lkml.org 
[lkml]   [2010]   [Oct]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 5/6] hid: egalax: Add event filtering
From
Date
On Wed, 2010-10-13 at 15:58 +0200, Henrik Rydberg wrote:
> Use estimated signal-to-noise ratios to reduce noise and limit the
> amount of events emitted.
>
> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
> ---
> drivers/hid/hid-egalax.c | 16 ++++++++++------
> 1 files changed, 10 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/hid/hid-egalax.c b/drivers/hid/hid-egalax.c
> index 2aba897..b21e7dc 100644
> --- a/drivers/hid/hid-egalax.c
> +++ b/drivers/hid/hid-egalax.c
> @@ -27,6 +27,10 @@ MODULE_LICENSE("GPL");
>
> #define MAX_EVENTS 120
>
> +/* estimated signal-to-noise ratios */
> +#define SN_MOVE 1024
> +#define SN_PRESSURE 32
> +
> struct egalax_data {
> __u16 x, y, z;
> __u8 id;
> @@ -59,17 +63,17 @@ static int egalax_input_mapping(struct hid_device *hdev, struct hid_input *hi,
> field->logical_maximum <<= 3;
> hid_map_usage(hi, usage, bit, max,
> EV_ABS, ABS_MT_POSITION_X);
> - set_abs(input, ABS_MT_POSITION_X, field, 0);
> + set_abs(input, ABS_MT_POSITION_X, field, SN_MOVE);
> /* touchscreen emulation */
> - set_abs(input, ABS_X, field, 0);
> + set_abs(input, ABS_X, field, SN_MOVE);
> return 1;
> case HID_GD_Y:
> field->logical_maximum <<= 3;
> hid_map_usage(hi, usage, bit, max,
> EV_ABS, ABS_MT_POSITION_Y);
> - set_abs(input, ABS_MT_POSITION_Y, field, 0);
> + set_abs(input, ABS_MT_POSITION_Y, field, SN_MOVE);
> /* touchscreen emulation */
> - set_abs(input, ABS_Y, field, 0);
> + set_abs(input, ABS_Y, field, SN_MOVE);
> return 1;
> }
> return 0;
> @@ -96,9 +100,9 @@ static int egalax_input_mapping(struct hid_device *hdev, struct hid_input *hi,
> field->logical_minimum = 0;
> hid_map_usage(hi, usage, bit, max,
> EV_ABS, ABS_MT_PRESSURE);
> - set_abs(input, ABS_MT_PRESSURE, field, 0);
> + set_abs(input, ABS_MT_PRESSURE, field, SN_PRESSURE);
> /* touchscreen emulation */
> - set_abs(input, ABS_PRESSURE, field, 0);
> + set_abs(input, ABS_PRESSURE, field, SN_PRESSURE);
> return 1;
> }
> return 0;

Seems obvious.

Acked-by: Chase Douglas <chase.douglas@canonical.com>



\
 
 \ /
  Last update: 2010-10-13 19:57    [W:0.096 / U:0.452 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site