[lkml]   [2010]   [Oct]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH 2/2] pm_trace: Add sysfs attr for rechecking dev hash.

> If the device which fails to resume is part of a loadable kernel module
> it won't be checked at startup against the magic number stored in the
> RTC.
> Add a read-only sysfs attribute /sys/power/pm_trace_dev_hash which
> contains a list of newline separated devices (usually just the one)
> which currently match the last magic number. This allows the device
> which is failing to resume to be found after the modules are loaded
> again.

> --- a/Documentation/power/s2ram.txt
> +++ b/Documentation/power/s2ram.txt
> @@ -49,6 +49,13 @@ machine that doesn't boot) is:
> device (lspci and /sys/devices/pci* is your friend), and see if you can
> fix it, disable it, or trace into its resume function.
> + If no device matches the hash, it may be a device from a loadable kernel
> + module that is not loaded until after the hash is checked. You can check
> + the hash against the current devices again after more modules are loaded
> + using sysfs:
> +
> + cat /sys/power/pm_trace_dev_hash
> +

Yep, but exact semantics of that sysfs file should probably be linked
in the sysfs documentation...
(cesky, pictures)

 \ /
  Last update: 2010-10-10 20:07    [W:0.069 / U:8.028 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site