lkml.org 
[lkml]   [2010]   [Jan]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH 27/68] slc90e66: always program control bits
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] slc90e66: always program control bits

This matches behavior of libata pata_efar host driver.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/slc90e66.c | 12 ++++--------
1 file changed, 4 insertions(+), 8 deletions(-)

Index: b/drivers/ide/slc90e66.c
===================================================================
--- a/drivers/ide/slc90e66.c
+++ b/drivers/ide/slc90e66.c
@@ -50,20 +50,16 @@ static void slc90e66_set_pio_mode(ide_hw
if (is_slave) {
master_data |= 0x4000;
master_data &= ~0x0070;
- if (pio > 1) {
- /* Set PPE, IE and TIME */
- master_data |= control << 4;
- }
+ /* Set PPE, IE and TIME */
+ master_data |= control << 4;
pci_read_config_byte(dev, slave_port, &slave_data);
slave_data &= hwif->channel ? 0x0f : 0xf0;
slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) <<
(hwif->channel ? 4 : 0);
} else {
master_data &= ~0x3307;
- if (pio > 1) {
- /* enable PPE, IE and TIME */
- master_data |= control;
- }
+ /* enable PPE, IE and TIME */
+ master_data |= control;
master_data |= (timings[pio][0] << 12) | (timings[pio][1] << 8);
}
pci_write_config_word(dev, master_port, master_data);

\
 
 \ /
  Last update: 2010-01-29 17:21    [W:0.430 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site