lkml.org 
[lkml]   [2010]   [Oct]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH] regulator: twl-regulator - fix twlreg_set_mode
From
Date
The Singular Message is 16 bits:
DEV_GRP[15:13] MT[12] RES_ID[11:4] RES_STATE[3:0]

Current implementation return immedially after sucessfuly write MSB part.
To properly set mode, we need to write the complete message ( MSB and LSB ).

In twl.h, now we have defines for PM Master module register offsets,
use it instead of hard coded 0x15/0x16.

Use "message & 0xff" to ensure we send correct value for LSB.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
---

I don't have this hardware handy, I appreciate if someone who has the
hardware can test this patch.

Regards,
Axel

drivers/regulator/twl-regulator.c | 6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c
index 7e5892e..a57262a 100644
--- a/drivers/regulator/twl-regulator.c
+++ b/drivers/regulator/twl-regulator.c
@@ -219,12 +219,12 @@ static int twlreg_set_mode(struct regulator_dev *rdev, unsigned mode)
return -EACCES;

status = twl_i2c_write_u8(TWL_MODULE_PM_MASTER,
- message >> 8, 0x15 /* PB_WORD_MSB */ );
- if (status >= 0)
+ message >> 8, TWL4030_PM_MASTER_PB_WORD_MSB);
+ if (status < 0)
return status;

return twl_i2c_write_u8(TWL_MODULE_PM_MASTER,
- message, 0x16 /* PB_WORD_LSB */ );
+ message & 0xff, TWL4030_PM_MASTER_PB_WORD_LSB);
}

/*----------------------------------------------------------------------*/
--
1.7.2




\
 
 \ /
  Last update: 2010-10-22 10:39    [W:0.047 / U:3.796 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site