lkml.org 
[lkml]   [2010]   [Jan]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Hang: 2.6.32.4 sky2/DMAR (was [PATCH] sky2: Fix WARNING: at lib/dma-debug.c:902 check_sync)
On 1/27/2010 12:56 PM, Stephen Hemminger wrote:
> On Wed, 27 Jan 2010 11:57:35 -0500
> Michael Breuer<mbreuer@majjas.com> wrote:
>
>
>> On 1/27/2010 11:50 AM, Stephen Hemminger wrote:
>>
>>> On Wed, 27 Jan 2010 10:34:51 -0500
>>> Michael Breuer<mbreuer@majjas.com> wrote:
>>>
>>>
>>>
>>>> On 01/23/2010 06:21 PM, Jarek Poplawski wrote:
>>>>
>>>>
>>>>> On Fri, Jan 22, 2010 at 06:50:21PM -0500, Michael Breuer wrote:
>>>>>
>>>>>
>>>>>
>>>>>> When the packets were dropped, there was a different sequence in the
>>>>>> log - DISCOVER/OFFER repeated. The "normal" is that the sequence
>>>>>> appeared correct and complete - DISCOVER/OFFER/REQUEST/ACK - or
>>>>>> INFORM/ACK (vs. INFORM repeatedly sans ACK) as the case may be.
>>>>>>
>>>>>>
>>>>>>
>>>>> Anyway, I'd be intersted if the switch matters here.
>>>>>
>>>>> Plus one more test: could you try to load sky2 with the parameter:
>>>>> "copybreak=1" (the rest as in any recent test, which gave you dmar
>>>>> errors; any switch).
>>>>>
>>>>> Thanks,
>>>>> Jarek P.
>>>>>
>>>>>
>>>>>
>>>> Ok - now up 80+ hours with copybreak=1. I'm going to redo w/o copybreak
>>>> to confirm that I haven't inadvertently fixed something. However, given
>>>> that it might be copybreak-related, I looked at sky2.c again and I'm
>>>> wondering about the copybreak max size in sky2_rx_start:
>>>>
>>>> size = roundup(sky2->netdev->mtu + ETH_HLEN + VLAN_HLEN, 8);
>>>>
>>>> /* Stopping point for hardware truncation */
>>>> thresh = (size - 8) / sizeof(u32);
>>>>
>>>> sky2->rx_nfrags = size>> PAGE_SHIFT;
>>>> BUG_ON(sky2->rx_nfrags> ARRAY_SIZE(re->frag_addr));
>>>>
>>>> /* Compute residue after pages */
>>>> size -= sky2->rx_nfrags<< PAGE_SHIFT;
>>>>
>>>> /* Optimize to handle small packets and headers */
>>>> if (size< copybreak)
>>>> size = copybreak;
>>>> if (size< ETH_HLEN)
>>>> size = ETH_HLEN;
>>>>
>>>>
>>>> Why would increasing size to copybreak be valid here?
>>>>
>>>> Guessing a bit as I'm not sure about rx_nfrags, but if I read this
>>>> correctly, if size is ever less than copybreak it's because there isn't
>>>> enough space left for anything larger. If so, wouldn't increasing size
>>>> potentially corrupt something? I'd further guess that the resulting
>>>> condition manifests sooner (or at least with a more visible effect) when
>>>> using DMAR.
>>>>
>>>> In any event, why "copybreak" as the minimum buffer size? I'd suggest
>>>> that if it isn't possible to allocate at least MTU + overhead that
>>>> sky2_rx_start ought to be delayed until there is room.
>>>>
>>>>
>>> This code is where driver decides how much data will be received in skb
>>> data area and the remaining data spills over into skb frags.
>>> Copybreak is the threshold so that packets less than size are copied
>>> to a new skb. The code doing the copying there assumes the data is
>>> totally contained in the skb (not in frags). The size increase there
>>> is to make sure that assumption is always true. I suppose you
>>> could do something perverse like setting copybreak really huge
>>> and confuse driver, but that is a user error.
>>>
>>>
>>>
>> Ok - but I'm wondering under what circumstances size would be<
>> copybreak in the first place after computing the residue. If size ends
>> up being unreasonably small, is simply increasing the number to whatever
>> copybreak is correct? Assuming my testing is correct, then the crash
>> I've been experiencing when using dmar (only) seems related to the value
>> of copybreak. I don't think the other use (skb reuse) is the issue (but
>> hey, I could have missed something). The crash occurs when copybreak is
>> the default of 128, didn't happen when I set copybreak to 1.
>>
> Does this change it? If so the dma code is (not sky2) is buggy and not
> rounding up properly.
>
> --- a/drivers/net/sky2.c 2010-01-27 09:46:10.940005248 -0800
> +++ b/drivers/net/sky2.c 2010-01-27 09:53:47.141267850 -0800
> @@ -2257,13 +2257,16 @@ static struct sk_buff *receive_copy(stru
>
> skb = netdev_alloc_skb_ip_align(sky2->netdev, length);
> if (likely(skb)) {
> + unsigned dma_align = dma_get_cache_alignment();
> + unsigned dma_size = ALIGN(length+1, dma_align);
> +
> pci_dma_sync_single_for_cpu(sky2->hw->pdev, re->data_addr,
> - length, PCI_DMA_FROMDEVICE);
> + dma_size, PCI_DMA_FROMDEVICE);
> skb_copy_from_linear_data(re->skb, skb->data, length);
> skb->ip_summed = re->skb->ip_summed;
> skb->csum = re->skb->csum;
> pci_dma_sync_single_for_device(sky2->hw->pdev, re->data_addr,
> - length, PCI_DMA_FROMDEVICE);
> + dma_size, PCI_DMA_FROMDEVICE);
> re->skb->ip_summed = CHECKSUM_NONE;
> skb_put(skb, length);
> }
>
Ok - will queue this - want to reconfirm that the system still crashes
w/o this (or copybreak). That should take a few days.


\
 
 \ /
  Last update: 2010-01-27 19:01    [W:0.167 / U:3.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site