serial_data(serial);
-
- usb_kill_urb(priv->bulk_read_urb);
- return 0;
-}
-
-static int opticon_resume(struct usb_interface *intf)
-{
- struct usb_serial *serial = usb_get_intfdata(intf);
- struct opticon_private *priv = usb_get_serial_data(serial);
- struct usb_serial_port *port = serial->port[0];
- int result;
-
- mutex_lock(&port->port.mutex);
- /* This is protected by the port mutex against close/open */
- if (test_bit(ASYNCB_INITIALIZED, &port->port.flags))
- result = usb_submit_urb(priv->bulk_read_urb, GFP_NOIO);
- else
- result = 0;
- mutex_unlock(&port->port.mutex);
- return result;
-}
-
static struct usb_driver opticon_driver = {
.name = "opticon",
.probe = usb_serial_probe,
.disconnect = usb_serial_disconnect,
- .suspend = opticon_suspend,
- .resume = opticon_resume,
+ .suspend = usb_serial_suspend,
+ .resume = usb_serial_resume,
.id_table = id_table,
- .no_dynamic_id = 1,
+ .no_dynamic_id = 1,
};

static struct usb_serial_driver opticon_device = {
@@ -545,16 +223,15 @@ static struct usb_serial_driver opticon_device = {
.name = "opticon",
},
.id_table = id_table,
- .usb_driver = &opticon_driver,
+ .usb_driver = &opticon_driver,
.num_ports = 1,
- .attach = opticon_startup,
- .open = opticon_open,
- .close = opticon_close,
+ .bulk_out_size = 1024,
+ .attach = opticon_attach,
.write = opticon_write,
- .write_room = opticon_write_room,
- .disconnect = opticon_disconnect,
+ .write_room = opticon_write_room,
+ .process_read_urb = opticon_process_read_urb,
.release = opticon_release,
- .throttle = opticon_throttle,
+ .throttle = opticon_throttle,
.unthrottle = opticon_unthrottle,
.ioctl = opticon_ioctl,
.tiocmget = opticon_tiocmget,
--
1.7.0.4


\
 
 \ /
  Last update: 2010-10-23 20:47    [W:0.092 / U:0.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site