lkml.org 
[lkml]   [2010]   [Oct]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 11/12] davinci: add tnetv107x evm backlight device
Date
The tnetv107x evm board has a backlight device that is connected on one of the
SSP ports. This patch adds the board definitions necessary to plug the
backlight driver to the GPIO corresponding to this SSP pin.

Signed-off-by: Cyril Chemparathy <cyril@ti.com>
---
arch/arm/mach-davinci/board-tnetv107x-evm.c | 9 +++++++++
1 files changed, 9 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c
index 270ba26..ca61f8a 100644
--- a/arch/arm/mach-davinci/board-tnetv107x-evm.c
+++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c
@@ -45,6 +45,7 @@
#define EVM_MMC_WP_GPIO 21
#define EVM_MMC_CD_GPIO 24
#define EVM_SPI_CS_GPIO 54
+#define EVM_BACKLIGHT_GPIO (SSP_GPIO_START + 2)

static int initialize_gpio(int gpio, char *desc)
{
@@ -360,6 +361,12 @@ static struct spi_board_info spi_info[] __initconst = {
},
};

+static struct platform_device backlight_device = {
+ .name = "tps6116x",
+ .id = -1,
+ .dev.platform_data = (void *)EVM_BACKLIGHT_GPIO,
+};
+
static __init void tnetv107x_evm_board_init(void)
{
davinci_cfg_reg_list(sdio1_pins);
@@ -368,6 +375,8 @@ static __init void tnetv107x_evm_board_init(void)

tnetv107x_devices_init(&evm_device_info);

+ platform_device_register(&backlight_device);
+
spi_register_board_info(spi_info, ARRAY_SIZE(spi_info));
}

--
1.7.0.4


\
 
 \ /
  Last update: 2010-10-21 23:07    [from the cache]
©2003-2014 Jasper Spaans. Advertise on this site