lkml.org 
[lkml]   [2010]   [Oct]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCHv3 3/5] misc: Driver for APDS990X ALS and proximity sensors
Date
This is a driver for Avago APDS990X combined ALS and proximity sensor.

Interface is sysfs based. The driver uses interrupts to provide new data.
The driver supports pm_runtime and regulator frameworks.

See Documentation/misc-devices/apds990x.txt for details

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
---
drivers/misc/apds990x.c | 1295 ++++++++++++++++++++++++++++++++++++++++++
include/linux/i2c/apds990x.h | 79 +++
2 files changed, 1374 insertions(+), 0 deletions(-)
create mode 100644 drivers/misc/apds990x.c
create mode 100644 include/linux/i2c/apds990x.h

diff --git a/drivers/misc/apds990x.c b/drivers/misc/apds990x.c
new file mode 100644
index 0000000..200311f
--- /dev/null
+++ b/drivers/misc/apds990x.c
@@ -0,0 +1,1295 @@
+/*
+ * This file is part of the APDS990x sensor driver.
+ * Chip is combined proximity and ambient light sensor.
+ *
+ * Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+ *
+ * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/mutex.h>
+#include <linux/regulator/consumer.h>
+#include <linux/pm_runtime.h>
+#include <linux/delay.h>
+#include <linux/wait.h>
+#include <linux/slab.h>
+#include <linux/i2c/apds990x.h>
+
+/* Register map */
+#define APDS990X_ENABLE 0x00 /* Enable of states and interrupts */
+#define APDS990X_ATIME 0x01 /* ALS ADC time */
+#define APDS990X_PTIME 0x02 /* Proximity ADC time */
+#define APDS990X_WTIME 0x03 /* Wait time */
+#define APDS990X_AILTL 0x04 /* ALS interrupt low threshold low byte */
+#define APDS990X_AILTH 0x05 /* ALS interrupt low threshold hi byte */
+#define APDS990X_AIHTL 0x06 /* ALS interrupt hi threshold low byte */
+#define APDS990X_AIHTH 0x07 /* ALS interrupt hi threshold hi byte */
+#define APDS990X_PILTL 0x08 /* Proximity interrupt low threshold low byte */
+#define APDS990X_PILTH 0x09 /* Proximity interrupt low threshold hi byte */
+#define APDS990X_PIHTL 0x0a /* Proximity interrupt hi threshold low byte */
+#define APDS990X_PIHTH 0x0b /* Proximity interrupt hi threshold hi byte */
+#define APDS990X_PERS 0x0c /* Interrupt persistence filters */
+#define APDS990X_CONFIG 0x0d /* Configuration */
+#define APDS990X_PPCOUNT 0x0e /* Proximity pulse count */
+#define APDS990X_CONTROL 0x0f /* Gain control register */
+#define APDS990X_REV 0x11 /* Revision Number */
+#define APDS990X_ID 0x12 /* Device ID */
+#define APDS990X_STATUS 0x13 /* Device status */
+#define APDS990X_CDATAL 0x14 /* Clear ADC low data register */
+#define APDS990X_CDATAH 0x15 /* Clear ADC high data register */
+#define APDS990X_IRDATAL 0x16 /* IR ADC low data register */
+#define APDS990X_IRDATAH 0x17 /* IR ADC high data register */
+#define APDS990X_PDATAL 0x18 /* Proximity ADC low data register */
+#define APDS990X_PDATAH 0x19 /* Proximity ADC high data register */
+
+/* Control */
+#define APDS990X_MAX_AGAIN 3
+
+/* Enable register */
+#define APDS990X_EN_PIEN (0x1 << 5)
+#define APDS990X_EN_AIEN (0x1 << 4)
+#define APDS990X_EN_WEN (0x1 << 3)
+#define APDS990X_EN_PEN (0x1 << 2)
+#define APDS990X_EN_AEN (0x1 << 1)
+#define APDS990X_EN_PON (0x1 << 0)
+#define APDS990X_EN_DISABLE_ALL 0
+
+/* Status register */
+#define APDS990X_ST_PINT (0x1 << 5)
+#define APDS990X_ST_AINT (0x1 << 4)
+
+/* I2C access types */
+#define APDS990x_CMD_TYPE_MASK (0x03 << 5)
+#define APDS990x_CMD_TYPE_RB (0x00 << 5) /* Repeated byte */
+#define APDS990x_CMD_TYPE_INC (0x01 << 5) /* Auto increment */
+#define APDS990x_CMD_TYPE_SPE (0x03 << 5) /* Special function */
+
+#define APDS990x_ADDR_SHIFT 0
+#define APDS990x_CMD 0x80
+
+/* Interrupt ack commands */
+#define APDS990X_INT_ACK_ALS 0x6
+#define APDS990X_INT_ACK_PS 0x5
+#define APDS990X_INT_ACK_BOTH 0x7
+
+/* ptime */
+#define APDS990X_PTIME_DEFAULT 0xff /* Recommended conversion time 2.7ms*/
+
+/* wtime */
+#define APDS990X_WTIME_DEFAULT 0xee /* ~50ms wait time */
+
+#define APDS990X_TIME_TO_ADC 1024 /* One timetick as ADC count value */
+
+/* Persistence */
+#define APDS990X_APERS_SHIFT 0
+#define APDS990X_PPERS_SHIFT 4
+
+/* Supported ID:s */
+#define APDS990X_ID_0 0x0
+#define APDS990X_ID_4 0x4
+#define APDS990X_ID_29 0x29
+
+/* pgain and pdiode settings */
+#define APDS_PGAIN_1X 0x0
+#define APDS_PDIODE_IR 0x2
+
+#define APDS990X_LUX_OUTPUT_SCALE 10
+
+/* Reverse chip factors for threshold calculation */
+struct reverse_factors {
+ u32 afactor;
+ int cf1;
+ int irf1;
+ int cf2;
+ int irf2;
+};
+
+struct apds990x_chip {
+ struct apds990x_platform_data *pdata;
+ struct i2c_client *client;
+ struct mutex mutex; /* avoid parallel access */
+ struct regulator_bulk_data regs[2];
+ wait_queue_head_t wait;
+
+ int prox_en;
+ bool prox_continuous_mode;
+ bool lux_wait_fresh_res;
+
+ /* Chip parameters */
+ struct apds990x_chip_factors cf;
+ struct reverse_factors rcf;
+ u16 atime; /* als integration time */
+ u16 arate; /* als reporting rate */
+ u16 a_max_result; /* Max possible ADC value with current atime */
+ u8 again_meas; /* Gain used in last measurement */
+ u8 again_next; /* Next calculated gain */
+ u8 pgain;
+ u8 pdiode;
+ u8 pdrive;
+ u8 lux_persistence;
+ u8 prox_persistence;
+
+ u32 lux_raw;
+ u32 lux;
+ u16 lux_clear;
+ u16 lux_ir;
+ u16 lux_calib;
+ u32 lux_thres_hi;
+ u32 lux_thres_lo;
+
+ u32 prox_thres;
+ u16 prox_data;
+ u16 prox_calib;
+
+ char chipname[10];
+ u8 revision;
+};
+
+#define APDS_CALIB_SCALER 8192
+#define APDS_LUX_NEUTRAL_CALIB_VALUE (1 * APDS_CALIB_SCALER)
+#define APDS_PROX_NEUTRAL_CALIB_VALUE (1 * APDS_CALIB_SCALER)
+
+#define APDS_PROX_DEF_THRES 600
+#define APDS_PROX_HYSTERESIS 50
+#define APDS_LUX_DEF_THRES_HI 101
+#define APDS_LUX_DEF_THRES_LO 100
+#define APDS_DEFAULT_PROX_PERS 1
+
+#define APDS_TIMEOUT 2000
+#define APDS_STARTUP_DELAY 25000 /* us */
+#define APDS_RANGE 65535
+#define APDS_PROX_RANGE 1023
+#define APDS_LUX_GAIN_LO_LIMIT 100
+#define APDS_LUX_GAIN_LO_LIMIT_STRICT 25
+
+#define TIMESTEP 87 /* 2.7ms is about 87 / 32 */
+#define TIME_STEP_SCALER 32
+
+#define APDS_LUX_AVERAGING_TIME 50 /* tolerates 50/60Hz ripple */
+#define APDS_LUX_DEFAULT_RATE 200
+
+static const u8 again[] = {1, 8, 16, 120}; /* ALS gain steps */
+static const u8 ir_currents[] = {100, 50, 25, 12}; /* IRled currents in mA */
+
+/* Following two tables must match i.e 10Hz rate means 1 as persistence value */
+static const u16 arates_hz[] = {10, 5, 2, 1};
+static const u8 apersis[] = {1, 2, 4, 5};
+
+/* Regulators */
+static const char reg_vcc[] = "Vdd";
+static const char reg_vled[] = "Vled";
+
+static int apds990x_read_byte(struct apds990x_chip *chip, u8 reg, u8 *data)
+{
+ struct i2c_client *client = chip->client;
+ s32 ret;
+
+ reg &= ~APDS990x_CMD_TYPE_MASK;
+ reg |= APDS990x_CMD | APDS990x_CMD_TYPE_RB;
+
+ ret = i2c_smbus_read_byte_data(client, reg);
+ *data = ret;
+ return (int)ret;
+}
+
+static int apds990x_read_word(struct apds990x_chip *chip, u8 reg, u16 *data)
+{
+ struct i2c_client *client = chip->client;
+ s32 ret;
+
+ reg &= ~APDS990x_CMD_TYPE_MASK;
+ reg |= APDS990x_CMD | APDS990x_CMD_TYPE_INC;
+
+ ret = i2c_smbus_read_word_data(client, reg);
+ *data = ret;
+ return (int)ret;
+}
+
+static int apds990x_write_byte(struct apds990x_chip *chip, u8 reg, u8 data)
+{
+ struct i2c_client *client = chip->client;
+ s32 ret;
+
+ reg &= ~APDS990x_CMD_TYPE_MASK;
+ reg |= APDS990x_CMD | APDS990x_CMD_TYPE_RB;
+
+ ret = i2c_smbus_write_byte_data(client, reg, data);
+ return (int)ret;
+}
+
+static int apds990x_write_word(struct apds990x_chip *chip, u8 reg, u16 data)
+{
+ struct i2c_client *client = chip->client;
+ s32 ret;
+
+ reg &= ~APDS990x_CMD_TYPE_MASK;
+ reg |= APDS990x_CMD | APDS990x_CMD_TYPE_INC;
+
+ ret = i2c_smbus_write_word_data(client, reg, data);
+ return (int)ret;
+}
+
+static int apds990x_mode_on(struct apds990x_chip *chip)
+{
+ /* ALS is mandatory, proximity optional */
+ u8 reg = APDS990X_EN_AIEN | APDS990X_EN_PON | APDS990X_EN_AEN |
+ APDS990X_EN_WEN;
+
+ if (chip->prox_en)
+ reg |= APDS990X_EN_PIEN | APDS990X_EN_PEN;
+
+ return apds990x_write_byte(chip, APDS990X_ENABLE, reg);
+}
+
+static u16 apds990x_lux_to_threshold(struct apds990x_chip *chip, u32 lux)
+{
+ u32 thres;
+ u32 cpl;
+ u32 ir;
+
+ if (lux == 0)
+ return 0;
+ else if (lux == APDS_RANGE)
+ return APDS_RANGE;
+
+ /*
+ * Reported LUX value is a combination of the IR and CLEAR channel
+ * values. However, interrupt threshold is only for clear channel.
+ * This function approximates needed HW threshold value for a given
+ * LUX value in the current lightning type.
+ * IR level compared to visible light varies heavily depending on the
+ * source of the light
+ *
+ * Calculate threshold value for the next measurement period.
+ * Math: threshold = lux * cpl where
+ * cpl = atime * again / (glass_attenuation * device_factor)
+ * (count-per-lux)
+ *
+ * First remove calibration. Division by four is to avoid overflow
+ */
+ lux = lux * (APDS_CALIB_SCALER / 4) / (chip->lux_calib / 4);
+
+ /* Multiplication by 64 is to increase accuracy */
+ cpl = ((u32)chip->atime * (u32)again[chip->again_next] *
+ APDS_PARAM_SCALE * 64) / (chip->cf.ga * chip->cf.df);
+
+ thres = lux * cpl / 64;
+ /*
+ * Convert IR light from the latest result to match with
+ * new gain step. This helps to adapt with the current
+ * source of light.
+ */
+ ir = (u32)chip->lux_ir * (u32)again[chip->again_next] /
+ (u32)again[chip->again_meas];
+
+ /*
+ * Compensate count with IR light impact
+ * IAC1 > IAC2 (see apds990x_get_lux for formulas)
+ */
+ if (chip->lux_clear * APDS_PARAM_SCALE >=
+ chip->rcf.afactor * chip->lux_ir)
+ thres = (chip->rcf.cf1 * thres + chip->rcf.irf1 * ir) /
+ APDS_PARAM_SCALE;
+ else
+ thres = (chip->rcf.cf2 * thres + chip->rcf.irf2 * ir) /
+ APDS_PARAM_SCALE;
+
+ if (thres >= chip->a_max_result)
+ thres = chip->a_max_result - 1;
+ return thres;
+}
+
+static inline int apds990x_set_atime(struct apds990x_chip *chip, u32 time_ms)
+{
+ u8 reg_value;
+
+ chip->atime = time_ms;
+ /* Formula is specified in the data sheet */
+ reg_value = 256 - ((time_ms * TIME_STEP_SCALER) / TIMESTEP);
+ /* Calculate max ADC value for given integration time */
+ chip->a_max_result = (u16)(256 - reg_value) * APDS990X_TIME_TO_ADC;
+ return apds990x_write_byte(chip, APDS990X_ATIME, reg_value);
+}
+
+/* Called always with mutex locked */
+static int apds990x_refresh_pthres(struct apds990x_chip *chip, int data)
+{
+ int ret, lo, hi;
+
+ /* If the chip is not in use, don't try to access it */
+ if (pm_runtime_suspended(&chip->client->dev))
+ return 0;
+
+ if (data < chip->prox_thres) {
+ lo = 0;
+ hi = chip->prox_thres;
+ } else {
+ lo = chip->prox_thres - APDS_PROX_HYSTERESIS;
+ if (chip->prox_continuous_mode)
+ hi = chip->prox_thres;
+ else
+ hi = APDS_RANGE;
+ }
+
+ ret = apds990x_write_word(chip, APDS990X_PILTL, lo);
+ ret |= apds990x_write_word(chip, APDS990X_PIHTL, hi);
+ return ret;
+}
+
+/* Called always with mutex locked */
+static int apds990x_refresh_athres(struct apds990x_chip *chip)
+{
+ int ret;
+ /* If the chip is not in use, don't try to access it */
+ if (pm_runtime_suspended(&chip->client->dev))
+ return 0;
+
+ ret = apds990x_write_word(chip, APDS990X_AILTL,
+ apds990x_lux_to_threshold(chip, chip->lux_thres_lo));
+ ret |= apds990x_write_word(chip, APDS990X_AIHTL,
+ apds990x_lux_to_threshold(chip, chip->lux_thres_hi));
+
+ return ret;
+}
+
+/* Called always with mutex locked */
+static void apds990x_force_a_refresh(struct apds990x_chip *chip)
+{
+ /* This will force ALS interrupt after the next measurement. */
+ apds990x_write_word(chip, APDS990X_AILTL, APDS_LUX_DEF_THRES_LO);
+ apds990x_write_word(chip, APDS990X_AIHTL, APDS_LUX_DEF_THRES_HI);
+}
+
+/* Called always with mutex locked */
+static void apds990x_force_p_refresh(struct apds990x_chip *chip)
+{
+ /* This will force proximity interrupt after the next measurement. */
+ apds990x_write_word(chip, APDS990X_PILTL, APDS_PROX_DEF_THRES - 1);
+ apds990x_write_word(chip, APDS990X_PIHTL, APDS_PROX_DEF_THRES);
+}
+
+/* Called always with mutex locked */
+static int apds990x_calc_again(struct apds990x_chip *chip)
+{
+ int curr_again = chip->again_meas;
+ int next_again = chip->again_meas;
+ int ret = 0;
+
+ /* Calculate suitable als gain */
+ if (chip->lux_clear == chip->a_max_result)
+ next_again -= 2; /* ALS saturated. Decrease gain by 2 steps */
+ else if (chip->lux_clear > chip->a_max_result / 2)
+ next_again--;
+ else if (chip->lux_clear < APDS_LUX_GAIN_LO_LIMIT_STRICT)
+ next_again += 2; /* Too dark. Increase gain by 2 steps */
+ else if (chip->lux_clear < APDS_LUX_GAIN_LO_LIMIT)
+ next_again++;
+
+ /* Limit gain to available range */
+ if (next_again < 0)
+ next_again = 0;
+ else if (next_again > APDS990X_MAX_AGAIN)
+ next_again = APDS990X_MAX_AGAIN;
+
+ /* Let's check can we trust the measured result */
+ if (chip->lux_clear == chip->a_max_result)
+ /* Result can be totally garbage due to saturation */
+ ret = -ERANGE;
+ else if (next_again != curr_again &&
+ chip->lux_clear < APDS_LUX_GAIN_LO_LIMIT_STRICT)
+ /*
+ * Gain is changed and measurement result is very small.
+ * Result can be totally garbage due to underflow
+ */
+ ret = -ERANGE;
+
+ chip->again_next = next_again;
+ apds990x_write_byte(chip, APDS990X_CONTROL,
+ (chip->pdrive << 6) |
+ (chip->pdiode << 4) |
+ (chip->pgain << 2) |
+ (chip->again_next << 0));
+
+ /*
+ * Error means bad result -> re-measurement is needed. The forced
+ * refresh uses fastest possible persistence setting to get result
+ * as soon as possible.
+ */
+ if (ret < 0)
+ apds990x_force_a_refresh(chip);
+ else
+ apds990x_refresh_athres(chip);
+
+ return ret;
+}
+
+/* Called always with mutex locked */
+static int apds990x_get_lux(struct apds990x_chip *chip, int clear, int ir)
+{
+ int iac, iac1, iac2; /* IR adjusted counts */
+ u32 lpc; /* Lux per count */
+
+ /* Formulas:
+ * iac1 = CF1 * CLEAR_CH - IRF1 * IR_CH
+ * iac2 = CF2 * CLEAR_CH - IRF2 * IR_CH
+ */
+ iac1 = (chip->cf.cf1 * clear - chip->cf.irf1 * ir) / APDS_PARAM_SCALE;
+ iac2 = (chip->cf.cf2 * clear - chip->cf.irf2 * ir) / APDS_PARAM_SCALE;
+
+ iac = max(iac1, iac2);
+ iac = max(iac, 0);
+
+ lpc = APDS990X_LUX_OUTPUT_SCALE * (chip->cf.df * chip->cf.ga) /
+ (u32)(again[chip->again_meas] * (u32)chip->atime);
+
+ return (iac * lpc) / APDS_PARAM_SCALE;
+}
+
+static int apds990x_ack_int(struct apds990x_chip *chip, u8 mode)
+{
+ struct i2c_client *client = chip->client;
+ s32 ret;
+ u8 reg = APDS990x_CMD | APDS990x_CMD_TYPE_SPE;
+
+ switch (mode & (APDS990X_ST_AINT | APDS990X_ST_PINT)) {
+ case APDS990X_ST_AINT:
+ reg |= APDS990X_INT_ACK_ALS;
+ break;
+ case APDS990X_ST_PINT:
+ reg |= APDS990X_INT_ACK_PS;
+ break;
+ default:
+ reg |= APDS990X_INT_ACK_BOTH;
+ break;
+ }
+
+ ret = i2c_smbus_read_byte_data(client, reg);
+ return (int)ret;
+}
+
+static irqreturn_t apds990x_irq(int irq, void *data)
+{
+ struct apds990x_chip *chip = data;
+ u8 status;
+
+ apds990x_read_byte(chip, APDS990X_STATUS, &status);
+ apds990x_ack_int(chip, status);
+
+ mutex_lock(&chip->mutex);
+ if (!pm_runtime_suspended(&chip->client->dev)) {
+ if (status & APDS990X_ST_AINT) {
+ apds990x_read_word(chip, APDS990X_CDATAL,
+ &chip->lux_clear);
+ apds990x_read_word(chip, APDS990X_IRDATAL,
+ &chip->lux_ir);
+ /* Store used gain for calculations */
+ chip->again_meas = chip->again_next;
+
+ chip->lux_raw = apds990x_get_lux(chip,
+ chip->lux_clear,
+ chip->lux_ir);
+
+ if (apds990x_calc_again(chip) == 0) {
+ /* Result is valid */
+ chip->lux = chip->lux_raw;
+ chip->lux_wait_fresh_res = false;
+ wake_up(&chip->wait);
+ sysfs_notify(&chip->client->dev.kobj,
+ NULL, "lux0_input");
+ }
+ }
+
+ if ((status & APDS990X_ST_PINT) && chip->prox_en) {
+ u16 clr_ch;
+
+ apds990x_read_word(chip, APDS990X_CDATAL, &clr_ch);
+ /*
+ * If ALS channel is saturated at min gain,
+ * proximity gives false posivite values.
+ * Just ignore them.
+ */
+ if (chip->again_meas == 0 &&
+ clr_ch == chip->a_max_result)
+ chip->prox_data = 0;
+ else
+ apds990x_read_word(chip,
+ APDS990X_PDATAL,
+ &chip->prox_data);
+
+ apds990x_refresh_pthres(chip, chip->prox_data);
+ if (chip->prox_data < chip->prox_thres)
+ chip->prox_data = 0;
+ else if (!chip->prox_continuous_mode)
+ chip->prox_data = APDS_PROX_RANGE;
+ sysfs_notify(&chip->client->dev.kobj,
+ NULL, "prox0_raw");
+ }
+ }
+ mutex_unlock(&chip->mutex);
+ return IRQ_HANDLED;
+}
+
+static int apds990x_configure(struct apds990x_chip *chip)
+{
+ /* It is recommended to use disabled mode during these operations */
+ apds990x_write_byte(chip, APDS990X_ENABLE, APDS990X_EN_DISABLE_ALL);
+
+ /* conversion and wait times for different state machince states */
+ apds990x_write_byte(chip, APDS990X_PTIME, APDS990X_PTIME_DEFAULT);
+ apds990x_write_byte(chip, APDS990X_WTIME, APDS990X_WTIME_DEFAULT);
+ apds990x_set_atime(chip, APDS_LUX_AVERAGING_TIME);
+
+ apds990x_write_byte(chip, APDS990X_CONFIG, 0);
+
+ /* Persistence levels */
+ apds990x_write_byte(chip, APDS990X_PERS,
+ (chip->lux_persistence << APDS990X_APERS_SHIFT) |
+ (chip->prox_persistence << APDS990X_PPERS_SHIFT));
+
+ apds990x_write_byte(chip, APDS990X_PPCOUNT, chip->pdata->ppcount);
+
+ /* Start with relatively small gain */
+ chip->again_meas = 1;
+ chip->again_next = 1;
+ apds990x_write_byte(chip, APDS990X_CONTROL,
+ (chip->pdrive << 6) |
+ (chip->pdiode << 4) |
+ (chip->pgain << 2) |
+ (chip->again_next << 0));
+ return 0;
+}
+
+static int apds990x_detect(struct apds990x_chip *chip)
+{
+ struct i2c_client *client = chip->client;
+ int ret;
+ u8 id;
+
+ ret = apds990x_read_byte(chip, APDS990X_ID, &id);
+ if (ret < 0) {
+ dev_err(&client->dev, "ID read failed\n");
+ return ret;
+ }
+
+ ret = apds990x_read_byte(chip, APDS990X_REV, &chip->revision);
+ if (ret < 0) {
+ dev_err(&client->dev, "REV read failed\n");
+ return ret;
+ }
+
+ switch (id) {
+ case APDS990X_ID_0:
+ case APDS990X_ID_4:
+ case APDS990X_ID_29:
+ snprintf(chip->chipname, sizeof(chip->chipname), "APDS-990x");
+ break;
+ default:
+ ret = -ENODEV;
+ break;
+ }
+ return ret;
+}
+
+static int apds990x_chip_on(struct apds990x_chip *chip)
+{
+ int err = regulator_bulk_enable(ARRAY_SIZE(chip->regs),
+ chip->regs);
+ if (err < 0)
+ return err;
+
+ usleep_range(APDS_STARTUP_DELAY, 2 * APDS_STARTUP_DELAY);
+
+ /* Refresh all configs in case of regulators were off */
+ chip->prox_data = 0;
+ apds990x_configure(chip);
+ apds990x_mode_on(chip);
+ return 0;
+}
+
+static int apds990x_chip_off(struct apds990x_chip *chip)
+{
+ apds990x_write_byte(chip, APDS990X_ENABLE, APDS990X_EN_DISABLE_ALL);
+ regulator_bulk_disable(ARRAY_SIZE(chip->regs), chip->regs);
+ return 0;
+}
+
+static ssize_t apds990x_lux_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct apds990x_chip *chip = dev_get_drvdata(dev);
+ ssize_t ret;
+ u32 result;
+ long timeout;
+
+ if (pm_runtime_suspended(dev))
+ return -EIO;
+
+ timeout = wait_event_interruptible_timeout(chip->wait,
+ !chip->lux_wait_fresh_res,
+ msecs_to_jiffies(APDS_TIMEOUT));
+ if (!timeout)
+ return -EIO;
+
+ mutex_lock(&chip->mutex);
+ result = (chip->lux * chip->lux_calib) / APDS_CALIB_SCALER;
+ if (result > (APDS_RANGE * APDS990X_LUX_OUTPUT_SCALE))
+ result = APDS_RANGE * APDS990X_LUX_OUTPUT_SCALE;
+
+ ret = sprintf(buf, "%d.%d\n",
+ result / APDS990X_LUX_OUTPUT_SCALE,
+ result % APDS990X_LUX_OUTPUT_SCALE);
+ mutex_unlock(&chip->mutex);
+ return ret;
+}
+
+static DEVICE_ATTR(lux0_input, S_IRUGO, apds990x_lux_show, NULL);
+
+static ssize_t apds990x_lux_range_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%u\n", APDS_RANGE);
+}
+
+static DEVICE_ATTR(lux0_sensor_range, S_IRUGO, apds990x_lux_range_show, NULL);
+
+static ssize_t apds990x_lux_calib_format_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%u\n", APDS_CALIB_SCALER);
+}
+
+static DEVICE_ATTR(lux0_calibscale_default, S_IRUGO,
+ apds990x_lux_calib_format_show, NULL);
+
+static ssize_t apds990x_lux_calib_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct apds990x_chip *chip = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%u\n", chip->lux_calib);
+}
+
+static ssize_t apds990x_lux_calib_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct apds990x_chip *chip = dev_get_drvdata(dev);
+ unsigned long value;
+
+ if (strict_strtoul(buf, 0, &value))
+ return -EINVAL;
+
+ if (chip->lux_calib > APDS_RANGE)
+ return -EINVAL;
+
+ chip->lux_calib = value;
+
+ return len;
+}
+
+static DEVICE_ATTR(lux0_calibscale, S_IRUGO | S_IWUSR, apds990x_lux_calib_show,
+ apds990x_lux_calib_store);
+
+static ssize_t apds990x_rate_avail(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int i;
+ int pos = 0;
+ for (i = 0; i < ARRAY_SIZE(arates_hz); i++)
+ pos += sprintf(buf + pos, "%d ", arates_hz[i]);
+ sprintf(buf + pos - 1, "\n");
+ return pos;
+}
+
+static ssize_t apds990x_rate_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct apds990x_chip *chip = dev_get_drvdata(dev);
+ return sprintf(buf, "%d\n", chip->arate);
+}
+
+static int apds990x_set_arate(struct apds990x_chip *chip, int rate)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(arates_hz); i++)
+ if (rate >= arates_hz[i])
+ break;
+
+ if (i == ARRAY_SIZE(arates_hz))
+ return -EINVAL;
+
+ /* Pick up corresponding persistence value */
+ chip->lux_persistence = apersis[i];
+ chip->arate = arates_hz[i];
+
+ /* If the chip is not in use, don't try to access it */
+ if (pm_runtime_suspended(&chip->client->dev))
+ return 0;
+
+ /* Persistence levels */
+ return apds990x_write_byte(chip, APDS990X_PERS,
+ (chip->lux_persistence << APDS990X_APERS_SHIFT) |
+ (chip->prox_persistence << APDS990X_PPERS_SHIFT));
+}
+
+static ssize_t apds990x_rate_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct apds990x_chip *chip = dev_get_drvdata(dev);
+ unsigned long value;
+ int ret;
+
+ if (strict_strtoul(buf, 0, &value))
+ return -EINVAL;
+
+ mutex_lock(&chip->mutex);
+ ret = apds990x_set_arate(chip, value);
+ mutex_unlock(&chip->mutex);
+
+ if (ret < 0)
+ return ret;
+ return len;
+}
+
+static DEVICE_ATTR(lux0_rate_avail, S_IRUGO, apds990x_rate_avail, NULL);
+
+static DEVICE_ATTR(lux0_rate, S_IRUGO | S_IWUSR, apds990x_rate_show,
+ apds990x_rate_store);
+
+static ssize_t apds990x_prox_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ ssize_t ret;
+ struct apds990x_chip *chip = dev_get_drvdata(dev);
+ if (pm_runtime_suspended(dev) || !chip->prox_en)
+ return -EIO;
+
+ mutex_lock(&chip->mutex);
+ ret = sprintf(buf, "%d\n", chip->prox_data);
+ mutex_unlock(&chip->mutex);
+ return ret;
+}
+
+static DEVICE_ATTR(prox0_raw, S_IRUGO, apds990x_prox_show, NULL);
+
+static ssize_t apds990x_prox_range_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%u\n", APDS_PROX_RANGE);
+}
+
+static DEVICE_ATTR(prox0_sensor_range, S_IRUGO, apds990x_prox_range_show, NULL);
+
+static ssize_t apds990x_prox_enable_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct apds990x_chip *chip = dev_get_drvdata(dev);
+ return sprintf(buf, "%d\n", chip->prox_en);
+}
+
+static ssize_t apds990x_prox_enable_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct apds990x_chip *chip = dev_get_drvdata(dev);
+ unsigned long value;
+
+ if (strict_strtoul(buf, 0, &value))
+ return -EINVAL;
+
+ mutex_lock(&chip->mutex);
+
+ if (!chip->prox_en)
+ chip->prox_data = 0;
+
+ if (value)
+ chip->prox_en++;
+ else if (chip->prox_en > 0)
+ chip->prox_en--;
+
+ if (!pm_runtime_suspended(dev))
+ apds990x_mode_on(chip);
+ mutex_unlock(&chip->mutex);
+ return len;
+}
+
+static DEVICE_ATTR(prox0_raw_en, S_IRUGO | S_IWUSR, apds990x_prox_enable_show,
+ apds990x_prox_enable_store);
+
+static const char reporting_modes[][9] = {"trigger", "periodic"};
+
+static ssize_t apds990x_prox_reporting_mode_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct apds990x_chip *chip = dev_get_drvdata(dev);
+ return sprintf(buf, "%s\n",
+ reporting_modes[!!chip->prox_continuous_mode]);
+}
+
+static ssize_t apds990x_prox_reporting_mode_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct apds990x_chip *chip = dev_get_drvdata(dev);
+
+ if (sysfs_streq(buf, reporting_modes[0]))
+ chip->prox_continuous_mode = 0;
+ else if (sysfs_streq(buf, reporting_modes[1]))
+ chip->prox_continuous_mode = 1;
+ else
+ return -EINVAL;
+ return len;
+}
+
+static DEVICE_ATTR(prox0_reporting_mode, S_IRUGO | S_IWUSR,
+ apds990x_prox_reporting_mode_show,
+ apds990x_prox_reporting_mode_store);
+
+static ssize_t apds990x_prox_reporting_avail_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%s %s\n", reporting_modes[0], reporting_modes[1]);
+}
+
+static DEVICE_ATTR(prox0_reporting_mode_avail, S_IRUGO | S_IWUSR,
+ apds990x_prox_reporting_avail_show, NULL);
+
+
+static ssize_t apds990x_lux_thresh_above_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct apds990x_chip *chip = dev_get_drvdata(dev);
+ return sprintf(buf, "%d\n", chip->lux_thres_hi);
+}
+
+static ssize_t apds990x_lux_thresh_below_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct apds990x_chip *chip = dev_get_drvdata(dev);
+ return sprintf(buf, "%d\n", chip->lux_thres_lo);
+}
+
+static ssize_t apds990x_set_lux_thresh(struct apds990x_chip *chip, u32 *target,
+ const char *buf)
+{
+ int ret = 0;
+ unsigned long thresh;
+
+ if (strict_strtoul(buf, 0, &thresh))
+ return -EINVAL;
+
+ if (thresh > APDS_RANGE)
+ return -EINVAL;
+
+ mutex_lock(&chip->mutex);
+ *target = thresh;
+ /*
+ * Don't update values in HW if we are still waiting for
+ * first interrupt to come after device handle open call.
+ */
+ if (!chip->lux_wait_fresh_res)
+ apds990x_refresh_athres(chip);
+ mutex_unlock(&chip->mutex);
+ return ret;
+
+}
+
+static ssize_t apds990x_lux_thresh_above_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct apds990x_chip *chip = dev_get_drvdata(dev);
+ int ret = apds990x_set_lux_thresh(chip, &chip->lux_thres_hi, buf);
+ if (ret < 0)
+ return ret;
+ return len;
+}
+
+static ssize_t apds990x_lux_thresh_below_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct apds990x_chip *chip = dev_get_drvdata(dev);
+ int ret = apds990x_set_lux_thresh(chip, &chip->lux_thres_lo, buf);
+ if (ret < 0)
+ return ret;
+ return len;
+}
+
+static DEVICE_ATTR(lux0_thresh_above_value, S_IRUGO | S_IWUSR,
+ apds990x_lux_thresh_above_show,
+ apds990x_lux_thresh_above_store);
+
+static DEVICE_ATTR(lux0_thresh_below_value, S_IRUGO | S_IWUSR,
+ apds990x_lux_thresh_below_show,
+ apds990x_lux_thresh_below_store);
+
+static ssize_t apds990x_prox_threshold_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct apds990x_chip *chip = dev_get_drvdata(dev);
+ return sprintf(buf, "%d\n", chip->prox_thres);
+}
+
+static ssize_t apds990x_prox_threshold_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct apds990x_chip *chip = dev_get_drvdata(dev);
+ unsigned long value;
+
+ if (strict_strtoul(buf, 0, &value))
+ return -EINVAL;
+
+ if ((value > APDS_RANGE) || (value == 0) ||
+ (value < APDS_PROX_HYSTERESIS))
+ return -EINVAL;
+
+ mutex_lock(&chip->mutex);
+ chip->prox_thres = value;
+
+ apds990x_force_p_refresh(chip);
+ mutex_unlock(&chip->mutex);
+ return len;
+}
+
+static DEVICE_ATTR(prox0_thresh_above_value, S_IRUGO | S_IWUSR,
+ apds990x_prox_threshold_show,
+ apds990x_prox_threshold_store);
+
+static ssize_t apds990x_power_state_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", !pm_runtime_suspended(dev));
+ return 0;
+}
+
+static ssize_t apds990x_power_state_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct apds990x_chip *chip = dev_get_drvdata(dev);
+ unsigned long value;
+
+ if (strict_strtoul(buf, 0, &value))
+ return -EINVAL;
+ if (value) {
+ pm_runtime_get_sync(dev);
+ mutex_lock(&chip->mutex);
+ chip->lux_wait_fresh_res = true;
+ apds990x_force_a_refresh(chip);
+ apds990x_force_p_refresh(chip);
+ mutex_unlock(&chip->mutex);
+ } else {
+ if (!pm_runtime_suspended(dev))
+ pm_runtime_put(dev);
+ }
+ return len;
+}
+
+static DEVICE_ATTR(power_state, S_IRUGO | S_IWUSR,
+ apds990x_power_state_show,
+ apds990x_power_state_store);
+
+static ssize_t apds990x_chip_id_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct apds990x_chip *chip = dev_get_drvdata(dev);
+ return sprintf(buf, "%s %d\n", chip->chipname, chip->revision);
+}
+
+static DEVICE_ATTR(chip_id, S_IRUGO, apds990x_chip_id_show, NULL);
+
+static struct attribute *sysfs_attrs_ctrl[] = {
+ &dev_attr_lux0_calibscale.attr,
+ &dev_attr_lux0_calibscale_default.attr,
+ &dev_attr_lux0_input.attr,
+ &dev_attr_lux0_sensor_range.attr,
+ &dev_attr_lux0_rate.attr,
+ &dev_attr_lux0_rate_avail.attr,
+ &dev_attr_lux0_thresh_above_value.attr,
+ &dev_attr_lux0_thresh_below_value.attr,
+ &dev_attr_prox0_raw_en.attr,
+ &dev_attr_prox0_raw.attr,
+ &dev_attr_prox0_sensor_range.attr,
+ &dev_attr_prox0_thresh_above_value.attr,
+ &dev_attr_prox0_reporting_mode.attr,
+ &dev_attr_prox0_reporting_mode_avail.attr,
+ &dev_attr_chip_id.attr,
+ &dev_attr_power_state.attr,
+ NULL
+};
+
+static struct attribute_group apds990x_attribute_group[] = {
+ {.attrs = sysfs_attrs_ctrl },
+};
+
+static int __devinit apds990x_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct apds990x_chip *chip;
+ int err;
+
+ chip = kzalloc(sizeof *chip, GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, chip);
+ chip->client = client;
+
+ init_waitqueue_head(&chip->wait);
+ mutex_init(&chip->mutex);
+ chip->pdata = client->dev.platform_data;
+
+ if (chip->pdata == NULL) {
+ dev_err(&client->dev, "platform data is mandatory\n");
+ err = -EINVAL;
+ goto fail1;
+ }
+
+ if (chip->pdata->cf.ga == 0) {
+ /* set uncovered sensor default parameters */
+ chip->cf.ga = 1966; /* 0.48 * APDS_PARAM_SCALE */
+ chip->cf.cf1 = 4096; /* 1.00 * APDS_PARAM_SCALE */
+ chip->cf.irf1 = 9134; /* 2.23 * APDS_PARAM_SCALE */
+ chip->cf.cf2 = 2867; /* 0.70 * APDS_PARAM_SCALE */
+ chip->cf.irf2 = 5816; /* 1.42 * APDS_PARAM_SCALE */
+ chip->cf.df = 52;
+ } else {
+ chip->cf = chip->pdata->cf;
+ }
+
+ /* precalculate inverse chip factors for threshold control */
+ chip->rcf.afactor =
+ (chip->cf.irf1 - chip->cf.irf2) * APDS_PARAM_SCALE /
+ (chip->cf.cf1 - chip->cf.cf2);
+ chip->rcf.cf1 = APDS_PARAM_SCALE * APDS_PARAM_SCALE /
+ chip->cf.cf1;
+ chip->rcf.irf1 = chip->cf.irf1 * APDS_PARAM_SCALE /
+ chip->cf.cf1;
+ chip->rcf.cf2 = APDS_PARAM_SCALE * APDS_PARAM_SCALE /
+ chip->cf.cf2;
+ chip->rcf.irf2 = chip->cf.irf2 * APDS_PARAM_SCALE /
+ chip->cf.cf2;
+
+ /* Set something to start with */
+ chip->lux_thres_hi = APDS_LUX_DEF_THRES_HI;
+ chip->lux_thres_lo = APDS_LUX_DEF_THRES_LO;
+ chip->lux_calib = APDS_LUX_NEUTRAL_CALIB_VALUE;
+
+ chip->prox_thres = APDS_PROX_DEF_THRES;
+ chip->pdrive = chip->pdata->pdrive;
+ chip->pdiode = APDS_PDIODE_IR;
+ chip->pgain = APDS_PGAIN_1X;
+ chip->prox_calib = APDS_PROX_NEUTRAL_CALIB_VALUE;
+ chip->prox_persistence = APDS_DEFAULT_PROX_PERS;
+ chip->prox_continuous_mode = false;
+
+ chip->regs[0].supply = reg_vcc;
+ chip->regs[1].supply = reg_vled;
+
+ err = regulator_bulk_get(&client->dev,
+ ARRAY_SIZE(chip->regs), chip->regs);
+ if (err < 0) {
+ dev_err(&client->dev, "Cannot get regulators\n");
+ goto fail1;
+ }
+
+ err = regulator_bulk_enable(ARRAY_SIZE(chip->regs), chip->regs);
+ if (err < 0) {
+ dev_err(&client->dev, "Cannot enable regulators\n");
+ goto fail2;
+ }
+
+ usleep_range(APDS_STARTUP_DELAY, 2 * APDS_STARTUP_DELAY);
+
+ err = apds990x_detect(chip);
+ if (err < 0) {
+ dev_err(&client->dev, "APDS990X not found\n");
+ goto fail3;
+ }
+
+ pm_runtime_set_active(&client->dev);
+
+ apds990x_configure(chip);
+ apds990x_set_arate(chip, APDS_LUX_DEFAULT_RATE);
+ apds990x_mode_on(chip);
+
+ pm_runtime_enable(&client->dev);
+
+ if (chip->pdata->setup_resources) {
+ err = chip->pdata->setup_resources();
+ if (err) {
+ err = -EINVAL;
+ goto fail3;
+ }
+ }
+
+ err = sysfs_create_group(&chip->client->dev.kobj,
+ apds990x_attribute_group);
+ if (err < 0) {
+ dev_err(&chip->client->dev, "Sysfs registration failed\n");
+ goto fail4;
+ }
+
+ err = request_threaded_irq(client->irq, NULL,
+ apds990x_irq,
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_LOW |
+ IRQF_ONESHOT,
+ "apds990x", chip);
+ if (err) {
+ dev_err(&client->dev, "could not get IRQ %d\n",
+ client->irq);
+ goto fail5;
+ }
+ return err;
+fail5:
+ sysfs_remove_group(&chip->client->dev.kobj,
+ &apds990x_attribute_group[0]);
+fail4:
+ if (chip->pdata && chip->pdata->release_resources)
+ chip->pdata->release_resources();
+fail3:
+ regulator_bulk_disable(ARRAY_SIZE(chip->regs), chip->regs);
+fail2:
+ regulator_bulk_free(ARRAY_SIZE(chip->regs), chip->regs);
+fail1:
+ kfree(chip);
+ return err;
+}
+
+static int __devexit apds990x_remove(struct i2c_client *client)
+{
+ struct apds990x_chip *chip = i2c_get_clientdata(client);
+
+ free_irq(client->irq, chip);
+ sysfs_remove_group(&chip->client->dev.kobj,
+ apds990x_attribute_group);
+
+ if (chip->pdata && chip->pdata->release_resources)
+ chip->pdata->release_resources();
+
+ if (!pm_runtime_suspended(&client->dev))
+ apds990x_chip_off(chip);
+
+ pm_runtime_disable(&client->dev);
+ pm_runtime_set_suspended(&client->dev);
+
+ regulator_bulk_free(ARRAY_SIZE(chip->regs), chip->regs);
+
+ kfree(chip);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int apds990x_suspend(struct device *dev)
+{
+ struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+ struct apds990x_chip *chip = i2c_get_clientdata(client);
+
+ apds990x_chip_off(chip);
+ return 0;
+}
+
+static int apds990x_resume(struct device *dev)
+{
+ struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+ struct apds990x_chip *chip = i2c_get_clientdata(client);
+
+ /*
+ * If we were enabled at suspend time, it is expected
+ * everything works nice and smoothly. Chip_on is enough
+ */
+ apds990x_chip_on(chip);
+
+ return 0;
+}
+#else
+#define apds990x_suspend NULL
+#define apds990x_resume NULL
+#define apds990x_shutdown NULL
+#endif
+
+#ifdef CONFIG_PM_RUNTIME
+static int apds990x_runtime_suspend(struct device *dev)
+{
+ struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+ struct apds990x_chip *chip = i2c_get_clientdata(client);
+
+ apds990x_chip_off(chip);
+ return 0;
+}
+
+static int apds990x_runtime_resume(struct device *dev)
+{
+ struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+ struct apds990x_chip *chip = i2c_get_clientdata(client);
+
+ apds990x_chip_on(chip);
+ return 0;
+}
+
+#endif
+
+static const struct i2c_device_id apds990x_id[] = {
+ {"apds990x", 0 },
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, apds990x_id);
+
+static const struct dev_pm_ops apds990x_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(apds990x_suspend, apds990x_resume)
+ SET_RUNTIME_PM_OPS(apds990x_runtime_suspend,
+ apds990x_runtime_resume,
+ NULL)
+};
+
+static struct i2c_driver apds990x_driver = {
+ .driver = {
+ .name = "apds990x",
+ .owner = THIS_MODULE,
+ .pm = &apds990x_pm_ops,
+ },
+ .probe = apds990x_probe,
+ .remove = __devexit_p(apds990x_remove),
+ .id_table = apds990x_id,
+};
+
+static int __init apds990x_init(void)
+{
+ return i2c_add_driver(&apds990x_driver);
+}
+
+static void __exit apds990x_exit(void)
+{
+ i2c_del_driver(&apds990x_driver);
+}
+
+MODULE_DESCRIPTION("APDS990X combined ALS and proximity sensor");
+MODULE_AUTHOR("Samu Onkalo, Nokia Corporation");
+MODULE_LICENSE("GPL v2");
+
+module_init(apds990x_init);
+module_exit(apds990x_exit);
diff --git a/include/linux/i2c/apds990x.h b/include/linux/i2c/apds990x.h
new file mode 100644
index 0000000..d186fcc
--- /dev/null
+++ b/include/linux/i2c/apds990x.h
@@ -0,0 +1,79 @@
+/*
+ * This file is part of the APDS990x sensor driver.
+ * Chip is combined proximity and ambient light sensor.
+ *
+ * Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+ *
+ * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __APDS990X_H__
+#define __APDS990X_H__
+
+
+#define APDS_IRLED_CURR_12mA 0x3
+#define APDS_IRLED_CURR_25mA 0x2
+#define APDS_IRLED_CURR_50mA 0x1
+#define APDS_IRLED_CURR_100mA 0x0
+
+/**
+ * struct apds990x_chip_factors - defines effect of the cover window
+ * @ga: Total glass attenuation
+ * @cf1: clear channel factor 1 for raw to lux conversion
+ * @irf1: IR channel factor 1 for raw to lux conversion
+ * @cf2: clear channel factor 2 for raw to lux conversion
+ * @irf2: IR channel factor 2 for raw to lux conversion
+ * @df: device factor for conversion formulas
+ *
+ * Structure for tuning ALS calculation to match with environment.
+ * Values depend on the material above the sensor and the sensor
+ * itself. If the GA is zero, driver will use uncovered sensor default values
+ * format: decimal value * APDS_PARAM_SCALE except df which is plain integer.
+ */
+#define APDS_PARAM_SCALE 4096
+struct apds990x_chip_factors {
+ int ga;
+ int cf1;
+ int irf1;
+ int cf2;
+ int irf2;
+ int df;
+};
+
+/**
+ * struct apds990x_platform_data - platform data for apsd990x.c driver
+ * @cf: chip factor data
+ * @pddrive: IR-led driving current
+ * @ppcount: number of IR pulses used for proximity estimation
+ * @setup_resources: interrupt line setup call back function
+ * @release_resources: interrupt line release call back function
+ *
+ * Proximity detection result depends heavily on correct ppcount, pdrive
+ * and cover window.
+ *
+ */
+
+struct apds990x_platform_data {
+ struct apds990x_chip_factors cf;
+ u8 pdrive;
+ u8 ppcount;
+ int (*setup_resources)(void);
+ int (*release_resources)(void);
+};
+
+#endif
--
1.6.0.4


\
 
 \ /
  Last update: 2010-10-11 13:11    [W:0.117 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site